[PATCH 2/3] arch: imx8m: imx-regs.h add the USB regs

[Angus Ainslie]

Hi Fabio,

On 2021-12-17 08:28, Fabio Estevam wrote:
> Hi Angus,
> 
> On Fri, Dec 17, 2021 at 12:21 PM Angus Ainslie <angus at akkea.ca> wrote:
>> 
>> Add the USB regs for SDP mode
>> 
>> Signed-off-by: Angus Ainslie <angus at akkea.ca>
>> ---
>>  arch/arm/include/asm/arch-imx8m/imx-regs.h | 5 +++++
>>  1 file changed, 5 insertions(+)
>> 
>> diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h 
>> b/arch/arm/include/asm/arch-imx8m/imx-regs.h
>> index 8cb499d3a3..bd474f88a6 100644
>> --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
>> +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
>> @@ -103,6 +103,11 @@
>>         IMX_CSPI2_BASE, \
>>         IMX_CSPI3_BASE
>> 
>> +#define USB1_BASE_ADDR         0x38100000
>> +#define USB2_BASE_ADDR         0x38200000
>> +#define USB1_PHY_BASE_ADDR     0x381F0000
>> +#define USB2_PHY_BASE_ADDR     0x382F0000
> 
> Some time ago I sent a similar patch and the feedback from Marek was 
> that these
> base addresses should be retrieved from the devicetree instead.

I had problems getting the dwc3 to initialize properly when using the 
device model in the SPL. I'm currently just using this in the SPL and 
the device model in u-boot.

I'll take another shot at initializing the dwc3 in the SPL with the DM.

Thanks
Angus