[PATCH 2/8] arm: kirkwood: Pogoplug V4 : Add board defconfig file

[Tony Dinh]

Hi Pali,

On Sat, Dec 18, 2021 at 5:17 AM Pali Rohár <pali at kernel.org> wrote:
>
> On Friday 17 December 2021 20:23:28 Tony Dinh wrote:
> > Add board defconfig file for Pogoplug V4 board
> >
> > Signed-off-by: Tony Dinh <mibodhi at gmail.com>
> > ---
> >
> >  configs/pogo_v4_defconfig | 97 +++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 97 insertions(+)
> >  create mode 100644 configs/pogo_v4_defconfig
> >
> > diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
> > new file mode 100644
> > index 0000000000..b183c9c46f
> > --- /dev/null
> > +++ b/configs/pogo_v4_defconfig
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +#
> > +# (C) Copyright 2017-2021 Tony Dinh <mibodhi at gmail.com>
> > +#
> > +CONFIG_ARM=y
> > +CONFIG_SKIP_LOWLEVEL_INIT=y
> > +CONFIG_SYS_DCACHE_OFF=y
> > +CONFIG_ARCH_CPU_INIT=y
> > +CONFIG_SYS_THUMB_BUILD=y
> > +CONFIG_ARCH_KIRKWOOD=y
> > +CONFIG_SYS_TEXT_BASE=0x600000
> > +CONFIG_TARGET_POGO_V4=y
> > +CONFIG_ENV_SIZE=0x20000
> > +CONFIG_ENV_OFFSET=0xC0000
> > +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug_v4"
> > +CONFIG_BOOTDELAY=10
> > +CONFIG_BOOTSTAGE=y
> > +CONFIG_SHOW_BOOT_PROGRESS=y
> > +CONFIG_USE_PREBOOT=y
> > +CONFIG_HUSH_PARSER=y
> > +CONFIG_SYS_PROMPT="Pogo_V4> "
> > +CONFIG_IDENT_STRING="\nPogoplug V4"
> > +CONFIG_SYS_LOAD_ADDR=0x800000
> > +CONFIG_VERSION_VARIABLE=y
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_SETEXPR=y
> > +CONFIG_CMD_NAND=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_DHCP=y
> > +CONFIG_CMD_MII=y
> > +CONFIG_CMD_PING=y
> > +CONFIG_CMD_EXT2=y
> > +CONFIG_CMD_EXT4=y
> > +CONFIG_CMD_FAT=y
> > +CONFIG_CMD_JFFS2=y
> > +CONFIG_CMD_FS_GENERIC=y
> > +CONFIG_CMD_MTDPARTS=y
> > +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
> > +CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
> > +CONFIG_CMD_UBI=y
> > +CONFIG_ISO_PARTITION=y
> > +CONFIG_EFI_PARTITION=y
> > +CONFIG_PARTITION_UUIDS=y
> > +CONFIG_PARTITION_TYPE_GUID=y
> > +CONFIG_ENV_OVERWRITE=y
> > +CONFIG_ENV_IS_IN_NAND=y
> > +CONFIG_SYS_NS16550=y
> > +CONFIG_USB=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_OF_LIBFDT=y
> > +CONFIG_CMD_FDT=y
> > +CONFIG_CMD_BOOTZ=y
> > +CONFIG_NETCONSOLE=y
> > +CONFIG_MTD=y
> > +CONFIG_MTD_RAW_NAND=y
> > +CONFIG_CMD_MTD=y
> > +CONFIG_MTD_PARTITIONS=y
> > +CONFIG_MTD_DEVICE=y
> > +CONFIG_NET=y
> > +CONFIG_NETDEVICES=y
> > +CONFIG_MVGBE=y
> > +CONFIG_MII=y
> > +CONFIG_DM=y
> > +CONFIG_DM_USB=y
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_DM_ETH=y
> > +CONFIG_NET_RANDOM_ETHADDR=y
> > +CONFIG_BLK=y
> > +CONFIG_CMD_SATA=y
> > +CONFIG_SATA_MV=y
> > +CONFIG_DM_MMC=y
> > +CONFIG_MVEBU_MMC=y
> > +CONFIG_CMD_PCI=y
> > +CONFIG_PCI=y
> > +CONFIG_PCI_MVEBU=y
> > +CONFIG_PCI_PNP=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_PCI=y
> > +CONFIG_BOARD_LATE_INIT=y
> > +#
> > +# RTC emulation
> > +#
> > +CONFIG_CMD_DATE=y
> > +CONFIG_PROT_UDP=y
> > +CONFIG_CMD_SNTP=y
> > +CONFIG_CMD_DNS=y
> > +CONFIG_DM_RTC=y
> > +CONFIG_RTC_EMULATION=y
> > +#
> > +# Turn off unused capabilities to save space
> > +#
> > +# CONFIG_BOOTM_PLAN9 is not set
> > +# CONFIG_BOOTM_RTEMS is not set
> > +# CONFIG_BOOTM_VXWORKS is not set
> > +# CONFIG_MMC_HW_PARTITIONING is not set
> > --
> > 2.20.1
> >
>
> Hello! Please regenerate this defconfig file to its canonical form. You
> can do it by commands:
>
>   make pogo_v4_defconfig
>   make savedefconfig
>   mv defconfig configs/pogo_v4_defconfig

Yes, it's a bit harder to read, but it should be done.

Thanks,
Tony