[PATCH v2 1/2] ARM: dts: sunxi: h6: Update DT files
Jernej Škrabec
jernej.skrabec at siol.net
Wed Jan 6 17:29:05 CET 2021
Dne sreda, 06. januar 2021 ob 16:41:02 CET je André Przywara napisal(a):
> On 03/01/2021 10:00, Jernej Skrabec wrote:
> > Updated H6 DT files are based on Linux 5.11-rc1 release.
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
>
> That looks alright, but it seems like the OrangePi One Plus .dts is not
> updated?
I missed that one.
Best regards,
Jernej
>
> Cheers,
> Andre
>
> > ---
> > arch/arm/dts/sun50i-h6-beelink-gs1.dts | 70 +++-
> > arch/arm/dts/sun50i-h6-cpu-opp.dtsi | 117 +++++++
> > arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 71 +++-
> > arch/arm/dts/sun50i-h6-orangepi.dtsi | 72 +++-
> > arch/arm/dts/sun50i-h6-pine-h64.dts | 102 ++++--
> > arch/arm/dts/sun50i-h6.dtsi | 394 ++++++++++++++++++++--
> > 6 files changed, 758 insertions(+), 68 deletions(-)
> > create mode 100644 arch/arm/dts/sun50i-h6-cpu-opp.dtsi
> >
> > diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-
h6-beelink-gs1.dts
> > index 0dc33c90dd60..7c9dbde645b5 100644
> > --- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
> > @@ -1,11 +1,10 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > -/*
> > - * Copyright (C) 2019 Clément Péron <peron.clem at gmail.com>
> > - */
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2019 Clément Péron <peron.clem at gmail.com>
> >
> > /dts-v1/;
> >
> > #include "sun50i-h6.dtsi"
> > +#include "sun50i-h6-cpu-opp.dtsi"
> >
> > #include <dt-bindings/gpio/gpio.h>
> >
> > @@ -25,6 +24,7 @@
> > connector {
> > compatible = "hdmi-connector";
> > type = "a";
> > + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> >
> > port {
> > hdmi_con_in: endpoint {
> > @@ -33,6 +33,13 @@
> > };
> > };
> >
> > + ext_osc32k: ext_osc32k_clk {
> > + #clock-cells = <0>;
> > + compatible = "fixed-clock";
> > + clock-frequency = <32768>;
> > + clock-output-names = "ext_osc32k";
> > + };
> > +
> > leds {
> > compatible = "gpio-leds";
> >
> > @@ -51,12 +58,38 @@
> > regulator-max-microvolt = <5000000>;
> > regulator-always-on;
> > };
> > +
> > + sound-spdif {
> > + compatible = "simple-audio-card";
> > + simple-audio-card,name = "sun50i-h6-spdif";
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&spdif>;
> > + };
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&spdif_out>;
> > + };
> > + };
> > +
> > + spdif_out: spdif-out {
> > + #sound-dai-cells = <0>;
> > + compatible = "linux,spdif-dit";
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu-supply = <®_dcdca>;
> > };
> >
> > &de {
> > status = "okay";
> > };
> >
> > +&dwc3 {
> > + status = "okay";
> > +};
> > +
> > &ehci0 {
> > status = "okay";
> > };
> > @@ -64,12 +97,17 @@
> > &emac {
> > pinctrl-names = "default";
> > pinctrl-0 = <&ext_rgmii_pins>;
> > - phy-mode = "rgmii";
> > + phy-mode = "rgmii-id";
> > phy-handle = <&ext_rgmii_phy>;
> > phy-supply = <®_aldo2>;
> > status = "okay";
> > };
> >
> > +&gpu {
> > + mali-supply = <®_dcdcc>;
> > + status = "okay";
> > +};
> > +
> > &hdmi {
> > status = "okay";
> > };
> > @@ -201,13 +239,16 @@
> > reg_dcdca: dcdca {
> > regulator-always-on;
> > regulator-min-microvolt =
<810000>;
> > - regulator-max-microvolt =
<1080000>;
> > + regulator-max-microvolt =
<1160000>;
> > + regulator-ramp-delay = <2500>;
> > regulator-name = "vdd-cpu";
> > };
> >
> > reg_dcdcc: dcdcc {
> > + regulator-enable-ramp-delay =
<32000>;
> > regulator-min-microvolt =
<810000>;
> > regulator-max-microvolt =
<1080000>;
> > + regulator-ramp-delay = <2500>;
> > regulator-name = "vdd-gpu";
> > };
> >
> > @@ -232,6 +273,11 @@
> > };
> > };
> >
> > +&r_ir {
> > + linux,rc-map-name = "rc-beelink-gs1";
> > + status = "okay";
> > +};
> > +
> > &r_pio {
> > /*
> > * PL0 and PL1 are used for PMIC I2C
> > @@ -243,6 +289,14 @@
> > vcc-pm-supply = <®_aldo1>;
> > };
> >
> > +&rtc {
> > + clocks = <&ext_osc32k>;
> > +};
> > +
> > +&spdif {
> > + status = "okay";
> > +};
> > +
> > &uart0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&uart0_ph_pins>;
> > @@ -258,3 +312,7 @@
> > usb0_vbus-supply = <®_vcc5v>;
> > status = "okay";
> > };
> > +
> > +&usb3phy {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/arch/arm/dts/sun50i-h6-
cpu-opp.dtsi
> > new file mode 100644
> > index 000000000000..1a5eddc5a40f
> > --- /dev/null
> > +++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
> > @@ -0,0 +1,117 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2020 Ondrej Jirman <megous at megous.com>
> > +// Copyright (C) 2020 Clément Péron <peron.clem at gmail.com>
> > +
> > +/ {
> > + cpu_opp_table: cpu-opp-table {
