[v2 2/6] arm: socfpga: soc64: Support Vendor Authorized Boot (VAB)

[Lim, Elly Siew Chin]

Hi Simon,

> -----Original Message-----
> From: Simon Glass <sjg at chromium.org>
> Sent: Thursday, January 7, 2021 8:36 PM
> To: Lim, Elly Siew Chin <elly.siew.chin.lim at intel.com>
> Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Marek Vasut
> <marex at denx.de>; Tan, Ley Foon <ley.foon.tan at intel.com>; See, Chin Liang
> <chin.liang.see at intel.com>; Simon Goldschmidt
> <simon.k.r.goldschmidt at gmail.com>; Chee, Tien Fong
> <tien.fong.chee at intel.com>; Westergreen, Dalon
> <dalon.westergreen at intel.com>; Gan, Yau Wai <yau.wai.gan at intel.com>
> Subject: Re: [v2 2/6] arm: socfpga: soc64: Support Vendor Authorized Boot
> (VAB)
> 
> On Thu, 7 Jan 2021 at 03:03, Siew Chin Lim <elly.siew.chin.lim at intel.com>
> wrote:
> >
> > Vendor Authorized Boot is a security feature for authenticating the
> > images such as U-Boot, ARM trusted Firmware, Linux kernel, device tree
> > blob and etc loaded from FIT. After those images are loaded from FIT,
> > the VAB certificate and signature block appended at the end of each
> > image are sent to Secure Device Manager (SDM) for authentication.
> > U-Boot will validate the SHA384 of the image against the SHA384 hash
> > stored in the VAB certificate before sending the image to SDM for
> > authentication.
> >
> > Signed-off-by: Siew Chin Lim <elly.siew.chin.lim at intel.com>
> >
> > ---
> > v2
> > ---
> > - Renamed SECURE_VAB_AUTH* to SOCFPGA_SECURE_VAB_AUTH*
> > - Changes in secure_vab.c
> >   - Changed to use SZ_1K for 1024
> >   - Updated comment in secure_vab.c of "... the certificate for T"
> >   - The code will report error before end of the function if reach
> >     maximum retry.
> >   - In board_prep_linux function, only execute linux_qspi_enable
> >     command if it exists in enviroment variable. It is optional.
> > ---
> >  arch/arm/mach-socfpga/Kconfig                    |  15 ++
> >  arch/arm/mach-socfpga/Makefile                   |   2 +
> >  arch/arm/mach-socfpga/include/mach/mailbox_s10.h |   1 +
> >  arch/arm/mach-socfpga/include/mach/secure_vab.h  |  63 ++++++++
> >  arch/arm/mach-socfpga/secure_vab.c               | 193
> +++++++++++++++++++++++
> >  common/Kconfig.boot                              |   2 +-
> >  6 files changed, 275 insertions(+), 1 deletion(-)  create mode 100644
> > arch/arm/mach-socfpga/include/mach/secure_vab.h
> >  create mode 100644 arch/arm/mach-socfpga/secure_vab.c
> 
> I think this could use a few more function comments. Also try to use
> if() instead of #if

Noted. I will change #if in *.c to " if (IS_ENABLED(CONFIG...))".

Besides, can you please help to elaborate more about  "I think this could use a few more function comments."?

Thanks,
Siew Chin

> 
> Regards,
> Simon