[PATCH v2 00/34] Sama7g5 Evaluation Kit support

[Eugen.Hristev at microchip.com]

On 05.12.2020 12:02, Eugen Hristev wrote:
> Hello,
> 
> This series adds support for sama7g5 SoC DT and the sama7g5ek board.
> I kept the original incremental development for this board, with each
> commit's author and designated change, for traceability and for easier
> reviewing.
> 
> The series starts from a basic devicetree and ends with a fully functional
> board including SD-Card/MMC, i2c eeproms, ethernet.
> 
> Thanks,
> Eugen
> 
> Changes in v2:
> - fixed compatible for i2c eeprom, mac was not read correctly in latest u-boot version
> - fixed some checkpatch warnings and some spacing
> 
> Claudiu Beznea (20):
>    board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
>    configs: sama7g5ek: set malloc pool to 68K
>    configs: sama7g5ek: enable pll driver
>    ARM: dts: sama7g5: move clock frequencies for xtals in board file
>    ARM: dts: sama7g5: add slow rc and main rc oscillators
>    ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
>    ARM: dts: sama7g5: add slow clock bindings
>    ARM: dts: sama7g5: add PMC bindings
>    ARM: dts: sama7g5: switch to PMC bindings
>    configs: sama7g5: enable CONFIG_CPU
>    ARM: dts: sama7g5: add CPU bindings
>    configs: sama7g5: use PIT64B
>    ARM: dts: sama7g5: enable autoboot
>    ARM: dts: sama7g5: add pit64b support
>    configs: sama7g5ek: enable mii command
>    ARM: dts: sama7g5: add GMAC0
>    ARM: dts: sama7g5: add GMAC1
>    board: atmel: sama7g5ek: increase arp timeout and retry count
>    configs: sama7g5ek: enable support for KSZ9131
>    configs: sama7g5ek: enable CCF
> 
> Eugen Hristev (13):
>    ARM: dts: sama7g5: add initial DT for sama7g5 SoC
>    board: atmel: sama7g5ek: add initial support for sama7g5ek
>    ARM: dts: at91: sama7g5: add pinctrl node
>    ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
>    ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
>    ARM: dts: at91: sama7g5: add node for sdmmc0
>    ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
>    board: atmel: sama7g5ek: clean-up header bootcommand
>    configs: sama7g5: add mmc config for sdmmc0
>    ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
>    ARM: dts: sama7g5ek: add i2c1 bus and eeproms
>    board: atmel: sama7g5ek: add support for MAC address retreival
>    configs: sama7g5ek: add i2c and eeprom
> 
> Nicolas Ferre (1):
>    ARM: dts: sama7g5ek: fix TXC pin configuration
> 
>   arch/arm/dts/Makefile              |   3 +
>   arch/arm/dts/sama7g5.dtsi          | 170 ++++++++++++++++++++++++
>   arch/arm/dts/sama7g5ek-u-boot.dtsi |  65 ++++++++++
>   arch/arm/dts/sama7g5ek.dts         | 202 +++++++++++++++++++++++++++++
>   arch/arm/mach-at91/Kconfig         |   8 ++
>   board/atmel/sama7g5ek/Kconfig      |  15 +++
>   board/atmel/sama7g5ek/MAINTAINERS  |   8 ++
>   board/atmel/sama7g5ek/Makefile     |   7 +
>   board/atmel/sama7g5ek/sama7g5ek.c  |  76 +++++++++++
>   configs/sama7g5ek_mmc1_defconfig   |  70 ++++++++++
>   configs/sama7g5ek_mmc_defconfig    |  70 ++++++++++
>   include/configs/sama7g5ek.h        |  45 +++++++
>   12 files changed, 739 insertions(+)
>   create mode 100644 arch/arm/dts/sama7g5.dtsi
>   create mode 100644 arch/arm/dts/sama7g5ek-u-boot.dtsi
>   create mode 100644 arch/arm/dts/sama7g5ek.dts
>   create mode 100644 board/atmel/sama7g5ek/Kconfig
>   create mode 100644 board/atmel/sama7g5ek/MAINTAINERS
>   create mode 100644 board/atmel/sama7g5ek/Makefile
>   create mode 100644 board/atmel/sama7g5ek/sama7g5ek.c
>   create mode 100644 configs/sama7g5ek_mmc1_defconfig
>   create mode 100644 configs/sama7g5ek_mmc_defconfig
>   create mode 100644 include/configs/sama7g5ek.h
> 

Applied to u-boot-atmel/master