> > + compatible = "allwinner,sun50i-h6-operating-points";
> > + nvmem-cells = <&cpu_speed_grade>;
> > + opp-shared;
> > +
> > + opp at 480000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <480000000>;
> > +
> > + opp-microvolt-speed0 = <880000 880000
1200000>;
> > + opp-microvolt-speed1 = <820000 820000
1200000>;
> > + opp-microvolt-speed2 = <820000 820000
1200000>;
> > + };
> > +
> > + opp at 720000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <720000000>;
> > +
> > + opp-microvolt-speed0 = <880000 880000
1200000>;
> > + opp-microvolt-speed1 = <820000 820000
1200000>;
> > + opp-microvolt-speed2 = <820000 820000
1200000>;
> > + };
> > +
> > + opp at 816000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <816000000>;
> > +
> > + opp-microvolt-speed0 = <880000 880000
1200000>;
> > + opp-microvolt-speed1 = <820000 820000
1200000>;
> > + opp-microvolt-speed2 = <820000 820000
1200000>;
> > + };
> > +
> > + opp at 888000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <888000000>;
> > +
> > + opp-microvolt-speed0 = <880000 880000
1200000>;
> > + opp-microvolt-speed1 = <820000 820000
1200000>;
> > + opp-microvolt-speed2 = <820000 820000
1200000>;
> > + };
> > +
> > + opp at 1080000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1080000000>;
> > +
> > + opp-microvolt-speed0 = <940000 940000
1200000>;
> > + opp-microvolt-speed1 = <880000 880000
1200000>;
> > + opp-microvolt-speed2 = <880000 880000
1200000>;
> > + };
> > +
> > + opp at 1320000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1320000000>;
> > +
> > + opp-microvolt-speed0 = <1000000 1000000
1200000>;
> > + opp-microvolt-speed1 = <940000 940000
1200000>;
> > + opp-microvolt-speed2 = <940000 940000
1200000>;
> > + };
> > +
> > + opp at 1488000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1488000000>;
> > +
> > + opp-microvolt-speed0 = <1060000 1060000
1200000>;
> > + opp-microvolt-speed1 = <1000000 1000000
1200000>;
> > + opp-microvolt-speed2 = <1000000 1000000
1200000>;
> > + };
> > +
> > + opp at 1608000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1608000000>;
> > +
> > + opp-microvolt-speed0 = <1090000 1090000
1200000>;
> > + opp-microvolt-speed1 = <1030000 1030000
1200000>;
> > + opp-microvolt-speed2 = <1030000 1030000
1200000>;
> > + };
> > +
> > + opp at 1704000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1704000000>;
> > +
> > + opp-microvolt-speed0 = <1120000 1120000
1200000>;
> > + opp-microvolt-speed1 = <1060000 1060000
1200000>;
> > + opp-microvolt-speed2 = <1060000 1060000
1200000>;
> > + };
> > +
> > + opp at 1800000000 {
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + opp-hz = /bits/ 64 <1800000000>;
> > +
> > + opp-microvolt-speed0 = <1160000 1160000
1200000>;
> > + opp-microvolt-speed1 = <1100000 1100000
1200000>;
> > + opp-microvolt-speed2 = <1100000 1100000
1200000>;
> > + };
> > + };
> > +};
> > +
> > +&cpu0 {
> > + operating-points-v2 = <&cpu_opp_table>;
> > +};
> > +
> > +&cpu1 {
> > + operating-points-v2 = <&cpu_opp_table>;
> > +};
> > +
> > +&cpu2 {
> > + operating-points-v2 = <&cpu_opp_table>;
> > +};
> > +
> > +&cpu3 {
> > + operating-points-v2 = <&cpu_opp_table>;
> > +};
> > diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/arch/arm/dts/
sun50i-h6-orangepi-lite2.dts
> > index e098a2475f2d..e8770858b5d0 100644
> > --- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> > +++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
> > @@ -1,11 +1,74 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > -/*
> > - * Copyright (C) 2018 Jagan Teki <jagan at openedev.com>
> > - */
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2018 Jagan Teki <jagan at openedev.com>
> >
> > #include "sun50i-h6-orangepi.dtsi"
> >
> > / {
> > model = "OrangePi Lite2";
> > compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
> > +
> > + aliases {
> > + serial1 = &uart1; /* BT-UART */
> > + };
> > +
> > + wifi_pwrseq: wifi_pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + clocks = <&rtc 1>;
> > + clock-names = "ext_clock";
> > + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
> > + post-power-on-delay-ms = <200>;
> > + };
> > +};
> > +
> > +&mmc1 {
> > + vmmc-supply = <®_cldo2>;
> > + vqmmc-supply = <®_bldo3>;
> > + mmc-pwrseq = <&wifi_pwrseq>;
> > + bus-width = <4>;
> > + non-removable;
> > + status = "okay";
> > +
> > + brcm: sdio-wifi at 1 {
> > + reg = <1>;
> > + compatible = "brcm,bcm4329-fmac";
> > + interrupt-parent = <&r_pio>;
> > + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0
*/
> > + interrupt-names = "host-wake";
> > + };
> > +};
> > +
> > +®_cldo2 {
> > + /*
> > + * This regulator is connected with CLDO3.
