[PATCH u-boot-marvell 00/10] PCI mvebu and aardvark changes

[Stefan Roese]

Hi Pali,

On 12/12/21 12:23, Pali Rohár wrote:
> On Thursday 11 November 2021 16:35:39 Marek Behún wrote:
>> From: Marek Behún <marek.behun at nic.cz>
>>
>> Hello Stefan,
>>
>> we have some more fixes for PCI (mvebu and aardvark), and one patch
>> for Turris MOX board code.
>>
>> Marek
> 
> Hello Stefan, patches 1, 2 and 7 still needs some modifications. But
> other remaining patches should be OK. Would you merge remaining patches?
> And then we can focus on issues with link initialization.

Sure, I can pull the "remaining patches" into next (for master it's too
late in the release cycle) if this helps. Just let me know and I'll go
through the patch queue in the next days to push more Marvell related
patches into next.

Thanks,
Stefan

>> Marek Behún (2):
>>    pci: pci_mvebu, pci_aardvark: Fix size of configuration cache
>>    arm: mvebu: turris_mox: Remove extra newline after module topology
>>
>> Pali Rohár (8):
>>    pci: pci_mvebu: Wait 100ms for Link Up in mvebu_pcie_probe()
>>    arm: mvebu: a38x: serdes: Move non-serdes PCIe code to pci_mvebu.c
>>    pci: pci_mvebu: Move setup for BAR[0] where other BARs are setup
>>    pci: pci_mvebu: Replace MBUS_PCI_*_SIZE by resource_size()
>>    pci: pci_mvebu: Do not allow setting ROM BAR on PCI Bridge
>>    pci: pci_mvebu: Fix PCIe MEM and IO resources assignment and mbus
>>      mapping
>>    pci: pci_mvebu: Remove unused DECLARE_GLOBAL_DATA_PTR
>>    arm: a37xx: pci: Do not allow setting ROM BAR on PCI Bridge
>>
>>   arch/arm/mach-mvebu/include/mach/cpu.h        |   4 +-
>>   arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h    |   4 -
>>   .../serdes/a38x/high_speed_env_spec.c         |  15 --
>>   board/CZ.NIC/turris_mox/turris_mox.c          |   3 -
>>   drivers/pci/pci-aardvark.c                    |  54 +++--
>>   drivers/pci/pci_mvebu.c                       | 205 ++++++++++++------
>>   6 files changed, 175 insertions(+), 110 deletions(-)
>>
>> -- 
>> 2.32.0
>>

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de