[RFC PATCH v2 7/8] FWU: Add support for FWU Multi Bank Update feature

Tom Rini trini at konsulko.com
Mon Dec 20 17:36:19 CET 2021


On Mon, Dec 20, 2021 at 10:13:35PM +0900, Masami Hiramatsu wrote:
> Hi Sughosh,
> 
> 2021年12月20日(月) 18:48 Sughosh Ganu <sughosh.ganu at linaro.org>:
> >
> >
> > On Mon, 20 Dec 2021 at 11:44, AKASHI Takahiro <takahiro.akashi at linaro.org> wrote:
> >>
> >> On Sun, Dec 19, 2021 at 12:36:04PM +0530, Sughosh Ganu wrote:
> >> > The FWU Multi Bank Update feature supports updation of firmware images
> >> > to one of multiple sets(also called banks) of images. The firmware
> >> > images are clubbed together in banks, with the system booting images
> >> > from the active bank. Information on the images such as which bank
> >> > they belong to is stored as part of the metadata structure, which is
> >> > stored on the same storage media as the firmware images on a dedicated
> >> > partition.
> >> >
> >> > At the time of update, the metadata is read to identify the bank to
> >> > which the images need to be flashed(update bank). On a successful
> >> > update, the metadata is modified to set the updated bank as active
> >> > bank to subsequently boot from.
> >> >
> >> > Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> >> > ---
> >> > Changes since V1:
> >> > * Call function fwu_update_checks_pass to check if the
> >> >   update can be initiated
> >> > * Do not allow firmware update from efi_init_obj_list as the
> >> >   fwu boot-time checks need to be run
> >> >
> >> >  include/fwu.h                |  18 +++-
> >> >  lib/Kconfig                  |  32 ++++++
> >> >  lib/Makefile                 |   1 +
> >> >  lib/efi_loader/efi_capsule.c | 198 ++++++++++++++++++++++++++++++++++-
> >> >  lib/efi_loader/efi_setup.c   |   3 +-
> >> >  lib/fwu_updates/Makefile     |  11 ++
> >> >  lib/fwu_updates/fwu.c        |  27 +++++
> >> >  7 files changed, 284 insertions(+), 6 deletions(-)
> >> >  create mode 100644 lib/fwu_updates/Makefile
> >> >
> >> > diff --git a/include/fwu.h b/include/fwu.h
> >> > index 2d2e674d6a..bf50fe9277 100644
> >> > --- a/include/fwu.h
> >> > +++ b/include/fwu.h
> >> > @@ -10,14 +10,28 @@
> >> >
> >> >  #include <linux/types.h>
> >> >
> >> > -#define FWU_MDATA_VERSION    0x1
> >> > +#define FWU_MDATA_GUID \
> >> > +     EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> >> > +              0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
> >> > +
> >> > +#define FWU_OS_REQUEST_FW_REVERT_GUID \
> >> > +     EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
> >> > +              0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
> >> > +
> >> > +#define FWU_OS_REQUEST_FW_ACCEPT_GUID \
> >> > +     EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
> >> > +              0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
> >> >
> >> >  #define FWU_MDATA_GUID \
> >> >       EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> >> >                0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
> >> >
> >> > -int fwu_boottime_checks(void);
> >> > +#define FWU_MDATA_VERSION    0x1
> >> > +#define FWU_IMAGE_ACCEPTED   0x1
> >> > +
> >> >  u8 fwu_update_checks_pass(void);
> >> > +int fwu_boottime_checks(void);
> >> > +int fwu_trial_state_ctr_start(void);
> >> >
> >> >  int fwu_get_active_index(u32 *active_idx);
> >> >  int fwu_update_active_index(u32 active_idx);
> >> > diff --git a/lib/Kconfig b/lib/Kconfig
> >> > index 807a4c6ade..7cb306317c 100644
> >> > --- a/lib/Kconfig
> >> > +++ b/lib/Kconfig
> >> > @@ -835,3 +835,35 @@ config PHANDLE_CHECK_SEQ
> >> >         When there are multiple device tree nodes with same name,
> >> >            enable this config option to distinguish them using
> >> >         phandles in fdtdec_get_alias_seq() function.