> > + * Before the kernel can support synchronized
> > + * enable of coupled regulators, keep them
> > + * both always on as a ugly hack.
> > + */
> > + regulator-always-on;
> > +};
> > +
> > +®_cldo3 {
> > + /*
> > + * This regulator is connected with CLDO2.
> > + * See the comments for CLDO2.
> > + */
> > + regulator-always-on;
> > +};
> > +
> > +/* There's the BT part of the AP6255 connected to that UART */
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> > + uart-has-rtscts;
> > + status = "okay";
> > +
> > + bluetooth {
> > + compatible = "brcm,bcm4345c5";
> > + clocks = <&rtc 1>;
> > + clock-names = "lpo";
> > + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /*
PM2 */
> > + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /*
PM1 */
> > + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4
*/
> > + max-speed = <1500000>;
> > + };
> > };
> > diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-
orangepi.dtsi
> > index 62e27948a3fa..ebc120a9232f 100644
> > --- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
> > +++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
> > @@ -1,8 +1,6 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > -/*
> > - * Copyright (C) 2018 Amarula Solutions
> > - * Author: Jagan Teki <jagan at amarulasolutions.com>
> > - */
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2018 Amarula Solutions
> > +// Author: Jagan Teki <jagan at amarulasolutions.com>
> >
> > /dts-v1/;
> >
> > @@ -22,6 +20,25 @@
> > stdout-path = "serial0:115200n8";
> > };
> >
> > + connector {
> > + compatible = "hdmi-connector";
> > + type = "a";
> > + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> > +
> > + port {
> > + hdmi_con_in: endpoint {
> > + remote-endpoint =
<&hdmi_out_con>;
> > + };
> > + };
> > + };
> > +
> > + ext_osc32k: ext_osc32k_clk {
> > + #clock-cells = <0>;
> > + compatible = "fixed-clock";
> > + clock-frequency = <32768>;
> > + clock-output-names = "ext_osc32k";
> > + };
> > +
> > leds {
> > compatible = "gpio-leds";
> >
> > @@ -47,6 +64,10 @@
> > };
> > };
> >
> > +&de {
> > + status = "okay";
> > +};
> > +
> > &ehci0 {
> > status = "okay";
> > };
> > @@ -55,6 +76,21 @@
> > status = "okay";
> > };
> >
> > +&gpu {
> > + mali-supply = <®_dcdcc>;
> > + status = "okay";
> > +};
> > +
> > +&hdmi {
> > + status = "okay";
> > +};
> > +
> > +&hdmi_out {
> > + hdmi_out_con: endpoint {
> > + remote-endpoint = <&hdmi_con_in>;
> > + };
> > +};
> > +
> > &mmc0 {
> > vmmc-supply = <®_cldo1>;
> > cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> > @@ -70,6 +106,12 @@
> > status = "okay";
> > };
> >
> > +&pio {
> > + vcc-pc-supply = <®_bldo2>;
> > + vcc-pd-supply = <®_cldo1>;
> > + vcc-pg-supply = <®_aldo1>;
> > +};
> > +
> > &r_i2c {
> > status = "okay";
> >
> > @@ -163,6 +205,7 @@
> > };
> >
> > reg_dcdcc: dcdcc {
> > + regulator-enable-ramp-delay =
<32000>;
> > regulator-min-microvolt =
<810000>;
> > regulator-max-microvolt =
<1080000>;
> > regulator-name = "vdd-gpu";
> > @@ -189,6 +232,18 @@
> > };
> > };
> >
> > +&r_ir {
> > + status = "okay";
> > +};
> > +
> > +&r_pio {
> > + vcc-pm-supply = <®_bldo3>;
> > +};
> > +
> > +&rtc {
> > + clocks = <&ext_osc32k>;
> > +};
> > +
> > &uart0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&uart0_ph_pins>;
> > @@ -196,7 +251,12 @@
> > };
> >
> > &usb2otg {
> > - dr_mode = "otg";
> > + /*
> > + * OrangePi Lite 2 and One Plus, where this DT is used, don't
> > + * have a controllable VBUS even though they do have an ID pin.
> > + * Using it as anything but a USB host is unsafe.
