[RFC PATCH v2 7/8] FWU: Add support for FWU Multi Bank Update feature

Sughosh Ganu sughosh.ganu at linaro.org
Thu Dec 23 11:39:33 CET 2021


hi Masami,

On Thu, 23 Dec 2021 at 06:23, Masami Hiramatsu <masami.hiramatsu at linaro.org>
wrote:

> Hi Sughosh,
>
> Can you move the FWU related configs to lib/fwu_updates/Kconfig ?
> FWU multi bank update is an independent feature, thus I think it is
> better to have its own Kconfig file and the lib/Kconfig only includes
> it.
> (I did it on my development series)
>

Okay, I have moved the FWU config options in a Kconfig file under
lib/fwu_updates/. This gets sourced from lib/Kconfig.

-sughosh


>
> Thank you,
>
> 2021年12月19日(日) 16:07 Sughosh Ganu <sughosh.ganu at linaro.org>:
> >
> > The FWU Multi Bank Update feature supports updation of firmware images
> > to one of multiple sets(also called banks) of images. The firmware
> > images are clubbed together in banks, with the system booting images
> > from the active bank. Information on the images such as which bank
> > they belong to is stored as part of the metadata structure, which is
> > stored on the same storage media as the firmware images on a dedicated
> > partition.
> >
> > At the time of update, the metadata is read to identify the bank to
> > which the images need to be flashed(update bank). On a successful
> > update, the metadata is modified to set the updated bank as active
> > bank to subsequently boot from.
> >
> > Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> > ---
> > Changes since V1:
> > * Call function fwu_update_checks_pass to check if the
> >   update can be initiated
> > * Do not allow firmware update from efi_init_obj_list as the
> >   fwu boot-time checks need to be run
> >
> >  include/fwu.h                |  18 +++-
> >  lib/Kconfig                  |  32 ++++++
> >  lib/Makefile                 |   1 +
> >  lib/efi_loader/efi_capsule.c | 198 ++++++++++++++++++++++++++++++++++-
> >  lib/efi_loader/efi_setup.c   |   3 +-
> >  lib/fwu_updates/Makefile     |  11 ++
> >  lib/fwu_updates/fwu.c        |  27 +++++
> >  7 files changed, 284 insertions(+), 6 deletions(-)
> >  create mode 100644 lib/fwu_updates/Makefile
> >
> > diff --git a/include/fwu.h b/include/fwu.h
> > index 2d2e674d6a..bf50fe9277 100644
> > --- a/include/fwu.h
> > +++ b/include/fwu.h
> > @@ -10,14 +10,28 @@
> >
> >  #include <linux/types.h>
> >
> > -#define FWU_MDATA_VERSION      0x1
> > +#define FWU_MDATA_GUID \
> > +       EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> > +                0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
> > +
> > +#define FWU_OS_REQUEST_FW_REVERT_GUID \
> > +       EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
> > +                0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
> > +
> > +#define FWU_OS_REQUEST_FW_ACCEPT_GUID \
> > +       EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
> > +                0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
> >
> >  #define FWU_MDATA_GUID \
> >         EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> >                  0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
> >
> > -int fwu_boottime_checks(void);
> > +#define FWU_MDATA_VERSION      0x1
> > +#define FWU_IMAGE_ACCEPTED     0x1
> > +
> >  u8 fwu_update_checks_pass(void);
> > +int fwu_boottime_checks(void);
> > +int fwu_trial_state_ctr_start(void);
> >
> >  int fwu_get_active_index(u32 *active_idx);
> >  int fwu_update_active_index(u32 active_idx);
> > diff --git a/lib/Kconfig b/lib/Kconfig
> > index 807a4c6ade..7cb306317c 100644
> > --- a/lib/Kconfig
> > +++ b/lib/Kconfig
> > @@ -835,3 +835,35 @@ config PHANDLE_CHECK_SEQ
> >           When there are multiple device tree nodes with same name,
> >            enable this config option to distinguish them using
> >           phandles in fdtdec_get_alias_seq() function.
