[linux-sunxi] [PATCH 02/17] sunxi: Introduce common symbol for H6 like SoCs

Jernej Škrabec jernej.skrabec at siol.net
Mon Jan 4 19:28:44 CET 2021


Dne ponedeljek, 04. januar 2021 ob 11:35:41 CET je André Przywara napisal(a):
> On 03/01/2021 23:43, Samuel Holland wrote:
> 
> Hi Jernej,
> 
> thanks for that patch, that's a nice solution to avoid those long #ifdef
> chains!
> 
> > On 1/3/21 3:26 AM, Jernej Skrabec wrote:
> >> It turns out that there are at least 2 other SoCs which have basically
> >> the same memory map, similar clocks and other features as H6. It's very
> >> likely that we'll see more such SoCs in the future. In order to ease
> >> porting to new SoCs and lower ifdef clutter, introduce common symbol for
> >> them.
> >> 
> >> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> >> ---
> >> 
> >>  arch/arm/include/asm/arch-sunxi/boot0.h |  2 +-
> >>  arch/arm/include/asm/arch-sunxi/clock.h |  2 +-
> >>  arch/arm/include/asm/arch-sunxi/cpu.h   |  2 +-
> >>  arch/arm/include/asm/arch-sunxi/timer.h |  2 +-
> >>  arch/arm/mach-sunxi/Kconfig             | 21 +++++++++++++--------
> >>  arch/arm/mach-sunxi/Makefile            |  2 +-
> >>  arch/arm/mach-sunxi/board.c             |  4 ++--
> >>  arch/arm/mach-sunxi/rmr_switch.S        |  2 +-
> >>  common/spl/Kconfig                      |  4 ++--
> >>  include/configs/sun50i.h                |  2 +-
> >>  10 files changed, 24 insertions(+), 19 deletions(-)
> >> 
> >> diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h
> >> b/arch/arm/include/asm/arch-sunxi/boot0.h index
> >> 46d0f0666c2b..e8e8e38f0556 100644
> >> --- a/arch/arm/include/asm/arch-sunxi/boot0.h
> >> +++ b/arch/arm/include/asm/arch-sunxi/boot0.h
> >> @@ -39,7 +39,7 @@
> >> 
> >>  	.word	0xf57ff06f	// isb     sy
> >>  	.word	0xe320f003	// wfi
> >>  	.word	0xeafffffd	// b       @wfi
> >> 
> >> -#ifndef CONFIG_MACH_SUN50I_H6
> >> +#ifndef CONFIG_SUN50I_GEN_H6
> >> 
> >>  	.word	0x017000a0	// writeable RVBAR mapping address
> >>  
> >>  #else
> >>  
> >>  	.word	0x09010040	// writeable RVBAR mapping address
> >> 
> >> diff --git a/arch/arm/include/asm/arch-sunxi/clock.h
> >> b/arch/arm/include/asm/arch-sunxi/clock.h index
> >> 5994130e6b54..cbbe5c7a1e68 100644
> >> --- a/arch/arm/include/asm/arch-sunxi/clock.h
> >> +++ b/arch/arm/include/asm/arch-sunxi/clock.h
> >> @@ -16,7 +16,7 @@
> >> 
> >>  /* clock control module regs definition */
> >>  #if defined(CONFIG_MACH_SUN8I_A83T)
> >>  #include <asm/arch/clock_sun8i_a83t.h>
> >> 
> >> -#elif defined(CONFIG_MACH_SUN50I_H6)
> >> +#elif defined(CONFIG_SUN50I_GEN_H6)
> >> 
> >>  #include <asm/arch/clock_sun50i_h6.h>
> >>  #elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
> >>  
> >>        defined(CONFIG_MACH_SUN50I)
> >> 
> >> diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h
> >> b/arch/arm/include/asm/arch-sunxi/cpu.h index 8b57d24e2f0c..b08f2023748c
> >> 100644
> >> --- a/arch/arm/include/asm/arch-sunxi/cpu.h
> >> +++ b/arch/arm/include/asm/arch-sunxi/cpu.h
> >> @@ -8,7 +8,7 @@
> >> 
> >>  #if defined(CONFIG_MACH_SUN9I)
> >>  #include <asm/arch/cpu_sun9i.h>
> >> 
> >> -#elif defined(CONFIG_MACH_SUN50I_H6)
> >> +#elif defined(CONFIG_SUN50I_GEN_H6)
> >> 
> >>  #include <asm/arch/cpu_sun50i_h6.h>
> >>  #else
> >>  #include <asm/arch/cpu_sun4i.h>
> >> 
> >> diff --git a/arch/arm/include/asm/arch-sunxi/timer.h
> >> b/arch/arm/include/asm/arch-sunxi/timer.h index
> >> 6f138d04b806..bb5626d893bb 100644
> >> --- a/arch/arm/include/asm/arch-sunxi/timer.h
> >> +++ b/arch/arm/include/asm/arch-sunxi/timer.h
> >> @@ -76,7 +76,7 @@ struct sunxi_timer_reg {
> >> 
> >>  	struct sunxi_tgp tgp[4];
> >>  	u8 res5[8];
> >>  	u32 cpu_cfg;
> >> 
> >> -#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
> >> +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> >> 
> >>  	u8 res3[16];
> >>  	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
> >>  
> >>  #endif
> >> 
> >> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> >> index 49ef217f08c0..1cf79bad7cf6 100644
> >> --- a/arch/arm/mach-sunxi/Kconfig
> >> +++ b/arch/arm/mach-sunxi/Kconfig
> >> @@ -82,7 +82,7 @@ config SUN8I_RSB
> >> 
> >>  config SUNXI_SRAM_ADDRESS
> >>  
> >>  	hex
> >>  	default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
> >> 
> >> -	default 0x20000 if MACH_SUN50I_H6
> >> +	default 0x20000 if SUN50I_GEN_H6
> >> 
> >>  	default 0x0
> >>  	---help---
> >>  	Older Allwinner SoCs have their mask boot ROM mapped just below 
4GB,
> >> 
> >> @@ -108,6 +108,15 @@ config SUNXI_GEN_SUN6I
> >> 
> >>  	separate ahb reset control registers, custom pmic bus, new style
> >>  	watchdog, etc.
> >> 
> >> +config SUN50I_GEN_H6
> > 
> > The new memory map is also used for 32-bit SoCs V5 (sun8iw12p1) and
> > newer. So this is not sun50i-specific, and I'd suggest SUNXI_GEN_H6 (or
> > even SUNXI_GEN_H6_V5). It is unfortunate there appears to be no name for
> > this family.
> 
> Yeah, the Allwinner generation naming being *core* dependent is really
> annyoing and not helpful.
> I am fine with a rename, but then it would be very close to
> "CONFIG_SUNXI_GEN_SUN6I", which is quite confusing to any readers
> (already stumbled upon it myself in patch 04/17).
> 
> Any opinions?