> > + */
> > + dr_mode = "host";
> > status = "okay";
> > };
> >
> > diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-
pine-h64.dts
> > index 189834518391..961732c52aa0 100644
> > --- a/arch/arm/dts/sun50i-h6-pine-h64.dts
> > +++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
> > @@ -1,30 +1,38 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > -/*
> > - * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
> > - */
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
> >
> > /dts-v1/;
> >
> > #include "sun50i-h6.dtsi"
> > +#include "sun50i-h6-cpu-opp.dtsi"
> >
> > #include <dt-bindings/gpio/gpio.h>
> >
> > / {
> > - model = "Pine H64";
> > + model = "Pine H64 model A";
> > compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
> >
> > aliases {
> > ethernet0 = &emac;
> > serial0 = &uart0;
> > + spi0 = &spi0;
> > };
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> > - connector {
> > + ext_osc32k: ext_osc32k_clk {
> > + #clock-cells = <0>;
> > + compatible = "fixed-clock";
> > + clock-frequency = <32768>;
> > + clock-output-names = "ext_osc32k";
> > + };
> > +
> > + hdmi_connector: connector {
> > compatible = "hdmi-connector";
> > type = "a";
> > + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> >
> > port {
> > hdmi_con_in: endpoint {
> > @@ -52,6 +60,16 @@
> > };
> > };
> >
> > + reg_gmac_3v3: gmac-3v3 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc-gmac-3v3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + startup-delay-us = <100000>;
> > + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + };
> > +
> > reg_usb_vbus: vbus {
> > compatible = "regulator-fixed";
> > regulator-name = "usb-vbus";
> > @@ -63,25 +81,35 @@
> > };
> > };
> >
> > +&cpu0 {
> > + cpu-supply = <®_dcdca>;
> > +};
> > +
> > +&de {
> > + status = "okay";
> > +};
> > +
> > +&ehci0 {
> > + status = "okay";
> > +};
> > +
> > +&ehci3 {
> > + status = "okay";
> > +};
> > +
> > &emac {
> > pinctrl-names = "default";
> > pinctrl-0 = <&ext_rgmii_pins>;
> > - phy-mode = "rgmii";
> > + phy-mode = "rgmii-id";
> > phy-handle = <&ext_rgmii_phy>;
> > - phy-supply = <®_aldo2>;
> > + phy-supply = <®_gmac_3v3>;
> > allwinner,rx-delay-ps = <200>;
> > allwinner,tx-delay-ps = <200>;
> > status = "okay";
> > };
> >
> > -&mdio {
> > - ext_rgmii_phy: ethernet-phy at 1 {
> > - compatible = "ethernet-phy-ieee802.3-c22";
> > - reg = <1>;
> > - };
> > -};
> > -
> > -&de {
> > +&gpu {
> > + mali-supply = <®_dcdcc>;
> > status = "okay";
> > };
> >
> > @@ -95,12 +123,11 @@
> > };
> > };
> >
> > -&ehci0 {
> > - status = "okay";
> > -};
> > -
> > -&ehci3 {
> > - status = "okay";
> > +&mdio {
> > + ext_rgmii_phy: ethernet-phy at 1 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <1>;
> > + };
> > };
> >
> > &mmc0 {
> > @@ -216,13 +243,16 @@
> > reg_dcdca: dcdca {
> > regulator-always-on;
> > regulator-min-microvolt =
<810000>;
> > - regulator-max-microvolt =
<1080000>;
> > + regulator-max-microvolt =
<1160000>;
> > + regulator-ramp-delay = <2500>;
> > regulator-name = "vdd-cpu";
> > };
> >
> > reg_dcdcc: dcdcc {
> > + regulator-enable-ramp-delay =
<32000>;
> > regulator-min-microvolt =
<810000>;
> > regulator-max-microvolt =
<1080000>;
> > + regulator-ramp-delay = <2500>;
> > regulator-name = "vdd-gpu";
> > };
> >
> > @@ -255,10 +285,36 @@
> > };
> > };
> >
> > +&r_ir {
> > + status = "okay";
> > +};
> > +
> > &r_pio {
> > vcc-pm-supply = <®_aldo1>;
> > };
> >
> > +&rtc {
> > + clocks = <&ext_osc32k>;
> > +};
> > +
> > +/*
> > + * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
> > + * flash and eMMC at the same time, as one of them would fail probing.
> > + * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
> > + * fix this up in no eMMC is connected.