> >> > +
> >> > +config FWU_MULTI_BANK_UPDATE
> >> > +     bool "Enable FWU Multi Bank Update Feature"
> >> > +     depends on EFI_HAVE_CAPSULE_SUPPORT
> >> > +     select PARTITION_TYPE_GUID
> >> > +     select EFI_SETUP_EARLY
> >> > +     help
> >> > +       Feature for updating firmware images on platforms having
> >> > +       multiple banks(copies) of the firmware images. One of the
> >> > +       bank is selected for updating all the firmware components
> >> > +
> >> > +config FWU_NUM_BANKS
> >> > +     int "Number of Banks defined by the platform"
> >> > +     depends on FWU_MULTI_BANK_UPDATE
> >> > +     help
> >> > +       Define the number of banks of firmware images on a platform
> >> > +
> >> > +config FWU_NUM_IMAGES_PER_BANK
> >> > +     int "Number of firmware images per bank"
> >> > +     depends on FWU_MULTI_BANK_UPDATE
> >> > +     help
> >> > +       Define the number of firmware images per bank. This value
> >> > +       should be the same for all the banks.
> >> > +
> >> > +config FWU_TRIAL_STATE_CNT
> >> > +     int "Number of times system boots in Trial State"
> >> > +     depends on FWU_MULTI_BANK_UPDATE
> >> > +     default 3
> >> > +     help
> >> > +       With FWU Multi Bank Update feature enabled, number of times
> >> > +       the platform is allowed to boot in Trial State after an
> >> > +       update.
> >> > diff --git a/lib/Makefile b/lib/Makefile
> >> > index 5ddbc77ed6..bc5c1e22fc 100644
> >> > --- a/lib/Makefile
> >> > +++ b/lib/Makefile
> >> > @@ -9,6 +9,7 @@ obj-$(CONFIG_EFI) += efi/
> >> >  obj-$(CONFIG_EFI_LOADER) += efi_driver/
> >> >  obj-$(CONFIG_EFI_LOADER) += efi_loader/
> >> >  obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += efi_selftest/
> >> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_updates/
> >> >  obj-$(CONFIG_LZMA) += lzma/
> >> >  obj-$(CONFIG_BZIP2) += bzip2/
> >> >  obj-$(CONFIG_TIZEN) += tizen/
> >> > diff --git a/lib/efi_loader/efi_capsule.c b/lib/efi_loader/efi_capsule.c
> >> > index 8301eed631..6dfe56bb0f 100644
> >> > --- a/lib/efi_loader/efi_capsule.c
> >> > +++ b/lib/efi_loader/efi_capsule.c
> >> > @@ -14,6 +14,7 @@
> >> >  #include <env.h>
> >> >  #include <fdtdec.h>
> >> >  #include <fs.h>
> >> > +#include <fwu.h>
> >> >  #include <malloc.h>
> >> >  #include <mapmem.h>
> >> >  #include <sort.h>
> >> > @@ -30,6 +31,13 @@ static const efi_guid_t efi_guid_firmware_management_capsule_id =
> >> >               EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID;
> >> >  const efi_guid_t efi_guid_firmware_management_protocol =
> >> >               EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID;
> >> > +const efi_guid_t fwu_guid_os_request_fw_revert =
> >> > +             FWU_OS_REQUEST_FW_REVERT_GUID;
> >> > +const efi_guid_t fwu_guid_os_request_fw_accept =
> >> > +             FWU_OS_REQUEST_FW_ACCEPT_GUID;
> >> > +
> >> > +__maybe_unused static u32 update_index;
> >> > +__maybe_unused static bool capsule_update;
> >> >
> >> >  #ifdef CONFIG_EFI_CAPSULE_ON_DISK
> >> >  /* for file system access */
> >> > @@ -403,10 +411,13 @@ static efi_status_t efi_capsule_update_firmware(
> >> >       void *image_binary, *vendor_code;
> >> >       efi_handle_t *handles;
> >> >       efi_uintn_t no_handles;
> >> > -     int item;
> >> > +     int item, alt_no;
> >> >       struct efi_firmware_management_protocol *fmp;
> >> >       u16 *abort_reason;
> >> > +     efi_guid_t image_type_id;
> >> >       efi_status_t ret = EFI_SUCCESS;
> >> > +     int status;
> >> > +     u8 image_index;
> >> >
> >> >       /* sanity check */
> >> >       if (capsule_data->header_size < sizeof(*capsule) ||
> >> > @@ -481,8 +492,36 @@ static efi_status_t efi_capsule_update_firmware(
> >> >                               goto out;
> >> >               }
> >> >
> >> > +             if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +                     /*
> >> > +                      * Based on the value of update_image_type_id,
> >> > +                      * derive the alt number value. This will be
> >> > +                      * passed as update_image_index to the
> >> > +                      * set_image function.
