[PATCH 03/17] mmc: sunxi: Replace H6 ifdefs with H6 gen macro
Jernej Skrabec
jernej.skrabec at siol.net
Sun Jan 3 10:26:19 CET 2021
It turns out that several SoCs share same mmc configuration as H6. In
order to lower ifdef clutter replace H6 specific macro with common one.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
arch/arm/include/asm/arch-sunxi/mmc.h | 2 +-
drivers/mmc/sunxi_mmc.c | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index f2deafddd202..340e25b04d2a 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -45,7 +45,7 @@ struct sunxi_mmc {
u32 chda; /* 0x90 */
u32 cbda; /* 0x94 */
u32 res2[26];
-#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
u32 res3[17];
u32 samp_dl;
u32 res4[46];
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 0e03b07ce555..3767a39277c1 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -122,7 +122,7 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T) && priv->mmc_no != 2)
new_mode = false;
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6)
calibrate = true;
#endif
@@ -133,7 +133,7 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
#ifdef CONFIG_MACH_SUN9I
pll = CCM_MMC_CTRL_PLL_PERIPH0;
pll_hz = clock_get_pll4_periph0();
-#elif defined(CONFIG_MACH_SUN50I_H6)
+#elif defined(CONFIG_SUN50I_GEN_H6)
pll = CCM_MMC_CTRL_PLL6X2;
pll_hz = clock_get_pll6() * 2;
#else
@@ -249,7 +249,7 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
writel(rval, &priv->reg->clkcr);
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6)
/* A64 supports calibration of delays on MMC controller and we
* have to set delay of zero before starting calibration.
* Allwinner BSP driver sets a delay only in the case of
@@ -530,7 +530,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I_H6)
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_SUN50I_GEN_H6)
if (sdc_no == 2)
cfg->host_caps = MMC_MODE_8BIT;
#endif
@@ -545,7 +545,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
/* config ahb clock */
debug("init mmc %d clock and io\n", sdc_no);
-#if !defined(CONFIG_MACH_SUN50I_H6)
+#if !defined(CONFIG_SUN50I_GEN_H6)
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
#ifdef CONFIG_SUNXI_GEN_SUN6I
@@ -557,7 +557,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
#endif
-#else /* CONFIG_MACH_SUN50I_H6 */
+#else /* CONFIG_SUN50I_GEN_H6 */
setbits_le32(&ccm->sd_gate_reset, 1 << sdc_no);
/* unassert reset */
setbits_le32(&ccm->sd_gate_reset, 1 << (RESET_SHIFT + sdc_no));
--
2.30.0
More information about the U-Boot
mailing list