[PATCH 2/2] sunxi: configs: add defconfig for pine H64 model B

Daniel Wagenknecht dwagenk at mailbox.org
Tue Dec 14 21:59:32 CET 2021


It almost identical to the defconfig for pine H64 model A with only
the CONFIG_DEFAULT_DEVICE_TREE adapted.

The differences between the boards model A and model B are irrelevant
inside u-boot, but the device-tree name is relevant as default for
selecting the correct device-tree when booting linux.

Signed-off-by: Daniel Wagenknecht <dwagenk at mailbox.org>
---
 configs/pine_h64-model-b_defconfig | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 configs/pine_h64-model-b_defconfig

diff --git a/configs/pine_h64-model-b_defconfig b/configs/pine_h64-model-b_defconfig
new file mode 100644
index 0000000000..4645ceaa54
--- /dev/null
+++ b/configs/pine_h64-model-b_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64-model-b"
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_MACPWR="PC16"
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB3_VBUS_PIN="PL5"
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_PSCI_RESET is not set
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
-- 
2.31.1



More information about the U-Boot mailing list