> > + */
> > +&spi0 {
> > + pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
> > + pinctrl-names = "default";
> > + status = "disabled";
> > +
> > + flash at 0 {
> > + compatible = "winbond,w25q128", "jedec,spi-nor";
> > + reg = <0>;
> > + spi-max-frequency = <4000000>;
> > + };
> > +};
> > +
> > &uart0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&uart0_ph_pins>;
> > diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
> > index a117f479ae55..8a62a9fbe347 100644
> > --- a/arch/arm/dts/sun50i-h6.dtsi
> > +++ b/arch/arm/dts/sun50i-h6.dtsi
> > @@ -1,7 +1,5 @@
> > -// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> > -/*
> > - * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
> > - */
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +// Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
> >
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/clock/sun50i-h6-ccu.h>
> > @@ -11,6 +9,7 @@
> > #include <dt-bindings/reset/sun50i-h6-ccu.h>
> > #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> > #include <dt-bindings/reset/sun8i-de2.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> > / {
> > interrupt-parent = <&gic>;
> > @@ -26,6 +25,9 @@
> > device_type = "cpu";
> > reg = <0>;
> > enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + #cooling-cells = <2>;
> > };
> >
> > cpu1: cpu at 1 {
> > @@ -33,6 +35,9 @@
> > device_type = "cpu";
> > reg = <1>;
> > enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + #cooling-cells = <2>;
> > };
> >
> > cpu2: cpu at 2 {
> > @@ -40,6 +45,9 @@
> > device_type = "cpu";
> > reg = <2>;
> > enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + #cooling-cells = <2>;
> > };
> >
> > cpu3: cpu at 3 {
> > @@ -47,6 +55,9 @@
> > device_type = "cpu";
> > reg = <3>;
> > enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k
periods */
> > + #cooling-cells = <2>;
> > };
> > };
> >
> > @@ -56,14 +67,6 @@
> > status = "disabled";
> > };
> >
> > - iosc: internal-osc-clk {
> > - #clock-cells = <0>;
> > - compatible = "fixed-clock";
> > - clock-frequency = <16000000>;
> > - clock-accuracy = <300000000>;
> > - clock-output-names = "iosc";
> > - };
> > -
> > osc24M: osc24M_clk {
> > #clock-cells = <0>;
> > compatible = "fixed-clock";
> > @@ -71,11 +74,13 @@
> > clock-output-names = "osc24M";
> > };
> >
> > - osc32k: osc32k_clk {
> > - #clock-cells = <0>;
> > - compatible = "fixed-clock";
> > - clock-frequency = <32768>;
> > - clock-output-names = "osc32k";
> > + pmu {
> > + compatible = "arm,cortex-a53-pmu";
> > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> > };
> >
> > psci {
> > @@ -85,6 +90,7 @@
> >
> > timer {
> > compatible = "arm,armv8-timer";
> > + arm,no-tick-in-suspend;
> > interrupts = <GIC_PPI 13
> > (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>,
> > <GIC_PPI 14
> > @@ -130,6 +136,7 @@
> > clock-names = "bus",
> > "mod";
> > resets = <&display_clocks
RST_MIXER0>;
> > + iommus = <&iommu 0>;
> >
> > ports {
> > #address-cells = <1>;
> > @@ -155,6 +162,30 @@
> > resets = <&ccu RST_BUS_VE>;
> > interrupts = <GIC_SPI 89
IRQ_TYPE_LEVEL_HIGH>;
> > allwinner,sram = <&ve_sram 1>;
> > + iommus = <&iommu 3>;
> > + };
> > +
> > + gpu: gpu at 1800000 {
> > + compatible = "allwinner,sun50i-h6-mali",
> > + "arm,mali-t720";
> > + reg = <0x01800000 0x4000>;
> > + interrupts = <GIC_SPI 84
IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 85
IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 83
IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "job", "mmu", "gpu";
> > + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
> > + clock-names = "core", "bus";
> > + resets = <&ccu RST_BUS_GPU>;
> > + status = "disabled";
> > + };
> > +
> > + crypto: crypto at 1904000 {
> > + compatible = "allwinner,sun50i-h6-crypto";
> > + reg = <0x01904000 0x1000>;
> > + interrupts = <GIC_SPI 87
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>,
<&ccu CLK_MBUS_CE>;
> > + clock-names = "bus", "mod", "ram";
> > + resets = <&ccu RST_BUS_CE>;
> > };
> >
> > syscon: syscon at 3000000 {
> > @@ -197,7 +228,7 @@
> > ccu: clock at 3001000 {
> > compatible = "allwinner,sun50i-h6-ccu";
