[PATCH 10/17] sunxi: add support for R_I2C on H616

Jernej Skrabec jernej.skrabec at siol.net
Sun Jan 3 10:26:26 CET 2021


This port is needed for communication with PMIC. SPL uses it to set DRAM
voltage on H616 boards.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
 board/sunxi/board.c                    | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index cdb7dbd5b8e5..de77bf638e21 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -220,6 +220,7 @@ enum sunxi_gpio_number {
 #define SUN8I_A23_GPL_R_TWI	3
 #define SUN8I_GPL_R_UART	2
 #define SUN50I_GPL_R_TWI	2
+#define SUN50I_H616_GPL_R_TWI	3
 
 #define SUN9I_GPN_R_RSB		3
 
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 54ff9bc92396..727e8320318f 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -196,6 +196,10 @@ void i2c_init_board(void)
 	clock_twi_onoff(5, 1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
+#elif CONFIG_MACH_SUN50I_H616
+	clock_twi_onoff(5, 1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN50I_H616_GPL_R_TWI);
+	sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN50I_H616_GPL_R_TWI);
 #else
 	clock_twi_onoff(5, 1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
-- 
2.30.0



More information about the U-Boot mailing list