[PATCH 08/17] sunxi: introduce support for H616 clocks

[Jernej Skrabec]

H616 has mostly the same clocks as H6 with some small differences. Just
reuse H6 clocks for H616 and handle differences with macros.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 .../include/asm/arch-sunxi/clock_sun50i_h6.h   | 18 +++++++++++++++++-
 arch/arm/mach-sunxi/clock_sun50i_h6.c          | 10 +++++++++-
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index e83e84ab6cab..62abfc4ef6bd 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -230,6 +230,7 @@ struct sunxi_ccm_reg {
 #define CCM_PLL1_CTRL_EN		BIT(31)
 #define CCM_PLL1_LOCK_EN		BIT(29)
 #define CCM_PLL1_LOCK			BIT(28)
+#define CCM_PLL1_OUT_EN			BIT(27)
 #define CCM_PLL1_CLOCK_TIME_2		(2 << 24)
 #define CCM_PLL1_CTRL_P(p)		((p) << 16)
 #define CCM_PLL1_CTRL_N(n)		((n) << 8)
@@ -238,6 +239,7 @@ struct sunxi_ccm_reg {
 #define CCM_PLL5_CTRL_EN		BIT(31)
 #define CCM_PLL5_LOCK_EN		BIT(29)
 #define CCM_PLL5_LOCK			BIT(28)
+#define CCM_PLL5_OUT_EN			BIT(27)
 #define CCM_PLL5_CTRL_N(n)		((n) << 8)
 #define CCM_PLL5_CTRL_DIV1(div1)	((div1) << 0)
 #define CCM_PLL5_CTRL_DIV2(div0)	((div0) << 1)
@@ -252,7 +254,6 @@ struct sunxi_ccm_reg {
 #define CCM_PLL6_CTRL_DIV1_MASK		(0x1 << CCM_PLL6_CTRL_DIV1_SHIFT)
 #define CCM_PLL6_CTRL_DIV2_SHIFT	1
 #define CCM_PLL6_CTRL_DIV2_MASK		(0x1 << CCM_PLL6_CTRL_DIV2_SHIFT)
-#define CCM_PLL6_DEFAULT		0xa0006300
 
 /* cpu_axi bit field*/
 #define CCM_CPU_AXI_MUX_MASK		(0x3 << 24)
@@ -262,6 +263,9 @@ struct sunxi_ccm_reg {
 #define CCM_CPU_AXI_AXI_MASK		0x3
 #define CCM_CPU_AXI_DEFAULT_FACTORS	0x301
 
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_PLL6_DEFAULT		0xa0006300
+
 /* psi_ahb1_ahb2 bit field */
 #define CCM_PSI_AHB1_AHB2_DEFAULT	0x03000102
 
@@ -270,6 +274,18 @@ struct sunxi_ccm_reg {
 
 /* apb1 bit field */
 #define CCM_APB1_DEFAULT		0x03000102
+#elif CONFIG_MACH_SUN50I_H616
+#define CCM_PLL6_DEFAULT		0xa8003100
+
+/* psi_ahb1_ahb2 bit field */
+#define CCM_PSI_AHB1_AHB2_DEFAULT	0x03000002
+
+/* ahb3 bit field */
+#define CCM_AHB3_DEFAULT		0x03000002
+
+/* apb1 bit field */
+#define CCM_APB1_DEFAULT		0x03000102
+#endif
 
 /* apb2 bit field */
 #define APB2_CLK_SRC_OSC24M		(0x0 << 24)
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index 6bd466915c11..a4cc1b53728b 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -68,6 +68,9 @@ void clock_set_pll1(unsigned int clk)
 
 	/* clk = 24*n/p, p is ignored if clock is >288MHz */
 	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
+#ifdef CONFIG_MACH_SUN50I_H616
+	       CCM_PLL1_OUT_EN |
+#endif
 	       CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
 	while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
 
@@ -83,6 +86,11 @@ unsigned int clock_get_pll6(void)
 {
 	struct sunxi_ccm_reg *const ccm =
 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+#ifdef CONFIG_MACH_SUN50I_H6
+	int m = 4;
+#else
+	int m = 2;
+#endif
 
 	uint32_t rval = readl(&ccm->pll6_cfg);
 	int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
@@ -91,7 +99,7 @@ unsigned int clock_get_pll6(void)
 	int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
 			CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
 	/* The register defines PLL6-4X, not plain PLL6 */
-	return 24000000 / 4 * n / div1 / div2;
+	return 24000000 / m * n / div1 / div2;
 }
 
 int clock_twi_onoff(int port, int state)
-- 
2.30.0