> > reg = <0x03001000 0x1000>;
> > - clocks = <&osc24M>, <&osc32k>, <&iosc>;
> > + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
> > clock-names = "hosc", "losc", "iosc";
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> > @@ -215,9 +246,29 @@
> > #dma-cells = <1>;
> > };
> >
> > - sid: sid at 3006000 {
> > + msgbox: mailbox at 3003000 {
> > + compatible = "allwinner,sun50i-h6-msgbox",
> > + "allwinner,sun6i-a31-
msgbox";
> > + reg = <0x03003000 0x1000>;
> > + clocks = <&ccu CLK_BUS_MSGBOX>;
> > + resets = <&ccu RST_BUS_MSGBOX>;
> > + interrupts = <GIC_SPI 44
IRQ_TYPE_LEVEL_HIGH>;
> > + #mbox-cells = <1>;
> > + };
> > +
> > + sid: efuse at 3006000 {
> > compatible = "allwinner,sun50i-h6-sid";
> > reg = <0x03006000 0x400>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + ths_calibration: thermal-sensor-
calibration at 14 {
> > + reg = <0x14 0x8>;
> > + };
> > +
> > + cpu_speed_grade: cpu-speed-grade at 1c {
> > + reg = <0x1c 0x4>;
> > + };
> > };
> >
> > watchdog: watchdog at 30090a0 {
> > @@ -225,10 +276,21 @@
> > "allwinner,sun6i-a31-wdt";
> > reg = <0x030090a0 0x20>;
> > interrupts = <GIC_SPI 50
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&osc24M>;
> > /* Broken on some H6 boards */
> > status = "disabled";
> > };
> >
> > + pwm: pwm at 300a000 {
> > + compatible = "allwinner,sun50i-h6-pwm";
> > + reg = <0x0300a000 0x400>;
> > + clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
> > + clock-names = "mod", "bus";
> > + resets = <&ccu RST_BUS_PWM>;
> > + #pwm-cells = <3>;
> > + status = "disabled";
> > + };
> > +
> > pio: pinctrl at 300b000 {
> > compatible = "allwinner,sun50i-h6-pinctrl";
> > reg = <0x0300b000 0x400>;
> > @@ -236,7 +298,7 @@
> > <GIC_SPI 53
IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 54
IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 59
IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&ccu CLK_APB1>, <&osc24M>,
<&osc32k>;
> > + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc
0>;
> > clock-names = "apb", "hosc", "losc";
> > gpio-controller;
> > #gpio-cells = <3>;
> > @@ -256,6 +318,21 @@
> > function = "hdmi";
> > };
> >
> > + i2c0_pins: i2c0-pins {
> > + pins = "PD25", "PD26";
> > + function = "i2c0";
> > + };
> > +
> > + i2c1_pins: i2c1-pins {
> > + pins = "PH5", "PH6";
> > + function = "i2c1";
> > + };
> > +
> > + i2c2_pins: i2c2-pins {
> > + pins = "PD23", "PD24";
> > + function = "i2c2";
> > + };
> > +
> > mmc0_pins: mmc0-pins {
> > pins = "PF0", "PF1", "PF2",
"PF3",
> > "PF4", "PF5";
> > @@ -264,10 +341,7 @@
> > bias-pull-up;
> > };
> >
> > - /*
> > - * /omit-if-no-ref/ isn't supported by U-
boot
> > - * keep this comment to avoid bad sync with
Linux
> > - */
> > + /omit-if-no-ref/
> > mmc1_pins: mmc1-pins {
> > pins = "PG0", "PG1", "PG2",
"PG3",
> > "PG4", "PG5";
> > @@ -285,10 +359,50 @@
> > bias-pull-up;
> > };
> >
> > + /omit-if-no-ref/
> > + spi0_pins: spi0-pins {
> > + pins = "PC0", "PC2", "PC3";
> > + function = "spi0";
> > + };
> > +
> > + /* pin shared with MMC2-CMD (eMMC) */
> > + /omit-if-no-ref/
> > + spi0_cs_pin: spi0-cs-pin {
> > + pins = "PC5";
> > + function = "spi0";
> > + };
> > +
> > + /omit-if-no-ref/
> > + spi1_pins: spi1-pins {
> > + pins = "PH4", "PH5", "PH6";
> > + function = "spi1";
> > + };
> > +
> > + /omit-if-no-ref/
> > + spi1_cs_pin: spi1-cs-pin {
> > + pins = "PH3";
> > + function = "spi1";
> > + };
> > +
> > + spdif_tx_pin: spdif-tx-pin {
> > + pins = "PH7";
> > + function = "spdif";
> > + };
> > +
> > uart0_ph_pins: uart0-ph-pins {
> > pins = "PH0", "PH1";
> > function = "uart0";
> > };
> > +
> > + uart1_pins: uart1-pins {
> > + pins = "PG6", "PG7";
> > + function = "uart1";
> > + };
> > +
> > + uart1_rts_cts_pins: uart1-rts-cts-pins {
> > + pins = "PG8", "PG9";
> > + function = "uart1";
> > + };
> > };
> >
> > gic: interrupt-controller at 3021000 {
> > @@ -302,6 +416,15 @@
> > #interrupt-cells = <3>;
> > };
> >
> > + iommu: iommu at 30f0000 {
> > + compatible = "allwinner,sun50i-h6-iommu";
> > + reg = <0x030f0000 0x10000>;
> > + interrupts = <GIC_SPI 57
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_IOMMU>;