> >> > +                      */
> >> > +                     image_type_id = image->update_image_type_id;
> >> > +                     status = fwu_get_image_alt_num(image_type_id,
> >> > +                                                    update_index,
> >> > +                                                    &alt_no);
> >> > +                     if (status < 0) {
> >> > +                             log_err("Unable to get the alt no for the image type %pUl\n",
> >> > +                                     &image_type_id);
> >> > +                             if (status == -ENODEV || status == -EIO)
> >> > +                                     ret = EFI_DEVICE_ERROR;
> >> > +                             else if (status == -ENOMEM)
> >> > +                                     ret = EFI_OUT_OF_RESOURCES;
> >> > +                             else if (status == -ERANGE || status == -EINVAL)
> >> > +                                     ret = EFI_INVALID_PARAMETER;
> >> > +                             goto out;
> >> > +                     }
> >> > +                     log_debug("alt_no %u for Image Type Id %pUl\n",
> >> > +                               alt_no, &image_type_id);
> >> > +                     image_index = alt_no + 1;
> >> > +             } else {
> >> > +                     image_index = image->update_image_index;
> >> > +             }
> >> >               abort_reason = NULL;
> >> > -             ret = EFI_CALL(fmp->set_image(fmp, image->update_image_index,
> >> > +             ret = EFI_CALL(fmp->set_image(fmp, image_index,
> >> >                                             image_binary,
> >> >                                             image_binary_size,
> >> >                                             vendor_code, NULL,
> >> > @@ -493,6 +532,24 @@ static efi_status_t efi_capsule_update_firmware(
> >> >                       efi_free_pool(abort_reason);
> >> >                       goto out;
> >> >               }
> >> > +
> >> > +             if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +                     status = fwu_clear_accept_image(&image_type_id,
> >> > +                                                     update_index);
> >> > +                     if (status < 0) {
> >> > +                             log_err("Unable to clear the accept bit for the image %pUl\n",
> >> > +                                     &image_type_id);
> >> > +                             if (status == -ENODEV || status == -EIO)
> >> > +                                     ret = EFI_DEVICE_ERROR;
> >> > +                             else if (status == -ENOMEM)
> >> > +                                     ret = EFI_OUT_OF_RESOURCES;
> >> > +                             else if (status == -ERANGE || status == -EINVAL)
> >> > +                                     ret = EFI_INVALID_PARAMETER;
> >> > +                             goto out;
> >> > +                     }
> >> > +                     log_debug("Cleared out accepted bit for Image %pUl\n", &image_type_id);
> >> > +             }
> >> > +
> >> >       }
> >> >
> >> >  out:
> >> > @@ -527,6 +584,9 @@ efi_status_t EFIAPI efi_update_capsule(
> >> >               u64 scatter_gather_list)
> >> >  {
> >> >       struct efi_capsule_header *capsule;
> >> > +     efi_guid_t *image_guid;
> >> > +     u32 active_idx;
> >> > +     int status;
> >> >       unsigned int i;
> >> >       efi_status_t ret;
> >> >
> >> > @@ -538,6 +598,16 @@ efi_status_t EFIAPI efi_update_capsule(
> >> >               goto out;
> >> >       }
> >> >
> >> > +     if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +             /* Obtain the update_index from the platform */
> >> > +             status = fwu_plat_get_update_index(&update_index);
> >> > +             if (status < 0) {
> >> > +                     log_err("Failed to get the FWU update_index value\n");
> >> > +                     ret = EFI_DEVICE_ERROR;
> >> > +                     goto out;
> >> > +             }
> >> > +     }
> >> > +
> >> >       ret = EFI_SUCCESS;
> >> >       for (i = 0, capsule = *capsule_header_array; i < capsule_count;
> >> >            i++, capsule = *(++capsule_header_array)) {
> >> > @@ -552,7 +622,64 @@ efi_status_t EFIAPI efi_update_capsule(
> >> >                         i, &capsule->capsule_guid);
> >> >               if (!guidcmp(&capsule->capsule_guid,