I would leave it as it is, it's common to name something, usually driver, but 
in this case symbol, after first known device that implemented particular 
feature.

> 
> >> +	bool
> >> +	select FIT
> >> +	select SPL_LOAD_FIT
> >> +	select SUPPORT_SPL
> >> +	---help---
> >> +	Select this for sunxi SoCs which have H6 like peripherals, clocks
> >> +	and memory map.
> >> +
> >> 
> >>  config SUNXI_DRAM_DW
> >>  
> >>  	bool
> >>  	---help---
> >> 
> >> @@ -302,10 +311,7 @@ config MACH_SUN50I_H5
> >> 
> >>  config MACH_SUN50I_H6
> >>  
> >>  	bool "sun50i (Allwinner H6)"
> >>  	select ARM64
> >> 
> >> -	select SUPPORT_SPL
> >> -	select FIT
> >> 
> >>  	select PHY_SUN4I_USB
> >> 
> >> -	select SPL_LOAD_FIT
> >> 
> >>  	select DRAM_SUN50I_H6
> > 
> > I would expect this to select SUN50I_GEN_H6.
> 
> Indeed, that breaks H6 builds.

Ops, leftover after refactoring.

> 
> >>  endchoice
> >> 
> >> @@ -540,7 +546,6 @@ config SYS_CLK_FREQ
> >> 
> >>  	default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
> >>  	default 1008000000 if MACH_SUN8I
> >>  	default 1008000000 if MACH_SUN9I
> >> 
> >> -	default 888000000 if MACH_SUN50I_H6
> > 
> > Was this removal intentional? You later add a different value for H616
> > only.> 

That's also an oversight after refactoring.

> >>  config SYS_CONFIG_NAME
> >>  
> >>  	default "sun4i" if MACH_SUN4I
> >> 
> >> @@ -756,7 +761,7 @@ config VIDEO_SUNXI
> >> 
> >>  	depends on !MACH_SUN8I_V3S
> >>  	depends on !MACH_SUN9I
> >>  	depends on !MACH_SUN50I
> >> 
> >> -	depends on !MACH_SUN50I_H6
> >> +	depends on !SUN50I_GEN_H6
> >> 
> >>  	select VIDEO
> >>  	imply VIDEO_DT_SIMPLEFB
> >>  	default y
> >> 
> >> @@ -989,11 +994,11 @@ config SPL_STACK_R_ADDR
> >> 
> >>  	default 0x4fe00000 if MACH_SUN8I
> >>  	default 0x2fe00000 if MACH_SUN9I
> >>  	default 0x4fe00000 if MACH_SUN50I
> >> 
> >> -	default 0x4fe00000 if MACH_SUN50I_H6
> >> +	default 0x4fe00000 if SUN50I_GEN_H6
> >> 
> >>  config SPL_SPI_SUNXI
> >>  
> >>  	bool "Support for SPI Flash on Allwinner SoCs in SPL"
> >> 
> >> -	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || 
MACH_SUNXI_H3_H5
> >> || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6 +	depends on
> >> MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 ||
> >> MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6
> I know I suggested this, but it was a bit premature. The SPL SPI code
> needs some adjustments first. I have a patch, will send it ASAP. But for
> now you can just drop this change.

