[PATCH 4/8] arm: kirkwood: Pogoplug-V4 : Add board include configs file

[Tony Dinh]

Add include configs file for Pogoplug V4 board

Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---

 include/configs/pogo_v4.h | 94 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
 create mode 100644 include/configs/pogo_v4.h

diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
new file mode 100644
index 0000000000..b449986e8c
--- /dev/null
+++ b/include/configs/pogo_v4.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014-2021 Tony Dinh <mibodhi at gmail.com>
+ *
+ * Based on
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy at gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ */
+
+#ifndef _CONFIG_POGO_V4_H
+#define _CONFIG_POGO_V4_H
+
+/*
+ * Machine type definition and ID
+ */
+#define MACH_TYPE_POGO_V4		3960
+#define CONFIG_MACH_TYPE		MACH_TYPE_POGO_V4
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131		/* #define CPU Core subversion */
+#define CONFIG_KW88F6192		/* SOC Name */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+	"setenv bootargs $(bootargs_console); " \
+	"run bootcmd_usb; " \
+	"bootm 0x00800000 0x01100000 0x2c00000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"dtb_file=/boot/dts/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"\
+	"mtdids=nand0=orion_nand\0"\
+	"bootargs_console=console=ttyS0,115200\0" \
+	"bootcmd_usb=usb start; load usb 0:1 0x00800000 /boot/uImage; " \
+	"load usb 0:1 0x01100000 /boot/uInitrd; " \
+	"load usb 0:1 0x2c00000 $dtb_file\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEATURE_COMMAND_EDITING	/* for netconsole */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR	0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#ifdef CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_LZO
+#endif /* CONFIG_CMD_JFFS2 */
+
+/*
+ *  SATA Driver configuration
+ */
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#endif /* CONFIG_SATA */
+
+/*
+ * Support large disk for SATA and USB
+ */
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
+
+/*
+ * Kirkwood GPIO
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+#endif /* _CONFIG_POGO_V4_H */
-- 
2.20.1