> > +
> > +config FWU_MULTI_BANK_UPDATE
> > +       bool "Enable FWU Multi Bank Update Feature"
> > +       depends on EFI_HAVE_CAPSULE_SUPPORT
> > +       select PARTITION_TYPE_GUID
> > +       select EFI_SETUP_EARLY
> > +       help
> > +         Feature for updating firmware images on platforms having
> > +         multiple banks(copies) of the firmware images. One of the
> > +         bank is selected for updating all the firmware components
> > +
> > +config FWU_NUM_BANKS
> > +       int "Number of Banks defined by the platform"
> > +       depends on FWU_MULTI_BANK_UPDATE
> > +       help
> > +         Define the number of banks of firmware images on a platform
> > +
> > +config FWU_NUM_IMAGES_PER_BANK
> > +       int "Number of firmware images per bank"
> > +       depends on FWU_MULTI_BANK_UPDATE
> > +       help
> > +         Define the number of firmware images per bank. This value
> > +         should be the same for all the banks.
> > +
> > +config FWU_TRIAL_STATE_CNT
> > +       int "Number of times system boots in Trial State"
> > +       depends on FWU_MULTI_BANK_UPDATE
> > +       default 3
> > +       help
> > +         With FWU Multi Bank Update feature enabled, number of times
> > +         the platform is allowed to boot in Trial State after an
> > +         update.
> > diff --git a/lib/Makefile b/lib/Makefile
> > index 5ddbc77ed6..bc5c1e22fc 100644
> > --- a/lib/Makefile
> > +++ b/lib/Makefile
> > @@ -9,6 +9,7 @@ obj-$(CONFIG_EFI) += efi/
> >  obj-$(CONFIG_EFI_LOADER) += efi_driver/
> >  obj-$(CONFIG_EFI_LOADER) += efi_loader/
> >  obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += efi_selftest/
> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_updates/
> >  obj-$(CONFIG_LZMA) += lzma/
> >  obj-$(CONFIG_BZIP2) += bzip2/
> >  obj-$(CONFIG_TIZEN) += tizen/
> > diff --git a/lib/efi_loader/efi_capsule.c b/lib/efi_loader/efi_capsule.c
> > index 8301eed631..6dfe56bb0f 100644
> > --- a/lib/efi_loader/efi_capsule.c
> > +++ b/lib/efi_loader/efi_capsule.c
> > @@ -14,6 +14,7 @@
> >  #include <env.h>
> >  #include <fdtdec.h>
> >  #include <fs.h>
> > +#include <fwu.h>
> >  #include <malloc.h>
> >  #include <mapmem.h>
> >  #include <sort.h>
> > @@ -30,6 +31,13 @@ static const efi_guid_t
> efi_guid_firmware_management_capsule_id =
> >                 EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID;
> >  const efi_guid_t efi_guid_firmware_management_protocol =
> >                 EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID;
> > +const efi_guid_t fwu_guid_os_request_fw_revert =
> > +               FWU_OS_REQUEST_FW_REVERT_GUID;
> > +const efi_guid_t fwu_guid_os_request_fw_accept =
> > +               FWU_OS_REQUEST_FW_ACCEPT_GUID;
> > +
> > +__maybe_unused static u32 update_index;
> > +__maybe_unused static bool capsule_update;
> >
> >  #ifdef CONFIG_EFI_CAPSULE_ON_DISK
> >  /* for file system access */
> > @@ -403,10 +411,13 @@ static efi_status_t efi_capsule_update_firmware(
> >         void *image_binary, *vendor_code;
> >         efi_handle_t *handles;
> >         efi_uintn_t no_handles;
> > -       int item;
> > +       int item, alt_no;
> >         struct efi_firmware_management_protocol *fmp;
> >         u16 *abort_reason;
> > +       efi_guid_t image_type_id;
> >         efi_status_t ret = EFI_SUCCESS;
> > +       int status;
> > +       u8 image_index;
> >
> >         /* sanity check */
> >         if (capsule_data->header_size < sizeof(*capsule) ||
> > @@ -481,8 +492,36 @@ static efi_status_t efi_capsule_update_firmware(
> >                                 goto out;
> >                 }
> >
> > +               if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +                       /*
> > +                        * Based on the value of update_image_type_id,
> > +                        * derive the alt number value. This will be
> > +                        * passed as update_image_index to the
> > +                        * set_image function.