Ok,

Best regards,
Jernej

> 
> Thanks!
> Andre
> 
> >>  	help
> >>  	
> >>  	  Enable support for SPI Flash. This option allows SPL to read 
from
> >>  	  sunxi SPI Flash. It uses the same method as the boot ROM, so 
does
> >> 
> >> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
> >> index d129f334798b..b8aca43d6630 100644
> >> --- a/arch/arm/mach-sunxi/Makefile
> >> +++ b/arch/arm/mach-sunxi/Makefile
> >> @@ -26,7 +26,7 @@ else
> >> 
> >>  obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
> >>  endif
> >>  obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o gtbus_sun9i.o
> >> 
> >> -obj-$(CONFIG_MACH_SUN50I_H6)	+= clock_sun50i_h6.o
> >> +obj-$(CONFIG_SUN50I_GEN_H6)	+= clock_sun50i_h6.o
> >> 
> >>  ifdef CONFIG_SPL_BUILD
> >>  obj-$(CONFIG_DRAM_SUN4I)	+= dram_sun4i.o
> >> 
> >> diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
> >> index f40fccd8f8b9..7a8b303f233c 100644
> >> --- a/arch/arm/mach-sunxi/board.c
> >> +++ b/arch/arm/mach-sunxi/board.c
> >> @@ -144,7 +144,7 @@ static int gpio_init(void)
> >> 
> >>  #error Unsupported console port number. Please fix pin mux settings in
> >>  board.c #endif
> >> 
> >> -#ifdef CONFIG_MACH_SUN50I_H6
> >> +#ifdef CONFIG_SUN50I_GEN_H6
> >> 
> >>  	/* Update PIO power bias configuration by copy hardware detected 
value
> >>  	*/
> >>  	val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
> >>  	writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
> >> 
> >> @@ -329,7 +329,7 @@ void reset_cpu(ulong addr)
> >> 
> >>  		/* sun5i sometimes gets stuck without this */
> >>  		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
> >>  	
> >>  	}
> >> 
> >> -#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
> >> +#elif defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> >> 
> >>  #if defined(CONFIG_MACH_SUN50I_H6)
> >>  
> >>  	/* WDOG is broken for some H6 rev. use the R_WDOG instead */
> >>  	static const struct sunxi_wdog *wdog =
> >> 
> >> diff --git a/arch/arm/mach-sunxi/rmr_switch.S
> >> b/arch/arm/mach-sunxi/rmr_switch.S index fafd306f95b1..33e55d496865
> >> 100644
> >> --- a/arch/arm/mach-sunxi/rmr_switch.S
> >> +++ b/arch/arm/mach-sunxi/rmr_switch.S
> >> @@ -30,7 +30,7 @@
> >> 
> >>  .text
> >> 
> >> -#ifndef CONFIG_MACH_SUN50I_H6
> >> +#ifndef CONFIG_SUN50I_GEN_H6
> >> 
> >>  	ldr	r1, =0x017000a0		@ MMIO mapped 
RVBAR[0] register
> >>  
> >>  #else
> >>  
> >>  	ldr	r1, =0x09010040		@ MMIO mapped 
RVBAR[0] register
> >> 
> >> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> >> index d8086bd9e874..bed715774d81 100644
> >> --- a/common/spl/Kconfig
> >> +++ b/common/spl/Kconfig
> >> @@ -150,7 +150,7 @@ config SPL_TEXT_BASE
> >> 
> >>  	hex "SPL Text Base"
> >>  	default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || 
ARCH_KEYSTONE
> >>  	default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I
> >> 
> >> -	default 0x20060 if MACH_SUN50I_H6
> >> +	default 0x20060 if SUN50I_GEN_H6
> >> 
> >>  	default 0x00060 if ARCH_SUNXI
> >>  	default 0xfffc0000 if ARCH_ZYNQMP
> >>  	default 0x0
> >> 
> >> @@ -459,7 +459,7 @@ config SPL_SHA512_SUPPORT
> >> 
> >>  config SPL_FIT_IMAGE_TINY
> >>  
> >>  	bool "Remove functionality from SPL FIT loading to reduce size"
> >>  	depends on SPL_FIT
> >> 
> >> -	default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
> >> +	default y if MACH_SUN50I || MACH_SUN50I_H5 || SUN50I_GEN_H6
> > 
> > This can probably be simplified to ARCH_SUNXI.
> > 
> >>  	default y if ARCH_IMX8M
> >>  	help
> >>  	
> >>  	  Enable this to reduce the size of the FIT image loading code
> >> 
> >> diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h
> >> index e050a5299f3b..bc2e3a3d0088 100644
> >> --- a/include/configs/sun50i.h
> >> +++ b/include/configs/sun50i.h
> >> @@ -10,7 +10,7 @@
> >> 
> >>   * A64 specific configuration
> >>   */
> >> 
> >> -#ifndef CONFIG_MACH_SUN50I_H6
> >> +#ifndef CONFIG_SUN50I_GEN_H6
> >> 
> >>  #define GICD_BASE		0x1c81000
> >>  #define GICC_BASE		0x1c82000
> >>  #else
> > 
> > Cheers,
> > Samuel






More information about the U-Boot mailing list