[PATCH 01/17] sunxi: Add support for AXP305 PMIC
Jaehoon Chung
jh80.chung at samsung.com
Tue Jan 5 23:36:05 CET 2021
Hi Jernej
On 1/3/21 6:26 PM, Jernej Skrabec wrote:
> This PMIC can be found on H616 boards and it's very similar to AXP805
> and AXP806.
Is there any plan to cleanup codes?
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
> arch/arm/mach-sunxi/pmic_bus.c | 6 +++
> board/sunxi/board.c | 10 +++--
> drivers/power/Kconfig | 13 +++++-
> drivers/power/Makefile | 1 +
> drivers/power/axp305.c | 80 ++++++++++++++++++++++++++++++++++
> include/axp305.h | 17 ++++++++
> include/axp_pmic.h | 3 ++
> 7 files changed, 126 insertions(+), 4 deletions(-)
> create mode 100644 drivers/power/axp305.c
> create mode 100644 include/axp305.h
>
> diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c
> index dea42de833f1..0394ce856448 100644
> --- a/arch/arm/mach-sunxi/pmic_bus.c
> +++ b/arch/arm/mach-sunxi/pmic_bus.c
> @@ -18,6 +18,8 @@
>
> #define AXP209_I2C_ADDR 0x34
>
> +#define AXP305_I2C_ADDR 0x36
> +
> #define AXP221_CHIP_ADDR 0x68
> #define AXP221_CTRL_ADDR 0x3e
> #define AXP221_INIT_DATA 0x3e
> @@ -64,6 +66,8 @@ int pmic_bus_read(u8 reg, u8 *data)
> return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
> #elif defined CONFIG_AXP209_POWER
> return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
> +#elif defined CONFIG_AXP305_POWER
> + return i2c_read(AXP305_I2C_ADDR, reg, 1, data, 1);
> #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
> # ifdef CONFIG_MACH_SUN6I
> return p2wi_read(reg, data);
> @@ -81,6 +85,8 @@ int pmic_bus_write(u8 reg, u8 data)
> return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
> #elif defined CONFIG_AXP209_POWER
> return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
> +#elif defined CONFIG_AXP305_POWER
> + return i2c_write(AXP305_I2C_ADDR, reg, 1, &data, 1);
> #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
> # ifdef CONFIG_MACH_SUN6I
> return p2wi_write(reg, data);
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index 708a27ed78e9..54ff9bc92396 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -634,16 +634,18 @@ void sunxi_board_init(void)
> #endif
>
> #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
> - defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
> - defined CONFIG_AXP818_POWER
> + defined CONFIG_AXP221_POWER || defined CONFIG_AXP305_POWER || \
> + defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
> power_failed = axp_init();
>
> #if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
> defined CONFIG_AXP818_POWER
> power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
> #endif
> +#if !defined(CONFIG_AXP305_POWER)
> power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
> power_failed |= axp_set_dcdc3(CONFIG_AXP_DCDC3_VOLT);
> +#endif
> #if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER)
> power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
> #endif
> @@ -656,8 +658,10 @@ void sunxi_board_init(void)
> defined CONFIG_AXP818_POWER
> power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
> #endif
> +#if !defined(CONFIG_AXP305_POWER)
> power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
> -#if !defined(CONFIG_AXP152_POWER)
> +#endif
> +#if !defined(CONFIG_AXP152_POWER) && !defined(CONFIG_AXP305_POWER)
> power_failed |= axp_set_aldo3(CONFIG_AXP_ALDO3_VOLT);
> #endif
> #ifdef CONFIG_AXP209_POWER
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 02050f6f3569..d17cf2d9112a 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -48,6 +48,15 @@ config AXP221_POWER
> Select this to enable support for the axp221/axp223 pmic found on most
> A23 and A31 boards.
>
> +config AXP305_POWER
> + bool "axp305 pmic support"
> + depends on MACH_SUN50I_H616
> + select AXP_PMIC_BUS
> + select CMD_POWEROFF
> + ---help---
> + Select this to enable support for the axp305 pmic found on most
> + H616 boards.
> +
> config AXP809_POWER
> bool "axp809 pmic support"
> depends on MACH_SUN9I
> @@ -127,11 +136,12 @@ config AXP_DCDC3_VOLT
>
> config AXP_DCDC4_VOLT
> int "axp pmic dcdc4 voltage"
> - depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
> + depends on AXP152_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP305_POWER
> default 1250 if AXP152_POWER
> default 1200 if MACH_SUN6I
> default 0 if MACH_SUN8I
> default 900 if MACH_SUN9I
> + default 1500 if AXP305_POWER
> ---help---
> Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
> disable dcdc4.