> >> >                            &efi_guid_firmware_management_capsule_id)) {
> >> > +                     if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +                             if (!fwu_update_checks_pass()) {
> >> > +                                     log_err("FWU checks failed. Cannot start update\n");
> >> > +                                     ret = EFI_INVALID_PARAMETER;
> >> > +                                     goto out;
> >> > +                             }
> >> > +                     }
> >> > +
> >> >                       ret  = efi_capsule_update_firmware(capsule);
> >> > +                     capsule_update = true;
> >> > +             } else if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +                     capsule_update = false;
> >> > +                     if (!guidcmp(&capsule->capsule_guid,
> >> > +                                  &fwu_guid_os_request_fw_revert)) {
> >> > +                             /*
> >> > +                              * One of the previously updated image has
> >> > +                              * failed the OS acceptance test. OS has
> >> > +                              * requested to revert back to the earlier
> >> > +                              * boot index
> >> > +                              */
> >> > +                             status = fwu_revert_boot_index();
> >> > +                             if (status < 0) {
> >> > +                                     log_err("Failed to revert the FWU boot index\n");
> >> > +                                     if (status == -ENODEV ||
> >> > +                                         status == -ERANGE ||
> >> > +                                         status == -EIO)
> >> > +                                             ret = EFI_DEVICE_ERROR;
> >> > +                                     else if (status == -EINVAL)
> >> > +                                             ret = EFI_INVALID_PARAMETER;
> >> > +                                     else if (status == -ENOMEM)
> >> > +                                             ret = EFI_OUT_OF_RESOURCES;
> >> > +                             } else {
> >> > +                                     ret = EFI_SUCCESS;
> >> > +                                     log_err("Reverted the FWU active_index to %u. Recommend rebooting the system\n",
> >> > +                                             active_idx);
> >> > +                             }
> >> > +                     } else if (!guidcmp(&capsule->capsule_guid,
> >> > +                                         &fwu_guid_os_request_fw_accept)) {
> >> > +                             /*
> >> > +                              * Image accepted by the OS. Set the acceptance
> >> > +                              * status for the image.
> >> > +                              */
> >> > +                             image_guid = (void *)(char *)capsule +
> >> > +                                     capsule->header_size;
> >> > +                             status = fwu_accept_image(image_guid);
> >> > +                             if (status < 0) {
> >> > +                                     if (status == -ENODEV ||
> >> > +                                         status == -ERANGE ||
> >> > +                                         status == -EIO)
> >> > +                                             ret = EFI_DEVICE_ERROR;
> >> > +                                     else if (status == -EINVAL)
> >> > +                                             ret = EFI_INVALID_PARAMETER;
> >> > +                                     else if (status == -ENOMEM)
> >> > +                                             ret = EFI_OUT_OF_RESOURCES;
> >> > +                             } else {
> >> > +                                     ret = EFI_SUCCESS;
> >> > +                             }
> >> > +                     }
> >> >               } else {
> >> >                       log_err("Unsupported capsule type: %pUl\n",
> >> >                               &capsule->capsule_guid);
> >> > @@ -563,6 +690,36 @@ efi_status_t EFIAPI efi_update_capsule(
> >> >                       goto out;
> >> >       }
> >> >
> >> > +     /*
> >> > +      * Update the FWU metadata once all the capsules have
> >> > +      * been updated. This is done only for the Runtime
> >> > +      * capsule update service.