> > +                        */
> > +                       image_type_id = image->update_image_type_id;
> > +                       status = fwu_get_image_alt_num(image_type_id,
> > +                                                      update_index,
> > +                                                      &alt_no);
> > +                       if (status < 0) {
> > +                               log_err("Unable to get the alt no for
> the image type %pUl\n",
> > +                                       &image_type_id);
> > +                               if (status == -ENODEV || status == -EIO)
> > +                                       ret = EFI_DEVICE_ERROR;
> > +                               else if (status == -ENOMEM)
> > +                                       ret = EFI_OUT_OF_RESOURCES;
> > +                               else if (status == -ERANGE || status ==
> -EINVAL)
> > +                                       ret = EFI_INVALID_PARAMETER;
> > +                               goto out;
> > +                       }
> > +                       log_debug("alt_no %u for Image Type Id %pUl\n",
> > +                                 alt_no, &image_type_id);
> > +                       image_index = alt_no + 1;
> > +               } else {
> > +                       image_index = image->update_image_index;
> > +               }
> >                 abort_reason = NULL;
> > -               ret = EFI_CALL(fmp->set_image(fmp,
> image->update_image_index,
> > +               ret = EFI_CALL(fmp->set_image(fmp, image_index,
> >                                               image_binary,
> >                                               image_binary_size,
> >                                               vendor_code, NULL,
> > @@ -493,6 +532,24 @@ static efi_status_t efi_capsule_update_firmware(
> >                         efi_free_pool(abort_reason);
> >                         goto out;
> >                 }
> > +
> > +               if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +                       status = fwu_clear_accept_image(&image_type_id,
> > +                                                       update_index);
> > +                       if (status < 0) {
> > +                               log_err("Unable to clear the accept bit
> for the image %pUl\n",
> > +                                       &image_type_id);
> > +                               if (status == -ENODEV || status == -EIO)
> > +                                       ret = EFI_DEVICE_ERROR;
> > +                               else if (status == -ENOMEM)
> > +                                       ret = EFI_OUT_OF_RESOURCES;
> > +                               else if (status == -ERANGE || status ==
> -EINVAL)
> > +                                       ret = EFI_INVALID_PARAMETER;
> > +                               goto out;
> > +                       }
> > +                       log_debug("Cleared out accepted bit for Image
> %pUl\n", &image_type_id);
> > +               }
> > +
> >         }
> >
> >  out:
> > @@ -527,6 +584,9 @@ efi_status_t EFIAPI efi_update_capsule(
> >                 u64 scatter_gather_list)
> >  {
> >         struct efi_capsule_header *capsule;
> > +       efi_guid_t *image_guid;
> > +       u32 active_idx;
> > +       int status;
> >         unsigned int i;
> >         efi_status_t ret;
> >
> > @@ -538,6 +598,16 @@ efi_status_t EFIAPI efi_update_capsule(
> >                 goto out;
> >         }
> >
> > +       if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +               /* Obtain the update_index from the platform */
> > +               status = fwu_plat_get_update_index(&update_index);
> > +               if (status < 0) {
> > +                       log_err("Failed to get the FWU update_index
> value\n");
> > +                       ret = EFI_DEVICE_ERROR;
> > +                       goto out;
> > +               }
> > +       }
> > +
> >         ret = EFI_SUCCESS;
> >         for (i = 0, capsule = *capsule_header_array; i < capsule_count;
> >              i++, capsule = *(++capsule_header_array)) {
> > @@ -552,7 +622,64 @@ efi_status_t EFIAPI efi_update_capsule(
> >                           i, &capsule->capsule_guid);
> >                 if (!guidcmp(&capsule->capsule_guid,
> >                              &efi_guid_firmware_management_capsule_id)) {
> > +                       if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +                               if (!fwu_update_checks_pass()) {
> > +                                       log_err("FWU checks failed.
> Cannot start update\n");
> > +                                       ret = EFI_INVALID_PARAMETER;
> > +                                       goto out;
> > +                               }
> > +                       }
> > +
> >                         ret  = efi_capsule_update_firmware(capsule);
> > +                       capsule_update = true;
> > +               } else if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +                       capsule_update = false;
> > +                       if (!guidcmp(&capsule->capsule_guid,
> > +                                    &fwu_guid_os_request_fw_revert)) {
> > +                               /*
> > +                                * One of the previously updated image
> has
> > +                                * failed the OS acceptance test. OS has
> > +                                * requested to revert back to the
> earlier
> > +                                * boot index
> > +                                */
> > +                               status = fwu_revert_boot_index();
> > +                               if (status < 0) {
> > +                                       log_err("Failed to revert the
> FWU boot index\n");
> > +                                       if (status == -ENODEV ||
> > +                                           status == -ERANGE ||
> > +                                           status == -EIO)
> > +                                               ret = EFI_DEVICE_ERROR;
> > +                                       else if (status == -EINVAL)
> > +                                               ret =
> EFI_INVALID_PARAMETER;
> > +                                       else if (status == -ENOMEM)
> > +                                               ret =
> EFI_OUT_OF_RESOURCES;
> > +                               } else {
> > +                                       ret = EFI_SUCCESS;
> > +                                       log_err("Reverted the FWU
> active_index to %u. Recommend rebooting the system\n",
> > +                                               active_idx);
> > +                               }
> > +                       } else if (!guidcmp(&capsule->capsule_guid,
> > +
>  &fwu_guid_os_request_fw_accept)) {
> > +                               /*
> > +                                * Image accepted by the OS. Set the
> acceptance
> > +                                * status for the image.
