[PATCH v1 5/9] gpio: npcm: Add support for Nuvoton NPCM SoCs

Stanley Chu stanley.chuys at gmail.com
Wed Dec 15 03:57:56 CET 2021


Add Nuvoton BMC NPCM7xx/NPCM8xx gpio driver

Signed-off-by: Stanley Chu <yschu at nuvoton.com>
---
 drivers/gpio/Kconfig     |   7 +++
 drivers/gpio/Makefile    |   1 +
 drivers/gpio/npcm_gpio.c | 133 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 141 insertions(+)
 create mode 100644 drivers/gpio/npcm_gpio.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 40abc33772..2aed8fdae3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -523,4 +523,11 @@ config NOMADIK_GPIO
 	  into a number of banks each with 32 GPIOs. The GPIOs for a device are
 	  defined in the device tree with one node for each bank.
 
+config NPCM_GPIO
+	bool "NuvoTon NPCM GPIO driver"
+	depends on DM_GPIO
+	help
+	  Support GPIO controllers on NuvoTon NPCM SoCs.
+	  It contains eight GPIO modules with total 256 pins.
+
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 3c851b38c7..d0206580c4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_NX_GPIO)		+= nx_gpio.o
 obj-$(CONFIG_SIFIVE_GPIO)	+= sifive-gpio.o
 obj-$(CONFIG_NOMADIK_GPIO)	+= nmk_gpio.o
 obj-$(CONFIG_MAX7320_GPIO)	+= max7320_gpio.o
+obj-$(CONFIG_NPCM_GPIO)      += npcm_gpio.o
diff --git a/drivers/gpio/npcm_gpio.c b/drivers/gpio/npcm_gpio.c
new file mode 100644
index 0000000000..703d2e4815
--- /dev/null
+++ b/drivers/gpio/npcm_gpio.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Nuvoton Technology.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/gpio.h>
+#include <dm/device.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#define NPCM_GPIO_PORTS_PER_BANK    32
+
+#define NPCM_GPIO_REG_DIN		0x04	/* RO - Data In */
+#define NPCM_GPIO_REG_DOUT		0x0C	/* RW - Data Out */
+#define NPCM_GPIO_REG_IEM		0x58	/* RW - Input Enable Mask */
+#define NPCM_GPIO_REG_OE		0x10	/* RW - Output Enable */
+#define NPCM_GPIO_REG_OES		0x70	/* WO - Output Enable Register Set */
+#define NPCM_GPIO_REG_OEC		0x74	/* WO - Output Enable Register Clear */
+
+struct npcm_gpio_priv {
+	void __iomem *base;
+};
+
+static void npcm_gpio_offset_write(struct udevice *dev, unsigned int offset,
+				   unsigned int reg, int value)
+{
+	struct npcm_gpio_priv *priv = dev_get_priv(dev);
+	u32 tmp;
+
+	tmp = readl(priv->base + reg);
+
+	if (value)
+		tmp |= BIT(offset);
+	else
+		tmp &= ~BIT(offset);
+
+	writel(tmp, priv->base + reg);
+}
+
+static int npcm_gpio_offset_read(struct udevice *dev, unsigned int offset,
+				 unsigned int reg)
+{
+	struct npcm_gpio_priv *priv = dev_get_priv(dev);
+
+	return !!(readl(priv->base + reg) & BIT(offset));
+}
+
+static int npcm_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_OEC, 1);
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_IEM, 1);
+
+	return 0;
+}
+
+static int npcm_gpio_direction_output(struct udevice *dev, unsigned int offset,
+				      int value)
+{
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_IEM, 0);
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_OES, 1);
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_DOUT, value);
+
+	return 0;
+}
+
+static int npcm_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+	if (npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_IEM))
+		return npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_DIN);
+
+	if (npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_OE))
+		return npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_DOUT);
+
+	return -EINVAL;
+}
+
+static int npcm_gpio_set_value(struct udevice *dev, unsigned int offset,
+			       int value)
+{
+	npcm_gpio_offset_write(dev, offset, NPCM_GPIO_REG_DOUT, value);
+
+	return 0;
+}
+
+static int npcm_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+	if (npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_IEM))
+		return GPIOF_INPUT;
+
+	if (npcm_gpio_offset_read(dev, offset, NPCM_GPIO_REG_OE))
+		return GPIOF_OUTPUT;
+
+	return GPIOF_FUNC;
+}
+
+static const struct dm_gpio_ops npcm_gpio_ops = {
+	.direction_input	= npcm_gpio_direction_input,
+	.direction_output	= npcm_gpio_direction_output,
+	.get_value		= npcm_gpio_get_value,
+	.set_value		= npcm_gpio_set_value,
+	.get_function		= npcm_gpio_get_function,
+};
+
+static int npcm_gpio_probe(struct udevice *dev)
+{
+	struct npcm_gpio_priv *priv = dev_get_priv(dev);
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	priv->base = dev_read_addr_ptr(dev);
+	uc_priv->gpio_count = NPCM_GPIO_PORTS_PER_BANK;
+	uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name");
+
+	return 0;
+}
+
+static const struct udevice_id npcm_gpio_match[] = {
+	{ .compatible = "nuvoton,npcm845-gpio" },
+	{ .compatible = "nuvoton,npcm750-gpio" },
+	{ }
+};
+
+U_BOOT_DRIVER(npcm_gpio) = {
+	.name	= "npcm_gpio",
+	.id	= UCLASS_GPIO,
+	.of_match = npcm_gpio_match,
+	.probe	= npcm_gpio_probe,
+	.priv_auto = sizeof(struct npcm_gpio_priv),
+	.ops	= &npcm_gpio_ops,
+};
-- 
2.17.1



More information about the U-Boot mailing list