[PATCH v7 03/15] crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot.
Gaurav Jain
gaurav.jain at nxp.com
Tue Dec 7 08:41:17 CET 2021
i.MX8MM/MN/MP/MQ - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
---
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/arch-imx8m/imx-regs.h | 1 +
arch/arm/mach-imx/imx8m/Kconfig | 18 ++++++++++++++++++
arch/arm/mach-imx/imx8m/soc.c | 10 +++++++++-
board/freescale/imx8mm_evk/spl.c | 9 ++++++++-
board/freescale/imx8mn_evk/spl.c | 8 ++++++--
board/freescale/imx8mp_evk/spl.c | 13 +++++++++++--
board/freescale/imx8mq_evk/spl.c | 9 +++++++--
drivers/crypto/fsl/jr.c | 14 +++++++++++---
scripts/config_whitelist.txt | 1 +
10 files changed, 73 insertions(+), 12 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f7f03837fe..550f884077 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -815,7 +815,7 @@ config ARCH_IMX8M
select ARM64
select GPIO_EXTRA_HEADER
select MACH_IMX
- select SYS_FSL_HAS_SEC if IMX_HAB
+ select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_I2C_MXC
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index b800da13a1..ff8de53f67 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -72,6 +72,7 @@
#define CONFIG_SYS_FSL_SEC_ADDR (CAAM_IPS_BASE_ADDR + \
CONFIG_SYS_FSL_SEC_OFFSET)
#define CONFIG_SYS_FSL_JR0_OFFSET (0x1000)
+#define CONFIG_SYS_FSL_JR1_OFFSET (0x2000)
#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_FSL_SEC_ADDR + \
CONFIG_SYS_FSL_JR0_OFFSET)
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 276b8bd974..a9acf6474f 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -38,6 +38,10 @@ config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
select IMX8MQ
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select MISC
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MQ_PHANBELL
bool "imx8mq_phanbell"
@@ -50,6 +54,10 @@ config TARGET_IMX8MM_EVK
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select MISC
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MM_ICORE_MX8MM
bool "Engicam i.Core MX8M Mini SOM"
@@ -88,6 +96,9 @@ config TARGET_IMX8MN_EVK
select IMX8MN
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select MISC
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MN_DDR4_EVK
bool "imx8mn DDR4 EVK board"
@@ -95,6 +106,9 @@ config TARGET_IMX8MN_DDR4_EVK
select IMX8MN
select SUPPORT_SPL
select IMX8M_DDR4
+ select FSL_CAAM
+ select MISC
+ select SPL_CRYPTO if SPL
config TARGET_IMX8MP_EVK
bool "imx8mp LPDDR4 EVK board"
@@ -102,6 +116,10 @@ config TARGET_IMX8MP_EVK
select IMX8MP
select SUPPORT_SPL
select IMX8M_LPDDR4
+ select FSL_CAAM
+ select MISC
+ select ARCH_MISC_INIT
+ select SPL_CRYPTO if SPL
config TARGET_PICO_IMX8MQ
bool "Support Technexion Pico iMX8MQ"
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 863508776d..0f9bd77354 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2017-2019 NXP
+ * Copyright 2017-2019, 2021 NXP
*
* Peng Fan <peng.fan at nxp.com>
*/
@@ -20,6 +20,7 @@
#include <asm/ptrace.h>
#include <asm/armv8/mmu.h>
#include <dm/uclass.h>
+#include <dm/device.h>
#include <efi_loader.h>
#include <env.h>
#include <env_internal.h>
@@ -1197,6 +1198,13 @@ static void acquire_buildinfo(void)
int arch_misc_init(void)
{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+
acquire_buildinfo();
return 0;
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 4ef7f6f180..c81128f442 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2019 NXP
+ * Copyright 2019, 2021 NXP
*/
#include <common.h>
@@ -51,6 +51,13 @@ static void spl_dram_init(void)
void spl_board_init(void)
{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+
puts("Normal Boot\n");
}
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 03f2a56e80..ab19dabf7b 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -1,7 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2019, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -49,6 +49,10 @@ void spl_board_init(void)
struct udevice *dev;
int ret;
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+
puts("Normal Boot\n");
ret = uclass_get_device_by_name(UCLASS_CLK,
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index eca42c756e..bcef96caa3 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -1,7 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Copyright 2018-2019 NXP
+ * Copyright 2018-2019, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -20,6 +20,8 @@
#include <asm/arch/ddr.h>
#include <power/pmic.h>
#include <power/pca9450.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -35,6 +37,13 @@ void spl_dram_init(void)
void spl_board_init(void)
{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+ if (ret)
+ printf("Failed to initialize %s: %d\n", dev->name, ret);
+
/*
* Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does
* not allow to change it. Should set the clock after PMIC
diff --git a/board/freescale/imx8mq_evk/spl.c b/board/freescale/imx8mq_evk/spl.c
index 67d069b2b0..8a47dd01a5 100644
--- a/board/freescale/imx8mq_evk/spl.c
+++ b/board/freescale/imx8mq_evk/spl.c
@@ -1,8 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
@@ -22,6 +21,7 @@
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <fsl_esdhc_imx.h>
+#include <fsl_sec.h>
#include <mmc.h>
#include <linux/delay.h>
#include <power/pmic.h>
@@ -199,6 +199,11 @@ int power_init_board(void)
void spl_board_init(void)
{
+#ifdef CONFIG_FSL_CAAM
+ if (sec_init())
+ printf("\nsec_init failed!\n");
+
+#endif
puts("Normal Boot\n");
}
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index 441550f348..9379b86955 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -43,9 +43,17 @@ struct udevice *caam_dev;
#define SEC_ADDR(idx) \
(ulong)((CONFIG_SYS_FSL_SEC_ADDR + sec_offset[idx]))
-#define SEC_JR0_ADDR(idx) \
+#ifndef CONFIG_IMX8M
+#define SEC_JR_ADDR(idx) \
(ulong)(SEC_ADDR(idx) + \
(CONFIG_SYS_FSL_JR0_OFFSET - CONFIG_SYS_FSL_SEC_OFFSET))
+#define JR_ID 0
+#else
+#define SEC_JR_ADDR(idx) \
+ (ulong)(SEC_ADDR(idx) + \
+ (CONFIG_SYS_FSL_JR1_OFFSET - CONFIG_SYS_FSL_SEC_OFFSET))
+#define JR_ID 1
+#endif
struct caam_regs caam_st;
#endif
@@ -669,8 +677,8 @@ int sec_init_idx(uint8_t sec_idx)
caam = dev_get_priv(caam_dev);
#else
caam_st.sec = (void *)SEC_ADDR(sec_idx);
- caam_st.regs = (struct jr_regs *)SEC_JR0_ADDR(sec_idx);
- caam_st.jrid = 0;
+ caam_st.regs = (struct jr_regs *)SEC_JR_ADDR(sec_idx);
+ caam_st.jrid = JR_ID;
caam = &caam_st;
#endif
ccsr_sec_t *sec = caam->sec;
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index b9c1c61e13..81de1a3793 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1848,6 +1848,7 @@ CONFIG_SYS_FSL_IFC_SIZE2
CONFIG_SYS_FSL_ISBC_VER
CONFIG_SYS_FSL_JR0_ADDR
CONFIG_SYS_FSL_JR0_OFFSET
+CONFIG_SYS_FSL_JR1_OFFSET
CONFIG_SYS_FSL_LS1_CLK_ADDR
CONFIG_SYS_FSL_LSCH3_SERDES_ADDR
CONFIG_SYS_FSL_MAX_NUM_OF_SEC
--
2.17.1
More information about the U-Boot
mailing list