> >> > +      * The update_index value now gets written to the
> >> > +      * active_index and the update_index value also
> >> > +      * gets updated.
> >> > +      * For the capsule-on-disk feature, the updation
> >> > +      * of the FWU metadata happens in efi_launch_capsules
> >> > +      */
> >> > +     if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
> >> > +         !IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK)) {
> >> > +             status = fwu_update_active_index(update_index);
> >> > +             if (status < 0) {
> >> > +                     log_err("Failed to update FWU metadata index values\n");
> >> > +                     if (status == -EINVAL || status == -ERANGE)
> >> > +                             ret = EFI_INVALID_PARAMETER;
> >> > +                     else if (status == -ENODEV || status == -EIO)
> >> > +                             ret = EFI_DEVICE_ERROR;
> >> > +                     else if (status == -ENOMEM)
> >> > +                             ret = EFI_OUT_OF_RESOURCES;
> >> > +             } else {
> >> > +                     status = fwu_trial_state_ctr_start();
> >> > +                     if (status < 0)
> >> > +                             ret = EFI_DEVICE_ERROR;
> >> > +                     else
> >> > +                             ret = EFI_SUCCESS;
> >> > +             }
> >> > +     }
> >> > +
> >> >       if (IS_ENABLED(CONFIG_EFI_ESRT)) {
> >> >               /* Rebuild the ESRT to reflect any updated FW images. */
> >> >               ret = efi_esrt_populate();
> >> > @@ -1090,8 +1247,10 @@ efi_status_t efi_launch_capsules(void)
> >> >  {
> >> >       struct efi_capsule_header *capsule = NULL;
> >> >       u16 **files;
> >> > +     int status;
> >> >       unsigned int nfiles, index, i;
> >> >       efi_status_t ret;
> >> > +     bool update_status = true;
> >> >
> >> >       if (check_run_capsules() != EFI_SUCCESS)
> >> >               return EFI_SUCCESS;
> >> > @@ -1119,9 +1278,11 @@ efi_status_t efi_launch_capsules(void)
> >> >               ret = efi_capsule_read_file(files[i], &capsule);
> >> >               if (ret == EFI_SUCCESS) {
> >> >                       ret = EFI_CALL(efi_update_capsule(&capsule, 1, 0));
> >> > -                     if (ret != EFI_SUCCESS)
> >> > +                     if (ret != EFI_SUCCESS) {
> >> >                               log_err("Applying capsule %ls failed\n",
> >> >                                       files[i]);
> >> > +                             update_status = false;
> >> > +                     }
> >> >
> >> >                       /* create CapsuleXXXX */
> >> >                       set_capsule_result(index, capsule, ret);
> >> > @@ -1129,6 +1290,7 @@ efi_status_t efi_launch_capsules(void)
> >> >                       free(capsule);
> >> >               } else {
> >> >                       log_err("Reading capsule %ls failed\n", files[i]);
> >> > +                     update_status = false;
> >> >               }
> >> >               /* delete a capsule either in case of success or failure */
> >> >               ret = efi_capsule_delete_file(files[i]);
> >> > @@ -1136,7 +1298,37 @@ efi_status_t efi_launch_capsules(void)
> >> >                       log_err("Deleting capsule %ls failed\n",
> >> >                               files[i]);
> >> >       }
> >> > +
> >> >       efi_capsule_scan_done();
> >> > +     if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> >> > +             if (update_status == true && capsule_update == true) {
> >> > +                     /*
> >> > +                      * All the capsules have been updated successfully,
> >> > +                      * update the FWU metadata.
