[PATCH v6 3/3] arm64: dts: sun50i: Add support for Orange Pi 3
Jernej Škrabec
jernej.skrabec at siol.net
Sun Jan 10 20:31:33 CET 2021
Dne nedelja, 10. januar 2021 ob 20:29:39 CET je Jernej Skrabec napisal(a):
> From: Andre Heider <a.heider at gmail.com>
>
> dts file is taken from Linux 5.11-rc1 tag.
>
> The Bluetooth controller of this device ships with a default address,
> use the new CONFIG_FIXUP_BDADDR option to fix it up.
>
> akonadi:?collection=30&name=INBOX
Andre,
This ^ should be your tag. Can you fix it at committing?
Best regard,
Jernej
> Acked-by: Maxime Ripard <mripard at kernel.org>
> Signed-off-by: Andre Heider <a.heider at gmail.com>
> [Updated OrangePi 3 DT, rebase and config update]
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h6-orangepi-3.dts | 345 ++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 5 +
> configs/orangepi_3_defconfig | 12 +
> 4 files changed, 363 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts
> create mode 100644 configs/orangepi_3_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index e00aed1ec207..607571d04b25 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -605,6 +605,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-orangepi-zero-plus2.dtb
> dtb-$(CONFIG_MACH_SUN50I_H6) += \
> sun50i-h6-beelink-gs1.dtb \
> + sun50i-h6-orangepi-3.dtb \
> sun50i-h6-orangepi-lite2.dtb \
> sun50i-h6-orangepi-one-plus.dtb \
> sun50i-h6-pine-h64.dtb \
> diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-
orangepi-3.dts
> new file mode 100644
> index 000000000000..15c9dd8c4479
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (C) 2019 Ondřej Jirman <megous at megous.com>
> +
> +/dts-v1/;
> +
> +#include "sun50i-h6.dtsi"
> +#include "sun50i-h6-cpu-opp.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "OrangePi 3";
> + compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + connector {
> + compatible = "hdmi-connector";
> + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + ext_osc32k: ext_osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "ext_osc32k";
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + power {
> + label = "orangepi:red:power";
> + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4
*/
> + default-state = "on";
> + };
> +
> + status {
> + label = "orangepi:green:status";
> + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7
*/
> + };
> + };
> +
> + reg_vcc5v: vcc5v {
> + /* board wide 5V supply directly from the DC jack */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + reg_vcc33_wifi: vcc33-wifi {
> + /* Always on 3.3V regulator for WiFi and BT */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc33-wifi";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + vin-supply = <®_vcc5v>;
> + };
> +
> + reg_vcc_wifi_io: vcc-wifi-io {
> + /* Always on 1.8V/300mA regulator for WiFi and BT IO */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-wifi-io";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + vin-supply = <®_vcc33_wifi>;
> + };
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rtc 1>;
> + clock-names = "ext_clock";
> + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
> + post-power-on-delay-ms = <200>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <®_dcdca>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&dwc3 {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci3 {
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <®_dcdcc>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_cldo1>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + vmmc-supply = <®_vcc33_wifi>;
> + vqmmc-supply = <®_vcc_wifi_io>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + brcm: sdio-wifi at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&r_pio>;
> + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
> + interrupt-names = "host-wake";
> + };
