[PATCH V2 09/12] arm: dts: imx8mm: sync dts from Linux Kernel
Peng Fan (OSS)
peng.fan at oss.nxp.com
Sun Jan 3 11:11:41 CET 2021
From: Peng Fan <peng.fan at nxp.com>
Sync dts from Linux Kernel
commit f838f8d2b694cf9d524dc("mfd: ab8500-debugfs: Remove extraneous seq_putc")
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
arch/arm/dts/imx8mm-evk.dts | 534 ++++-------------------
arch/arm/dts/imx8mm-evk.dtsi | 489 +++++++++++++++++++++
arch/arm/dts/imx8mm.dtsi | 172 ++++++--
include/dt-bindings/clock/imx8mm-clock.h | 28 +-
4 files changed, 740 insertions(+), 483 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
diff --git a/arch/arm/dts/imx8mm-evk.dts b/arch/arm/dts/imx8mm-evk.dts
index ef249ff519..4e2820d192 100644
--- a/arch/arm/dts/imx8mm-evk.dts
+++ b/arch/arm/dts/imx8mm-evk.dts
@@ -1,309 +1,61 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
-#include "imx8mm.dtsi"
+#include "imx8mm-evk.dtsi"
/ {
model = "FSL i.MX8MM EVK board";
compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
- chosen {
- stdout-path = &uart2;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_led>;
-
- status {
- label = "status";
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- wm8524: audio-codec {
- #sound-dai-cells = <0>;
- compatible = "wlf,wm8524";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_wlf>;
- wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
- };
-
- sound-wm8524 {
- compatible = "simple-audio-card";
- simple-audio-card,name = "wm8524-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&cpudai>;
- simple-audio-card,bitclock-master = <&cpudai>;
- simple-audio-card,widgets =
- "Line", "Left Line Out Jack",
- "Line", "Right Line Out Jack";
- simple-audio-card,routing =
- "Left Line Out Jack", "LINEVOUTL",
- "Right Line Out Jack", "LINEVOUTR";
-
- cpudai: simple-audio-card,cpu {
- sound-dai = <&sai3>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8524>;
- clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
- };
+ aliases {
+ spi0 = &flexspi;
};
};
-&A53_0 {
- cpu-supply = <&buck2_reg>;
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- pmic at 4b {
- compatible = "rohm,bd71847";
- reg = <0x4b>;
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 GPIO_ACTIVE_LOW>;
- rohm,reset-snvs-powered;
-
- regulators {
- buck1_reg: BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
- };
-
- buck3_reg: BUCK3 {
- // BUCK5 in datasheet
- regulator-name = "BUCK3";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1350000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- // BUCK6 in datasheet
- regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5_reg: BUCK5 {
- // BUCK7 in datasheet
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1605000>;
- regulator-max-microvolt = <1995000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- // BUCK8 in datasheet
- regulator-name = "BUCK6";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
- ldo2_reg: LDO2 {
- regulator-name = "LDO2";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-boot-on;
- regulator-always-on;
- };
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
- ldo3_reg: LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "LDO6";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
};
- };
-};
-&i2c2 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
- ptn5110: tcpc at 50 {
- compatible = "nxp,ptn5110";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_typec1>;
- reg = <0x50>;
- interrupt-parent = <&gpio2>;
- interrupts = <11 8>;
- status = "okay";
-
- port {
- typec1_dr_sw: endpoint {
- remote-endpoint = <&usb1_drd_sw>;
- };
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
};
- typec1_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "dual";
- data-role = "dual";
- try-power-role = "sink";
- source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
- PDO_VAR(5000, 20000, 3000)>;
- op-sink-microwatt = <15000000>;
- self-powered;
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
};
};
};
-&i2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- pca6416: gpio at 20 {
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&sai3 {
+&flexspi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai3>;
- assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
- assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
- assigned-clock-rates = <24576000>;
+ pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
-};
-
-&snvs_pwrkey {
- status = "okay";
-};
-&uart2 { /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "otg";
- hnp-disable;
- srp-disable;
- adp-disable;
- usb-role-switch;
- status = "okay";
-
- port {
- usb1_drd_sw: endpoint {
- remote-endpoint = <&typec1_dr_sw>;
- };
+ flash at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
};
};
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- vmmc-supply = <®_usdhc2_vmmc>;
- status = "okay";
-};
-
&usdhc3 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
