[PATCH v2 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay

[Pawel Dembicki]

Clock delay in RGMII is required for some boards.

Clock delay is read from phy-mode dts property. Delay is configured via
proper bits in PORT_REG_PHYS_CTRL register.

Cc: Chris Packham <judge.packham at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>
Cc: Tom Rini <trini at konsulko.com>
Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>
---
Changes in v2:
- change source info about delay: from hardcode to phy-mode propoperty in dts

 drivers/net/phy/mv88e61xx.c | 62 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
index 7eff37b244..70adec6578 100644
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -97,6 +97,8 @@
 #define PORT_REG_STATUS_CMODE_1000BASE_X	0x9
 #define PORT_REG_STATUS_CMODE_SGMII		0xa
 
+#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY	BIT(15)
+#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY	BIT(14)
 #define PORT_REG_PHYS_CTRL_PCS_AN_EN	BIT(10)
 #define PORT_REG_PHYS_CTRL_PCS_AN_RST	BIT(9)
 #define PORT_REG_PHYS_CTRL_FC_VALUE	BIT(7)
@@ -729,7 +731,45 @@ unforce:
 static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
 {
 	struct mv88e61xx_phy_priv *priv = phydev->priv;
-	int val;
+	ofnode node;
+	const char *str;
+	int val, phy_mode;
+	u32 phy_handle;
+
+	if (!ofnode_valid(phydev->node)) {
+		node = dev_ofnode(phydev->dev);
+		phy_handle = ofnode_read_u32_default(node, "phy-handle", -ENXIO);
+
+		if (phy_handle == -ENXIO) {
+			node = ofnode_first_subnode(node);
+
+			while (ofnode_valid(node)) {
+				phy_handle = ofnode_read_u32_default(node, "phy-handle", -ENXIO);
+				if (phy_handle != -ENXIO)
+					break;
+				node = ofnode_next_subnode(node);
+			}
+		}
+
+		if (phy_handle != -ENXIO)
+			node = ofnode_get_by_phandle(phy_handle);
+		else
+			node = ofnode_null();
+	} else {
+		node = phy_get_ofnode(phydev);
+	}
+
+	node = ofnode_find_subnode(node, "ports");
+	node = ofnode_first_subnode(node);
+
+	while (ofnode_valid(node)) {
+		u8 port_no = (u8)ofnode_read_u32_default(node, "reg", -1);
+
+		if (port_no == port)
+			break;
+
+		node = ofnode_next_subnode(node);
+	}
 
 	val = mv88e61xx_port_read(phydev, port, PORT_REG_PHYS_CTRL);
 	if (val < 0)
@@ -754,6 +794,26 @@ static int mv88e61xx_fixed_port_setup(struct phy_device *phydev, u8 port)
 		val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
 		       PORT_REG_PHYS_CTRL_LINK_FORCE;
 
+	if (ofnode_valid(node)) {
+		str = ofnode_read_string(node, "phy-mode");
+		if (str)
+			phy_mode = phy_get_interface_by_name(str);
+		switch (phy_mode) {
+		case PHY_INTERFACE_MODE_RGMII_ID:
+			val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
+			val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
+			break;
+		case PHY_INTERFACE_MODE_RGMII_RXID:
+			val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
+			break;
+		case PHY_INTERFACE_MODE_RGMII_TXID:
+			val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
+			break;
+		default:
+			break;
+		}
+	}
+
 	return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
 				   val);
 }
-- 
2.25.1