[PATCH v7 08/15] i.MX8: Add crypto node in device tree
Gaurav Jain
gaurav.jain at nxp.com
Tue Dec 7 08:41:22 CET 2021
i.MX8(QM/QXP) - updated device tree for supporting DM in SPL.
disabled use of JR1 in SPL and uboot, as JR1 is reserved
for SECO FW.
Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
---
arch/arm/dts/fsl-imx8dx.dtsi | 61 +++++++++++++++++++++++-
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 34 ++++++++++++-
arch/arm/dts/fsl-imx8qm.dtsi | 61 +++++++++++++++++++++++-
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 34 ++++++++++++-
4 files changed, 186 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8dx.dtsi b/arch/arm/dts/fsl-imx8dx.dtsi
index 7d95cf0b7d..63a56699b5 100644
--- a/arch/arm/dts/fsl-imx8dx.dtsi
+++ b/arch/arm/dts/fsl-imx8dx.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -261,6 +261,30 @@
power-domains = <&pd_dma>;
};
};
+
+ pd_caam: PD_CAAM {
+ compatible = "nxp,imx8-pd";
+ reg = <SC_R_NONE>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_caam_jr1: PD_CAAM_JR1 {
+ reg = <SC_R_CAAM_JR1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ pd_caam_jr2: PD_CAAM_JR2 {
+ reg = <SC_R_CAAM_JR2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ pd_caam_jr3: PD_CAAM_JR3 {
+ reg = <SC_R_CAAM_JR3>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ };
};
i2c0: i2c at 5a800000 {
@@ -609,6 +633,41 @@
};
};
};
+
+ crypto: caam at 0x31400000 {
+ compatible = "fsl,sec-v4.0";
+ reg = <0 0x31400000 0 0x400000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x31400000 0x400000>;
+ fsl,first-jr-index = <2>;
+ fsl,sec-era = <9>;
+
+ sec_jr1: jr1 at 0x20000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x1000>;
+ interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr1>;
+ status = "disabled";
+ };
+
+ sec_jr2: jr2 at 30000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x1000>;
+ interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr2>;
+ status = "okay";
+ };
+
+ sec_jr3: jr3 at 40000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x1000>;
+ interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr3>;
+ status = "okay";
+ };
+ };
};
&A35_0 {
diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
index 9e0d264b71..a95209e141 100644
--- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*/
&{/imx8qm-pm} {
@@ -80,6 +80,22 @@
u-boot,dm-spl;
};
+&pd_caam {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr1 {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr2 {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr3 {
+ u-boot,dm-spl;
+};
+
&gpio0 {
u-boot,dm-spl;
};
@@ -126,3 +142,19 @@
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+&crypto {
+ u-boot,dm-spl;
+};
+
+&sec_jr1 {
+ u-boot,dm-spl;
+};
+
+&sec_jr2 {
+ u-boot,dm-spl;
+};
+
+&sec_jr3 {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/fsl-imx8qm.dtsi b/arch/arm/dts/fsl-imx8qm.dtsi
index 88aeaf65b3..517fb13cad 100644
--- a/arch/arm/dts/fsl-imx8qm.dtsi
+++ b/arch/arm/dts/fsl-imx8qm.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -235,6 +235,30 @@
wakeup-irq = <349>;
};
};
+
+ pd_caam: PD_CAAM {
+ compatible = "nxp,imx8-pd";
+ reg = <SC_R_NONE>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_caam_jr1: PD_CAAM_JR1 {
+ reg = <SC_R_CAAM_JR1>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ pd_caam_jr2: PD_CAAM_JR2 {
+ reg = <SC_R_CAAM_JR2>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ pd_caam_jr3: PD_CAAM_JR3 {
+ reg = <SC_R_CAAM_JR3>;
+ #power-domain-cells = <0>;
+ power-domains = <&pd_caam>;
+ };
+ };
};
i2c0: i2c at 5a800000 {
@@ -556,6 +580,41 @@
power-domains = <&pd_conn_enet1>;
status = "disabled";
};
+
+ crypto: caam at 0x31400000 {
+ compatible = "fsl,sec-v4.0";
+ reg = <0 0x31400000 0 0x400000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x31400000 0x400000>;
+ fsl,first-jr-index = <2>;
+ fsl,sec-era = <9>;
+
+ sec_jr1: jr1 at 0x20000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x1000>;
+ interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr1>;
+ status = "disabled";
+ };
+
+ sec_jr2: jr2 at 30000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x1000>;
+ interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr2>;
+ status = "okay";
+ };
+
+ sec_jr3: jr3 at 40000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x1000>;
+ interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_caam_jr3>;
+ status = "okay";
+ };
+ };
};
&A53_0 {
diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
index 701af4434d..ae037c7550 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018, 2021 NXP
*/
&{/imx8qx-pm} {
@@ -80,6 +80,22 @@
u-boot,dm-spl;
};
+&pd_caam {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr1 {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr2 {
+ u-boot,dm-spl;
+};
+
+&pd_caam_jr3 {
+ u-boot,dm-spl;
+};
+
&gpio0 {
u-boot,dm-spl;
};
@@ -126,3 +142,19 @@
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+&crypto {
+ u-boot,dm-spl;
+};
+
+&sec_jr1 {
+ u-boot,dm-spl;
+};
+
+&sec_jr2 {
+ u-boot,dm-spl;
+};
+
+&sec_jr3 {
+ u-boot,dm-spl;
+};
--
2.17.1
More information about the U-Boot
mailing list