> > +                                */
> > +                               image_guid = (void *)(char *)capsule +
> > +                                       capsule->header_size;
> > +                               status = fwu_accept_image(image_guid);
> > +                               if (status < 0) {
> > +                                       if (status == -ENODEV ||
> > +                                           status == -ERANGE ||
> > +                                           status == -EIO)
> > +                                               ret = EFI_DEVICE_ERROR;
> > +                                       else if (status == -EINVAL)
> > +                                               ret =
> EFI_INVALID_PARAMETER;
> > +                                       else if (status == -ENOMEM)
> > +                                               ret =
> EFI_OUT_OF_RESOURCES;
> > +                               } else {
> > +                                       ret = EFI_SUCCESS;
> > +                               }
> > +                       }
> >                 } else {
> >                         log_err("Unsupported capsule type: %pUl\n",
> >                                 &capsule->capsule_guid);
> > @@ -563,6 +690,36 @@ efi_status_t EFIAPI efi_update_capsule(
> >                         goto out;
> >         }
> >
> > +       /*
> > +        * Update the FWU metadata once all the capsules have
> > +        * been updated. This is done only for the Runtime
> > +        * capsule update service.
> > +        * The update_index value now gets written to the
> > +        * active_index and the update_index value also
> > +        * gets updated.
> > +        * For the capsule-on-disk feature, the updation
> > +        * of the FWU metadata happens in efi_launch_capsules
> > +        */
> > +       if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
> > +           !IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK)) {
> > +               status = fwu_update_active_index(update_index);
> > +               if (status < 0) {
> > +                       log_err("Failed to update FWU metadata index
> values\n");
> > +                       if (status == -EINVAL || status == -ERANGE)
> > +                               ret = EFI_INVALID_PARAMETER;
> > +                       else if (status == -ENODEV || status == -EIO)
> > +                               ret = EFI_DEVICE_ERROR;
> > +                       else if (status == -ENOMEM)
> > +                               ret = EFI_OUT_OF_RESOURCES;
> > +               } else {
> > +                       status = fwu_trial_state_ctr_start();
> > +                       if (status < 0)
> > +                               ret = EFI_DEVICE_ERROR;
> > +                       else
> > +                               ret = EFI_SUCCESS;
> > +               }
> > +       }
> > +
> >         if (IS_ENABLED(CONFIG_EFI_ESRT)) {
> >                 /* Rebuild the ESRT to reflect any updated FW images. */
> >                 ret = efi_esrt_populate();
> > @@ -1090,8 +1247,10 @@ efi_status_t efi_launch_capsules(void)
> >  {
> >         struct efi_capsule_header *capsule = NULL;
> >         u16 **files;
> > +       int status;
> >         unsigned int nfiles, index, i;
> >         efi_status_t ret;
> > +       bool update_status = true;
> >
> >         if (check_run_capsules() != EFI_SUCCESS)
> >                 return EFI_SUCCESS;
> > @@ -1119,9 +1278,11 @@ efi_status_t efi_launch_capsules(void)
> >                 ret = efi_capsule_read_file(files[i], &capsule);
> >                 if (ret == EFI_SUCCESS) {
> >                         ret = EFI_CALL(efi_update_capsule(&capsule, 1,
> 0));
> > -                       if (ret != EFI_SUCCESS)
> > +                       if (ret != EFI_SUCCESS) {
> >                                 log_err("Applying capsule %ls failed\n",
> >                                         files[i]);
> > +                               update_status = false;
> > +                       }
> >
> >                         /* create CapsuleXXXX */
> >                         set_capsule_result(index, capsule, ret);
> > @@ -1129,6 +1290,7 @@ efi_status_t efi_launch_capsules(void)
> >                         free(capsule);
> >                 } else {
> >                         log_err("Reading capsule %ls failed\n",
> files[i]);
> > +                       update_status = false;
> >                 }
> >                 /* delete a capsule either in case of success or failure
> */
> >                 ret = efi_capsule_delete_file(files[i]);
> > @@ -1136,7 +1298,37 @@ efi_status_t efi_launch_capsules(void)
> >                         log_err("Deleting capsule %ls failed\n",
> >                                 files[i]);
> >         }
> > +
> >         efi_capsule_scan_done();
> > +       if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> > +               if (update_status == true && capsule_update == true) {
> > +                       /*
> > +                        * All the capsules have been updated
> successfully,
> > +                        * update the FWU metadata.
