[PATCH 7/9] arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() function

[Stefan Roese]

On 11/18/21 09:19, Stefan Roese wrote:
> This function is not referenced in mainline U-Boot. Let's remove now.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>

Applied to u-boot-marvell/next

Thanks,
Stefan

> ---
>   drivers/ddr/marvell/axp/ddr3_hw_training.h |  1 -
>   drivers/ddr/marvell/axp/ddr3_init.c        | 24 ----------------------
>   drivers/ddr/marvell/axp/ddr3_init.h        |  1 -
>   3 files changed, 26 deletions(-)
> 
> diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h
> index 30daaa9831b9..fcdef792c76a 100644
> --- a/drivers/ddr/marvell/axp/ddr3_hw_training.h
> +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h
> @@ -373,7 +373,6 @@ int ddr3_load_dqs_patterns(MV_DRAM_INFO *dram_info);
>   
>   void ddr3_static_training_init(void);
>   
> -u8 ddr3_get_eprom_fabric(void);
>   void ddr3_set_performance_params(MV_DRAM_INFO *dram_info);
>   int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len);
>   void ddr3_save_training(MV_DRAM_INFO *dram_info);
> diff --git a/drivers/ddr/marvell/axp/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c
> index 607f3e12c3ae..c5aa1ac18f51 100644
> --- a/drivers/ddr/marvell/axp/ddr3_init.c
> +++ b/drivers/ddr/marvell/axp/ddr3_init.c
> @@ -943,30 +943,6 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type)
>   	return 0;
>   }
>   
> -#if defined(DB_88F78X60_REV2)
> -/*
> - * Name:     ddr3_get_eprom_fabric - Get Fabric configuration from EPROM
> - * Desc:
> - * Args:     twsi Address
> - * Notes:    Only Available for ArmadaXP DB Rev2 boards
> - * Returns:  None.
> - */
> -u8 ddr3_get_eprom_fabric(void)
> -{
> -#ifdef AUTO_DETECTION_SUPPORT
> -	u8 data = 0;
> -	int ret;
> -
> -	ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1);
> -	if (!ret)
> -		return data & 0x1F;
> -#endif
> -
> -	return 0;
> -}
> -
> -#endif
> -
>   /*
>    * Name:     ddr3_cl_to_valid_cl - this return register matching CL value
>    * Desc:
> diff --git a/drivers/ddr/marvell/axp/ddr3_init.h b/drivers/ddr/marvell/axp/ddr3_init.h
> index 569a14b7184f..9a21886ac3e7 100644
> --- a/drivers/ddr/marvell/axp/ddr3_init.h
> +++ b/drivers/ddr/marvell/axp/ddr3_init.h
> @@ -98,7 +98,6 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width,
>   
>   void ddr3_print_version(void);
>   void fix_pll_val(u8 target_fab);
> -u8 ddr3_get_eprom_fabric(void);
>   u32 ddr3_get_fab_opt(void);
>   u32 ddr3_get_cpu_freq(void);
>   u32 ddr3_get_vco_freq(void);
> 

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de