> > + resets = <&ccu RST_BUS_IOMMU>;
> > + #iommu-cells = <1>;
> > + };
> > +
> > mmc0: mmc at 4020000 {
> > compatible = "allwinner,sun50i-h6-mmc",
> > "allwinner,sun50i-a64-mmc";
> > @@ -394,6 +517,78 @@
> > status = "disabled";
> > };
> >
> > + i2c0: i2c at 5002000 {
> > + compatible = "allwinner,sun50i-h6-i2c",
> > + "allwinner,sun6i-a31-i2c";
> > + reg = <0x05002000 0x400>;
> > + interrupts = <GIC_SPI 4
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_I2C0>;
> > + resets = <&ccu RST_BUS_I2C0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c0_pins>;
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + i2c1: i2c at 5002400 {
> > + compatible = "allwinner,sun50i-h6-i2c",
> > + "allwinner,sun6i-a31-i2c";
> > + reg = <0x05002400 0x400>;
> > + interrupts = <GIC_SPI 5
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_I2C1>;
> > + resets = <&ccu RST_BUS_I2C1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_pins>;
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + i2c2: i2c at 5002800 {
> > + compatible = "allwinner,sun50i-h6-i2c",
> > + "allwinner,sun6i-a31-i2c";
> > + reg = <0x05002800 0x400>;
> > + interrupts = <GIC_SPI 6
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_I2C2>;
> > + resets = <&ccu RST_BUS_I2C2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c2_pins>;
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + spi0: spi at 5010000 {
> > + compatible = "allwinner,sun50i-h6-spi",
> > + "allwinner,sun8i-h3-spi";
> > + reg = <0x05010000 0x1000>;
> > + interrupts = <GIC_SPI 10
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_SPI0>, <&ccu
CLK_SPI0>;
> > + clock-names = "ahb", "mod";
> > + dmas = <&dma 22>, <&dma 22>;
> > + dma-names = "rx", "tx";
> > + resets = <&ccu RST_BUS_SPI0>;
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > + spi1: spi at 5011000 {
> > + compatible = "allwinner,sun50i-h6-spi",
> > + "allwinner,sun8i-h3-spi";
> > + reg = <0x05011000 0x1000>;
> > + interrupts = <GIC_SPI 11
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_SPI1>, <&ccu
CLK_SPI1>;
> > + clock-names = "ahb", "mod";
> > + dmas = <&dma 23>, <&dma 23>;
> > + dma-names = "rx", "tx";
> > + resets = <&ccu RST_BUS_SPI1>;
> > + status = "disabled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > +
> > emac: ethernet at 5020000 {
> > compatible = "allwinner,sun50i-h6-emac",
> > "allwinner,sun50i-a64-emac";
> > @@ -414,6 +609,34 @@
> > };
> > };
> >
> > + i2s1: i2s at 5091000 {
> > + #sound-dai-cells = <0>;
> > + compatible = "allwinner,sun50i-h6-i2s";
> > + reg = <0x05091000 0x1000>;
> > + interrupts = <GIC_SPI 19
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_I2S1>, <&ccu
CLK_I2S1>;
> > + clock-names = "apb", "mod";
> > + dmas = <&dma 4>, <&dma 4>;
> > + resets = <&ccu RST_BUS_I2S1>;
> > + dma-names = "rx", "tx";
> > + status = "disabled";
> > + };
> > +
> > + spdif: spdif at 5093000 {
> > + #sound-dai-cells = <0>;
> > + compatible = "allwinner,sun50i-h6-spdif";
> > + reg = <0x05093000 0x400>;
> > + interrupts = <GIC_SPI 21
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu
CLK_SPDIF>;
> > + clock-names = "apb", "spdif";
> > + resets = <&ccu RST_BUS_SPDIF>;
> > + dmas = <&dma 2>;
> > + dma-names = "tx";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&spdif_tx_pin>;
> > + status = "disabled";
> > + };
> > +
> > usb2otg: usb at 5100000 {
> > compatible = "allwinner,sun50i-h6-musb",
> > "allwinner,sun8i-a33-musb";
> > @@ -470,6 +693,38 @@
> > status = "disabled";
> > };
> >
> > + dwc3: usb at 5200000 {
> > + compatible = "snps,dwc3";
> > + reg = <0x05200000 0x10000>;
> > + interrupts = <GIC_SPI 26
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_XHCI>,
> > + <&ccu CLK_BUS_XHCI>,
> > + <&rtc 0>;
> > + clock-names = "ref", "bus_early", "suspend";
> > + resets = <&ccu RST_BUS_XHCI>;
> > + /*
> > + * The datasheet of the chip doesn't declare
the
> > + * peripheral function, and there's no
boards known
> > + * to have a USB Type-B port routed to the
port.
> > + * In addition, no one has tested the
peripheral
> > + * function yet.
> > + * So set the dr_mode to "host" in the DTSI
file.