> > +                        */
> > +                       log_debug("Update Complete. Now updating
> active_index to %u\n",
> > +                                 update_index);
> > +                       status = fwu_update_active_index(update_index);
> > +                       if (status < 0) {
> > +                               log_err("Failed to update FWU metadata
> index values\n");
> > +                               if (status == -EINVAL || status ==
> -ERANGE)
> > +                                       ret = EFI_INVALID_PARAMETER;
> > +                               else if (status == -ENODEV || status ==
> -EIO)
> > +                                       ret = EFI_DEVICE_ERROR;
> > +                               else if (status == -ENOMEM)
> > +                                       ret = EFI_OUT_OF_RESOURCES;
> > +                       } else {
> > +                               log_debug("Successfully updated the
> active_index\n");
> > +                               status = fwu_trial_state_ctr_start();
> > +                               if (status < 0)
> > +                                       ret = EFI_DEVICE_ERROR;
> > +                               else
> > +                                       ret = EFI_SUCCESS;
> > +                       }
> > +               } else if (capsule_update == true && update_status ==
> false) {
> > +                       log_err("All capsules were not updated. Not
> updating FWU metadata\n");
> > +               }
> > +       }
> >
> >         for (i = 0; i < nfiles; i++)
> >                 free(files[i]);
> > diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c
> > index 1aba71cd96..6601176a2d 100644
> > --- a/lib/efi_loader/efi_setup.c
> > +++ b/lib/efi_loader/efi_setup.c
> > @@ -298,7 +298,8 @@ efi_status_t efi_init_obj_list(void)
> >                 goto out;
> >
> >         /* Execute capsules after reboot */
> > -       if (IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
> > +       if (!IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
> > +           IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK) &&
> >             !IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK_EARLY))
> >                 ret = efi_launch_capsules();
> >  out:
> > diff --git a/lib/fwu_updates/Makefile b/lib/fwu_updates/Makefile
> > new file mode 100644
> > index 0000000000..73099a30cb
> > --- /dev/null
> > +++ b/lib/fwu_updates/Makefile
> > @@ -0,0 +1,11 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +#
> > +# Copyright (c) 2021, Linaro Limited
> > +#
> > +
> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_mdata.o
> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu.o
> > +
> > +ifdef CONFIG_EFI_PARTITION
> > +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_mdata_gpt_blk.o
> > +endif
> > diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c
> > index e964f9b0b1..bb0e1961be 100644
> > --- a/lib/fwu_updates/fwu.c
> > +++ b/lib/fwu_updates/fwu.c
> > @@ -107,6 +107,33 @@ u8 fwu_update_checks_pass(void)
> >         return !trial_state && boottime_check;
> >  }
> >
> > +int fwu_trial_state_ctr_start(void)
> > +{
> > +       int ret;
> > +       u32 var_attributes;
> > +       efi_status_t status;
> > +       efi_uintn_t var_size;
> > +       u16 trial_state_ctr;
> > +
> > +       var_size = (efi_uintn_t)sizeof(trial_state_ctr);
> > +       var_attributes = EFI_VARIABLE_NON_VOLATILE |
> > +               EFI_VARIABLE_BOOTSERVICE_ACCESS |
> > +               EFI_VARIABLE_RUNTIME_ACCESS;
> > +
> > +       trial_state_ctr = ret = 0;
> > +       status = efi_set_variable_int(L"TrialStateCtr",
> > +                                     &efi_global_variable_guid,
> > +                                     var_attributes,
> > +                                     var_size,
> > +                                     &trial_state_ctr, false);
> > +       if (status != EFI_SUCCESS) {
> > +               log_err("Unable to increment TrialStateCtr variable\n");
> > +               ret = -1;
> > +       }
> > +
> > +       return ret;
> > +}
> > +
> >  int fwu_boottime_checks(void)
> >  {
> >         int ret;
> > --
> > 2.17.1
> >
>
>
> --
> Masami Hiramatsu
>


More information about the U-Boot mailing list