> >> > +                      */
> >> > +                     log_debug("Update Complete. Now updating active_index to %u\n",
> >> > +                               update_index);
> >> > +                     status = fwu_update_active_index(update_index);
> >> > +                     if (status < 0) {
> >> > +                             log_err("Failed to update FWU metadata index values\n");
> >> > +                             if (status == -EINVAL || status == -ERANGE)
> >> > +                                     ret = EFI_INVALID_PARAMETER;
> >> > +                             else if (status == -ENODEV || status == -EIO)
> >> > +                                     ret = EFI_DEVICE_ERROR;
> >> > +                             else if (status == -ENOMEM)
> >> > +                                     ret = EFI_OUT_OF_RESOURCES;
> >> > +                     } else {
> >> > +                             log_debug("Successfully updated the active_index\n");
> >> > +                             status = fwu_trial_state_ctr_start();
> >> > +                             if (status < 0)
> >> > +                                     ret = EFI_DEVICE_ERROR;
> >> > +                             else
> >> > +                                     ret = EFI_SUCCESS;
> >> > +                     }
> >> > +             } else if (capsule_update == true && update_status == false) {
> >> > +                     log_err("All capsules were not updated. Not updating FWU metadata\n");
> >> > +             }
> >> > +     }
> >> >
> >> >       for (i = 0; i < nfiles; i++)
> >> >               free(files[i]);
> >> > diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c
> >> > index 1aba71cd96..6601176a2d 100644
> >> > --- a/lib/efi_loader/efi_setup.c
> >> > +++ b/lib/efi_loader/efi_setup.c
> >> > @@ -298,7 +298,8 @@ efi_status_t efi_init_obj_list(void)
> >> >               goto out;
> >> >
> >> >       /* Execute capsules after reboot */
> >> > -     if (IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
> >> > +     if (!IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
> >> > +         IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
> >> >           !IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK_EARLY))
> >> >               ret = efi_launch_capsules();
> >> >  out:
> >> > diff --git a/lib/fwu_updates/Makefile b/lib/fwu_updates/Makefile
> >> > new file mode 100644
> >> > index 0000000000..73099a30cb
> >> > --- /dev/null
> >> > +++ b/lib/fwu_updates/Makefile
> >> > @@ -0,0 +1,11 @@
> >> > +# SPDX-License-Identifier: GPL-2.0+
> >> > +#
> >> > +# Copyright (c) 2021, Linaro Limited
> >> > +#
> >> > +
> >> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_mdata.o
> >> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu.o
> >> > +
> >> > +ifdef CONFIG_EFI_PARTITION
> >> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_mdata_gpt_blk.o
> >> > +endif
> >>
> >> If I understand correctly, any platform may have its own
> >> fwu_mdata_ops. So we should not unconditionally compile in
> >> fwu_mdata_gpt_blk.o even if CONFIG_EFI_PARTITION is enabled.
> >
> >
> > I can put in an additional guard of CONFIG_BLK for building the file. Not sure if there would be a requirement to have a platform specific set of operations for a GPT partitioned block device. Will wait for Masami to explain.
> 
> 
> OK, I'm trying to implement the AB update on the developerbox
> platform, which doesn't have GPT, nor BLK since the firmware will be
> stored on the SPI NOR flash. So I will introduce a new fwu_mdata_sf.c.
> For this purpose, I introduced CONFIG_FWU_MULTI_BANK_UPDATE_SF, which
> depends on CONFIG_FWU_MULTI_BANK_UPDATE and CONFIG_DM_SPI_FLASH. Thus,
> I also recommend you to introduce CONFIG_FWU_MULTI_BANK_UPDATE_GPT_BLK
> and it should depends on CONFIG_BLK and selects CONFIG_EFI_PARTITION.
> 
> BTW, there are some code pieces which can shared with the
> fwu_mdata_gpt_blk.c, for example, comparing primary and seconday
> metadata and calculate the crc32.

Here's my concern / question.  At what level is this abstraction being
used?  I want to be sure that other SoCs, such as say a Rockchip
platform (I have a SystemReady IR certified one on the way) can re-use
this code as well but I'm sure it will need things written to different
offsets within the SPI/eMMC.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20211220/f1b74106/attachment.sig>


More information about the U-Boot mailing list