[PATCH 2/2] sunxi: Add support for Tanix TX6

[Jernej Skrabec]

This commit adds support for Tanix TX6 TV box, based on H6. It's low end
H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other
peripherals.

DT file is taken from Linux 5.11-rc1 release.

Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
 arch/arm/dts/Makefile                |   3 +-
 arch/arm/dts/sun50i-h6-tanix-tx6.dts | 124 +++++++++++++++++++++++++++
 board/sunxi/MAINTAINERS              |   6 ++
 3 files changed, 132 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/sun50i-h6-tanix-tx6.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fd47e408f826..e00aed1ec207 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -607,7 +607,8 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
 	sun50i-h6-beelink-gs1.dtb \
 	sun50i-h6-orangepi-lite2.dtb \
 	sun50i-h6-orangepi-one-plus.dtb \
-	sun50i-h6-pine-h64.dtb
+	sun50i-h6-pine-h64.dtb \
+	sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-amarula-relic.dtb \
 	sun50i-a64-bananapi-m64.dtb \
diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6.dts b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
new file mode 100644
index 000000000000..be81330db14f
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec at siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index d3755ae41a9d..1b37a9899edd 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -489,6 +489,12 @@ S:	Maintained
 F:	configs/Sunchip_CX-A99_defconfig
 W:	https://linux-sunxi.org/Sunchip_CX-A99
 
+TANIX TX6 BOARD
+M:	Jernej Skrabec <jernej.skrabec at siol.net>
+S:	Maintained
+F:	configs/tanix_tx6_defconfig
+W:	https://linux-sunxi.org/Tanix_TX6
+
 TBS A711 BOARD
 M:	Maxime Ripard <mripard at kernel.org>
 S:	Maintained
-- 
2.30.0