> > + */
> > + dr_mode = "host";
> > + phys = <&usb3phy>;
> > + phy-names = "usb3-phy";
> > + status = "disabled";
> > + };
> > +
> > + usb3phy: phy at 5210000 {
> > + compatible = "allwinner,sun50i-h6-usb3-phy";
> > + reg = <0x5210000 0x10000>;
> > + clocks = <&ccu CLK_USB_PHY1>;
> > + resets = <&ccu RST_USB_PHY1>;
> > + #phy-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > ehci3: usb at 5311000 {
> > compatible = "allwinner,sun50i-h6-ehci",
"generic-ehci";
> > reg = <0x05311000 0x100>;
> > @@ -480,6 +735,7 @@
> > resets = <&ccu RST_BUS_OHCI3>,
> > <&ccu RST_BUS_EHCI3>;
> > phys = <&usb2phy 3>;
> > + phy-names = "usb";
> > status = "disabled";
> > };
> >
> > @@ -491,6 +747,7 @@
> > <&ccu CLK_USB_OHCI3>;
> > resets = <&ccu RST_BUS_OHCI3>;
> > phys = <&usb2phy 3>;
> > + phy-names = "usb";
> > status = "disabled";
> > };
> >
> > @@ -507,7 +764,7 @@
> > resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu
RST_BUS_HDCP>;
> > reset-names = "ctrl", "hdcp";
> > phys = <&hdmi_phy>;
> > - phy-names = "hdmi-phy";
> > + phy-names = "phy";
> > pinctrl-names = "default";
> > pinctrl-0 = <&hdmi_pins>;
> > status = "disabled";
> > @@ -549,7 +806,6 @@
> > "tcon-tv0";
> > clock-output-names = "tcon-top-tv0";
> > resets = <&ccu RST_BUS_TCON_TOP>;
> > - reset-names = "rst";
> > #clock-cells = <1>;
> >
> > ports {
> > @@ -636,10 +892,19 @@
> > };
> > };
> >
> > + rtc: rtc at 7000000 {
> > + compatible = "allwinner,sun50i-h6-rtc";
> > + reg = <0x07000000 0x400>;
> > + interrupts = <GIC_SPI 101
IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 102
IRQ_TYPE_LEVEL_HIGH>;
> > + clock-output-names = "osc32k", "osc32k-out",
"iosc";
> > + #clock-cells = <1>;
> > + };
> > +
> > r_ccu: clock at 7010000 {
> > compatible = "allwinner,sun50i-h6-r-ccu";
> > reg = <0x07010000 0x400>;
> > - clocks = <&osc24M>, <&osc32k>, <&iosc>,
> > + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
> > <&ccu CLK_PLL_PERIPH0>;
> > clock-names = "hosc", "losc", "iosc", "pll-
periph";
> > #clock-cells = <1>;
> > @@ -651,6 +916,7 @@
> > "allwinner,sun6i-a31-wdt";
> > reg = <0x07020400 0x20>;
> > interrupts = <GIC_SPI 103
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&osc24M>;
> > };
> >
> > r_intc: interrupt-controller at 7021000 {
> > @@ -667,7 +933,7 @@
> > reg = <0x07022000 0x400>;
> > interrupts = <GIC_SPI 105
IRQ_TYPE_LEVEL_HIGH>,
> > <GIC_SPI 111
IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
<&osc32k>;
> > + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
<&rtc 0>;
> > clock-names = "apb", "hosc", "losc";
> > gpio-controller;
> > #gpio-cells = <3>;
> > @@ -678,10 +944,30 @@
> > pins = "PL0", "PL1";
> > function = "s_i2c";
> > };
> > +
> > + r_ir_rx_pin: r-ir-rx-pin {
> > + pins = "PL9";
> > + function = "s_cir_rx";
> > + };
> > + };
> > +
> > + r_ir: ir at 7040000 {
> > + compatible = "allwinner,sun50i-
h6-ir",
> > + "allwinner,sun6i-
a31-ir";
> > + reg = <0x07040000 0x400>;
> > + interrupts = <GIC_SPI 109
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&r_ccu CLK_R_APB1_IR>,
> > + <&r_ccu CLK_IR>;
> > + clock-names = "apb", "ir";
> > + resets = <&r_ccu RST_R_APB1_IR>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&r_ir_rx_pin>;
> > + status = "disabled";
> > };
> >
> > r_i2c: i2c at 7081400 {
> > - compatible = "allwinner,sun6i-a31-i2c";
> > + compatible = "allwinner,sun50i-h6-i2c",
> > + "allwinner,sun6i-a31-i2c";
> > reg = <0x07081400 0x400>;
> > interrupts = <GIC_SPI 107
IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&r_ccu CLK_R_APB2_I2C>;
> > @@ -692,5 +978,55 @@
> > #address-cells = <1>;
> > #size-cells = <0>;
> > };
> > +
> > + ths: thermal-sensor at 5070400 {
> > + compatible = "allwinner,sun50i-h6-ths";
> > + reg = <0x05070400 0x100>;
> > + interrupts = <GIC_SPI 15
IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_THS>;
> > + clock-names = "bus";
> > + resets = <&ccu RST_BUS_THS>;
> > + nvmem-cells = <&ths_calibration>;
> > + nvmem-cell-names = "calibration";
> > + #thermal-sensor-cells = <1>;
> > + };
> > + };
> > +
> > + thermal-zones {
> > + cpu-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > + thermal-sensors = <&ths 0>;
> > +
> > + trips {
> > + cpu_alert: cpu-alert {
> > + temperature = <85000>;
> > + hysteresis = <2000>;
> > + type = "passive";
> > + };
> > +
> > + cpu-crit {
> > + temperature =
<100000>;
> > + hysteresis = <0>;
> > + type = "critical";
> > + };
> > + };
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_alert>;
> > + cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > + };
> > + };
> > + };
> > +
> > + gpu-thermal {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > + thermal-sensors = <&ths 1>;
> > + };
> > };
> > };
> >
>
>
More information about the U-Boot
mailing list