> @@ -140,6 +150,7 @@ config AXP_DCDC4_VOLT
> On A23 / A33 boards dcdc4 is unused and should be disabled.
> On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
> On A83T boards dcdc4 is used for VDD-GPU.
> + On H616 boards dcdcd is used for VCC-DRAM.
>
> config AXP_DCDC5_VOLT
> int "axp pmic dcdc5 voltage"
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 2dcc7bb99d02..0bef06920a7d 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_AXP152_POWER) += axp152.o
> obj-$(CONFIG_AXP209_POWER) += axp209.o
> obj-$(CONFIG_AXP221_POWER) += axp221.o
> +obj-$(CONFIG_AXP305_POWER) += axp305.o
> obj-$(CONFIG_AXP809_POWER) += axp809.o
> obj-$(CONFIG_AXP818_POWER) += axp818.o
> obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
> diff --git a/drivers/power/axp305.c b/drivers/power/axp305.c
> new file mode 100644
> index 000000000000..f620798bb1d7
> --- /dev/null
> +++ b/drivers/power/axp305.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AXP305 driver
> + *
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + *
> + * Based on axp221.c
> + * (C) Copyright 2014 Hans de Goede <hdegoede at redhat.com>
> + * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <errno.h>
> +#include <asm/arch/pmic_bus.h>
> +#include <axp_pmic.h>
> +
> +static u8 axp305_mvolt_to_cfg(int mvolt, int min, int max, int div)
> +{
> + if (mvolt < min)
> + mvolt = min;
> + else if (mvolt > max)
> + mvolt = max;
> +
> + return (mvolt - min) / div;
> +}
> +
> +int axp_set_dcdc4(unsigned int mvolt)
> +{
> + int ret;
Initialized ret value to 0.
> + u8 cfg;
> +
> + if (mvolt >= 1600)
> + cfg = 46 + axp305_mvolt_to_cfg(mvolt, 1600, 3300, 100);
Could you use macro instead of 46 (magic code)?
> + else
> + cfg = axp305_mvolt_to_cfg(mvolt, 600, 1500, 20);
> +
> + if (mvolt == 0)
> + return pmic_bus_clrbits(AXP305_OUTPUT_CTRL1,
> + AXP305_OUTPUT_CTRL1_DCDCD_EN);
> +
> + ret = pmic_bus_write(AXP305_DCDCD_VOLTAGE, cfg);
> + if (ret)
> + return ret;
> +
> + return pmic_bus_setbits(AXP305_OUTPUT_CTRL1,
> + AXP305_OUTPUT_CTRL1_DCDCD_EN);
> +}
> +
> +int axp_init(void)
> +{
> + u8 axp_chip_id;
> + int ret;
> +
> + ret = pmic_bus_init();
> + if (ret)
> + return ret;
> +
> + ret = pmic_bus_read(AXP305_CHIP_VERSION, &axp_chip_id);
> + if (ret)
> + return ret;
> +
> + if ((axp_chip_id & AXP305_CHIP_VERSION_MASK) != 0x40)
Ditto, use macro instead of 0x40.
> + return -ENODEV;
> +
> + return ret;
> +}
> +
> +#ifndef CONFIG_PSCI_RESET
> +int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> +{
> + pmic_bus_write(AXP305_SHUTDOWN, AXP305_POWEROFF);
> +
> + /* infinite loop during shutdown */
> + while (1) {}
> +
> + /* not reached */
> + return 0;
> +}
> +#endif
> diff --git a/include/axp305.h b/include/axp305.h
> new file mode 100644
> index 000000000000..225c5040a322
> --- /dev/null
> +++ b/include/axp305.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + */
> +
> +enum axp305_reg {
> + AXP305_CHIP_VERSION = 0x3,
> + AXP305_OUTPUT_CTRL1 = 0x10,
> + AXP305_DCDCD_VOLTAGE = 0x15,
> + AXP305_SHUTDOWN = 0x32,
> +};
> +
> +#define AXP305_CHIP_VERSION_MASK 0xcf
> +
> +#define AXP305_OUTPUT_CTRL1_DCDCD_EN (1 << 3)
> +
> +#define AXP305_POWEROFF (1 << 7)
> diff --git a/include/axp_pmic.h b/include/axp_pmic.h
> index 10091d0bb278..405044c3a32f 100644
> --- a/include/axp_pmic.h
> +++ b/include/axp_pmic.h
> @@ -15,6 +15,9 @@
> #ifdef CONFIG_AXP221_POWER
> #include <axp221.h>
> #endif
> +#ifdef CONFIG_AXP305_POWER
> +#include <axp305.h>
> +#endif
> #ifdef CONFIG_AXP809_POWER
> #include <axp809.h>
> #endif
>
More information about the U-Boot
mailing list