[PATCH] ARM: mach-k3: sysfw-loader: Copy sysfw.itb to OCRAM in OSPI/SPI bootmode

Vignesh Raghavendra vigneshr at ti.com
Thu Dec 23 14:56:03 CET 2021


In case of xSPI bootmode OSPI flash is in DDR mode and needs to be accessed
in multiple of 16bit accesses Hence we cannot parse sysfw.itb FIT image
directly on OSPI flash via MMIO window. So, copy the image to internal
on-chip RAM before parsing the image.

Moreover, board cfg data maybe modified by ROM/TIFS in case of HS platform
and thus cannot reside in OSPI/xSPI and needs to be copied over to
internal OCRAM.

This unblocks OSPI/xSPI boot on HS platforms

Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
Reviewed-by: Dave Gerlach <d-gerlach at ti.com>
Tested-by: Keerthy <j-keerthy at ti.com>
---
 arch/arm/mach-k3/sysfw-loader.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
index 9ce576186c..5e48c36ccd 100644
--- a/arch/arm/mach-k3/sysfw-loader.c
+++ b/arch/arm/mach-k3/sysfw-loader.c
@@ -22,6 +22,7 @@
 #include <dm/uclass-internal.h>
 #include <spi_flash.h>
 
+#include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include "common.h"
 
@@ -335,6 +336,14 @@ static void *k3_sysfw_get_spi_addr(void)
 
 	return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS);
 }
+
+static void k3_sysfw_spi_copy(u32 *dst, u32 *src, size_t len)
+{
+	size_t i;
+
+	for (i = 0; i < len / sizeof(*dst); i++)
+		*dst++ = *src++;
+}
 #endif
 
 void k3_sysfw_loader(bool rom_loaded_sysfw,
@@ -344,6 +353,9 @@ void k3_sysfw_loader(bool rom_loaded_sysfw,
 	struct spl_image_info spl_image = { 0 };
 	struct spl_boot_device bootdev = { 0 };
 	struct ti_sci_handle *ti_sci;
+#if CONFIG_IS_ENABLED(SPI_LOAD)
+	void *sysfw_spi_base;
+#endif
 	int ret = 0;
 
 	if (rom_loaded_sysfw) {
@@ -394,9 +406,11 @@ void k3_sysfw_loader(bool rom_loaded_sysfw,
 #endif
 #if CONFIG_IS_ENABLED(SPI_LOAD)
 	case BOOT_DEVICE_SPI:
-		sysfw_load_address = k3_sysfw_get_spi_addr();
-		if (!sysfw_load_address)
+		sysfw_spi_base = k3_sysfw_get_spi_addr();
+		if (!sysfw_spi_base)
 			ret = -ENODEV;
+		k3_sysfw_spi_copy(sysfw_load_address, sysfw_spi_base,
+				  CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
 		break;
 #endif
 #if CONFIG_IS_ENABLED(YMODEM_SUPPORT)
-- 
2.34.1



More information about the U-Boot mailing list