help on udoo_neo power up on mainline uboot

[Peter Robinson]

On Wed, Dec 29, 2021 at 9:06 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Tommaso,
>
> On Wed, Dec 29, 2021 at 5:51 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> > > U-Boot 2022.01-rc4-00030-gb3f84a939f-dirty (Dec 29 2021 - 21:22:30 +0100)
> > >
> > > CPU:   Freescale i.MX6SX rev1.2 996 MHz (running at 792 MHz)
> > > CPU:   Extended Commercial temperature grade (-20C to 105C) at 30C
> > > Reset cause: POR
> > > Model: UDOO Neo Basic
> > > Board: UDOO Neo UNDEFINED
> >
> > Could you please help to investigate this output? It should not print
> > "UNDEFINED".
>
> Please try this attached patch instead and share the U-Boot logs.

I'll give that a go shortly, that was still on my todo list do debug,
it was detecting it earlier in the boot for memory detection but
failing with a -6 when doing board detection and working later but
hadn't got to the bottom of it yet.