[RFC v2 05/20] mmc: call device_probe() after scanning

Heinrich Schuchardt xypron.glpk at gmx.de
Sat Dec 18 11:03:27 CET 2021


On 12/18/21 10:48, Heinrich Schuchardt wrote:
> On 12/10/21 07:49, AKASHI Takahiro wrote:
>> Every time a mmc bus/port is scanned and a new device is detected,
>> we want to call device_probe() as it will give us a chance to run
>> additional post-processings for some purposes.
>>
>> In particular, support for creating partitions on a device will be added.
>>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>

Cc: Jaehoon Chung <jh80.chung at samsung.com>, Peng Fan <peng.fan at nxp.com>

Please, use scripts/get_maintainers.pl to identify whom to send patches.

>> ---
>>   drivers/mmc/mmc-uclass.c | 13 +++++++++++++
>>   1 file changed, 13 insertions(+)
>>
>> diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
>> index 3ee92d03ca23..6c907b65fde7 100644
>> --- a/drivers/mmc/mmc-uclass.c
>> +++ b/drivers/mmc/mmc-uclass.c
>> @@ -418,6 +418,7 @@ int mmc_bind(struct udevice *dev, struct mmc *mmc,
>> const struct mmc_config *cfg)
>>       bdesc->part_type = cfg->part_type;
>>       mmc->dev = dev;
>>       mmc->user_speed_mode = MMC_MODES_END;
>> +

Please avoid unrelated changes.

>>       return 0;
>>   }
>>
>> @@ -467,6 +468,18 @@ static int mmc_blk_probe(struct udevice *dev)
>>           return ret;
>>       }
>>
>> +    ret = device_probe(dev);
>> +    if (ret) {
>> +        debug("Can't probe\n");
>> +
>> +        if (IS_ENABLED(CONFIG_MMC_UHS_SUPPORT) ||
>> +            IS_ENABLED(CONFIG_MMC_HS200_SUPPORT) ||
>> +            IS_ENABLED(CONFIG_MMC_HS400_SUPPORT))
>
> Not even sandbox_defconfig builds with your patch:
>
> drivers/mmc/mmc-uclass.c: In function ‘mmc_blk_probe’:
> drivers/mmc/mmc-uclass.c:478:25: warning: implicit declaration of
> function ‘mmc_deinit’; did you mean ‘mmc_reinit’?
> [-Wimplicit-function-declaration]
>    478 |                         mmc_deinit(mmc);
>        |                         ^~~~~~~~~~
>        |                         mmc_reinit
>
> Please, have a look at include/mmc.h:
>
> 790 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
> 791     CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
> 792     CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
> 793 int mmc_deinit(struct mmc *mmc);
> 794 #endif
>
> mmc_deinit() may not be defined.
>
> We should fix include/mmc.h first.

See
[PATCH 1/1] mmc: unconditionally define mmc_deinit()
https://lists.denx.de/pipermail/u-boot/2021-December/469919.html

Best regards

Heinrich

>> +            mmc_deinit(mmc);
>> +
>> +        return ret;
>> +    }
>> +
>>       return 0;
>>   }
>>
>



More information about the U-Boot mailing list