@@ -313,196 +65,64 @@
status = "okay";
};
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
- pinctrl-names = "default";
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
- MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
- MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
- MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
- MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
- >;
- };
-
- pinctrl_gpio_led: gpioledgrp {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
- >;
- };
-
- pinctrl_gpio_wlf: gpiowlfgrp {
+ pinctrl_flexspi: flexspigrp {
fsl,pins = <
- MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
- MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
- MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
- MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
- >;
- };
-
- pinctrl_pmic: pmicirq {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
- >;
- };
-
- pinctrl_sai3: sai3grp {
- fsl,pins = <
- MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
- MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
- MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
- MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
- >;
- };
-
- pinctrl_typec1: typec1grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
- MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
- fsl,pins = <
- MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
- MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
- MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
- MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
- MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
- MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
- MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
- fsl,pins = <
- MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
- MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
- MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
- MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
- MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
- MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
- MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
- MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
- MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
- MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
- MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
>;
};
};
diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
new file mode 100644
index 0000000000..6518f088b2
--- /dev/null
+++ b/arch/arm/dts/imx8mm-evk.dtsi
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ status {
+ label = "status";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir>;
+ linux,autosuspend-period = <125>;
+ };
+
+ wm8524: audio-codec {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_wlf>;
+ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-wm8524 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8524-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Line", "Left Line Out Jack",
+ "Line", "Right Line Out Jack";
+ simple-audio-card,routing =
+ "Left Line Out Jack", "LINEVOUTL",
+ "Right Line Out Jack", "LINEVOUTR";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8524>;
+ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic at 4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ ptn5110: tcpc at 50 {
+ compatible = "nxp,ptn5110";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec1>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 8>;
+ status = "okay";
+
+ port {
+ typec1_dr_sw: endpoint {
+ remote-endpoint = <&usb1_drd_sw>;
+ };
+ };
+
+ typec1_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 20000, 3000)>;
+ op-sink-microwatt = <15000000>;
+ self-powered;
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ pca6416: gpio at 20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+
+ port {
+ usb1_drd_sw: endpoint {
+ remote-endpoint = <&typec1_dr_sw>;
+ };
+ };
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_ir: irgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
+ >;
+ };
+
+ pinctrl_gpio_wlf: gpiowlfgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
+
+ pinctrl_typec1: typec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 1e5e11592f..c824f2615f 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -18,10 +18,18 @@
aliases {
ethernet0 = &fec1;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -29,14 +37,6 @@
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
};
cpus {
@@ -68,6 +68,7 @@
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_1: cpu at 1 {
@@ -80,6 +81,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_2: cpu at 2 {
@@ -92,6 +94,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_3: cpu at 3 {
@@ -104,6 +107,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -125,7 +129,7 @@
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <900000>;
