[v2 14/18] configs/expu1: enable field fail-safe u-boot update

Aleksandar Gerasimovski aleksandar.gerasimovski at hitachienergy.com
Fri Dec 10 11:09:18 CET 2021


Field fail-safe u-boot update for pg-wcom-ls102x designs is introduced
with patch: 81fb05e.

This patch enables already added support by:
 - Defining default u-boot build as bootpackage (factory) image.
 - Defining u-boot update image location according to the EXPU1 NOR layout.
 - Extending mtd partitions according defined EXPU1 NOR layout.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachienergy.com>
---
 configs/pg_wcom_expu1_defconfig | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 9e8697d..0ff96e5 100644
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@@ -1,7 +1,10 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_TARGET_PG_WCOM_EXPU1=y
+CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
+CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y
 CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000
 CONFIG_SYS_MALLOC_LEN=0x1004000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_KM_DEF_NETDEV="eth2"
@@ -41,7 +44,7 @@ CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_CRAMFS=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),-(ubi0);68000000.flash:-(ubi1)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
-- 
1.8.3.1



More information about the U-Boot mailing list