+ opp-microvolt = <950000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
@@ -190,20 +194,52 @@
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7
- (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
clock-frequency = <8000000>;
arm,no-tick-in-suspend;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -227,12 +263,14 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus at 30000000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
sai1: sai at 30010000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -246,6 +284,7 @@
};
sai2: sai at 30020000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -273,6 +312,7 @@
};
sai5: sai at 30050000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,6 +326,7 @@
};
sai6: sai at 30060000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,6 +339,49 @@
status = "disabled";
};
+ micfil: audio-controller at 30080000 {
+ compatible = "fsl,imx8mm-micfil";
+ reg = <0x30080000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+ <&clk IMX8MM_CLK_PDM_ROOT>,
+ <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>,
+ <&clk IMX8MM_CLK_EXT3>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&sdma2 24 25 0x80000000>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ spdif1: spdif at 30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MM_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
gpio1: gpio at 30200000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
@@ -363,6 +447,13 @@
gpio-ranges = <&iomuxc 0 119 30>;
};
+ tmu: tmu at 30260000 {
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
+ };
+
wdog1: watchdog at 30280000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
@@ -419,7 +510,7 @@
reg = <0x30340000 0x10000>;
};
- ocotp: ocotp-ctrl at 30350000 {
+ ocotp: efuse at 30350000 {
compatible = "fsl,imx8mm-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
@@ -455,6 +546,8 @@
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+ clock-names = "snvs-pwrkey";
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
@@ -469,16 +562,20 @@
<&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
- assigned-clocks = <&clk IMX8MM_CLK_NOC>,
+ assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
+ <&clk IMX8MM_CLK_A53_CORE>,
+ <&clk IMX8MM_CLK_NOC>,
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>,
<&clk IMX8MM_AUDIO_PLL2>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_ARM_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_SYS_PLL1_800M>;
- assigned-clock-rates = <0>,
+ assigned-clock-rates = <0>, <0>, <0>,
<400000000>,
<400000000>,
<750000000>,
@@ -496,7 +593,8 @@
};
aips2: bus at 30400000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -555,10 +653,12 @@
};
aips3: bus at 30800000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x30800000 0x30800000 0x400000>;
+ ranges = <0x30800000 0x30800000 0x400000>,
+ <0x8000000 0x8000000 0x10000000>;
ecspi1: spi at 30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -718,6 +818,14 @@
status = "disabled";
};
+ mu: mailbox at 30aa0000 {
+ compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+ #mbox-cells = <2>;
+ };
+
usdhc1: mmc at 30b40000 {
compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
@@ -760,6 +868,19 @@
status = "disabled";
};
+ flexspi: spi at 30bb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,imx8mm-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+ <&clk IMX8MM_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ status = "disabled";
+ };
+
sdma1: dma-controller at 30bd0000 {
compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
@@ -776,7 +897,8 @@
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET1_ROOT>,
<&clk IMX8MM_CLK_ENET_TIMER>,
@@ -800,7 +922,8 @@
};
aips4: bus at 32c00000 {
- compatible = "simple-bus";
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -896,7 +1019,6 @@
ddr-pmu at 3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index 07e6c686f3..e63a5530ae 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -248,6 +248,32 @@
#define IMX8MM_CLK_SNVS_ROOT 228
#define IMX8MM_CLK_GIC 229
-#define IMX8MM_CLK_END 230
+#define IMX8MM_SYS_PLL1_40M_CG 230
+#define IMX8MM_SYS_PLL1_80M_CG 231
+#define IMX8MM_SYS_PLL1_100M_CG 232
+#define IMX8MM_SYS_PLL1_133M_CG 233
+#define IMX8MM_SYS_PLL1_160M_CG 234
+#define IMX8MM_SYS_PLL1_200M_CG 235
+#define IMX8MM_SYS_PLL1_266M_CG 236
+#define IMX8MM_SYS_PLL1_400M_CG 237
+#define IMX8MM_SYS_PLL2_50M_CG 238
+#define IMX8MM_SYS_PLL2_100M_CG 239
+#define IMX8MM_SYS_PLL2_125M_CG 240
+#define IMX8MM_SYS_PLL2_166M_CG 241
+#define IMX8MM_SYS_PLL2_200M_CG 242
+#define IMX8MM_SYS_PLL2_250M_CG 243
+#define IMX8MM_SYS_PLL2_333M_CG 244
+#define IMX8MM_SYS_PLL2_500M_CG 245
+
+#define IMX8MM_CLK_M4_CORE 246
+#define IMX8MM_CLK_VPU_CORE 247
+#define IMX8MM_CLK_GPU3D_CORE 248
+#define IMX8MM_CLK_GPU2D_CORE 249
+
+#define IMX8MM_CLK_CLKO2 250
+
+#define IMX8MM_CLK_A53_CORE 251
+
+#define IMX8MM_CLK_END 252
#endif
--
2.28.0
More information about the U-Boot
mailing list