> +};
> +
> +&mmc2 {
> + vmmc-supply = <®_cldo1>;
> + vqmmc-supply = <®_bldo2>;
> + cap-mmc-hw-reset;
> + non-removable;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci3 {
> + status = "okay";
> +};
> +
> +&pio {
> + vcc-pc-supply = <®_bldo2>;
> + vcc-pd-supply = <®_cldo1>;
> + vcc-pg-supply = <®_vcc_wifi_io>;
> +};
> +
> +&r_i2c {
> + status = "okay";
> +
> + axp805: pmic at 36 {
> + compatible = "x-powers,axp805", "x-powers,axp806";
> + reg = <0x36>;
> + interrupt-parent = <&r_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + x-powers,self-working-mode;
> + vina-supply = <®_vcc5v>;
> + vinb-supply = <®_vcc5v>;
> + vinc-supply = <®_vcc5v>;
> + vind-supply = <®_vcc5v>;
> + vine-supply = <®_vcc5v>;
> + aldoin-supply = <®_vcc5v>;
> + bldoin-supply = <®_vcc5v>;
> + cldoin-supply = <®_vcc5v>;
> +
> + regulators {
> + reg_aldo1: aldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc-pl-led-ir";
> + };
> +
> + reg_aldo2: aldo2 {
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-audio-tv-
ephy-mac";
> + };
> +
> + /* ALDO3 is shorted to CLDO1 */
> + reg_aldo3: aldo3 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-io-pd-
emmc-sd-usb-uart-1";
> + };
> +
> + reg_bldo1: bldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc18-dram-bias-
pll";
> + };
> +
> + reg_bldo2: bldo2 {
> + regulator-always-on;
> + regulator-min-microvolt =
<1800000>;
> + regulator-max-microvolt =
<1800000>;
> + regulator-name = "vcc-efuse-pcie-
hdmi-pc";
> + };
> +
> + bldo3 {
> + /* unused */
> + };
> +
> + bldo4 {
> + /* unused */
> + };
> +
> + reg_cldo1: cldo1 {
> + regulator-always-on;
> + regulator-min-microvolt =
<3300000>;
> + regulator-max-microvolt =
<3300000>;
> + regulator-name = "vcc33-io-pd-
emmc-sd-usb-uart-2";
> + };
> +
> + cldo2 {
> + /* unused */
> + };
> +
> + cldo3 {
> + /* unused */
> + };
> +
> + reg_dcdca: dcdca {
> + regulator-always-on;
> + regulator-min-microvolt =
<800000>;
> + regulator-max-microvolt =
<1160000>;
> + regulator-ramp-delay = <2500>;
> + regulator-name = "vdd-cpu";
> + };
> +
> + reg_dcdcc: dcdcc {
> + regulator-enable-ramp-delay =
<32000>;
> + regulator-min-microvolt =
<810000>;
> + regulator-max-microvolt =
<1080000>;
> + regulator-ramp-delay = <2500>;
> + regulator-name = "vdd-gpu";
> + };
> +
> + reg_dcdcd: dcdcd {
> + regulator-always-on;
> + regulator-min-microvolt =
<960000>;
> + regulator-max-microvolt =
<960000>;
> + regulator-name = "vdd-sys";
> + };
> +
> + reg_dcdce: dcdce {
> + regulator-always-on;
> + regulator-min-microvolt =
<1200000>;
> + regulator-max-microvolt =
<1200000>;
> + regulator-name = "vcc-dram";
> + };
> +
> + sw {
> + /* unused */
> + };
> + };
> + };
> +};
> +
> +&r_ir {
> + status = "okay";
> +};
> +
> +&rtc {
> + clocks = <&ext_osc32k>;
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
> +/* There's the BT part of the AP6256 connected to that UART */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm4345c5";
> + clocks = <&rtc 1>;
> + clock-names = "lpo";
> + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /*
PM2 */
> + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /*
PM1 */
> + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4
*/
> + max-speed = <1500000>;
> + };
> +};
> +
> +&usb2otg {
> + /*
> + * This board doesn't have a controllable VBUS even though it
> + * does have an ID pin. Using it as anything but a USB host is
> + * unsafe.
> + */
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb2phy {
> + usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
> + usb0_vbus-supply = <®_vcc5v>;
> + usb3_vbus-supply = <®_vcc5v>;
> + status = "okay";
> +};
> +
> +&usb3phy {
> + status = "okay";
> +};
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 1b37a9899edd..95b4df83e0a9 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -385,6 +385,11 @@ M: Icenowy Zheng <icenowy at aosc.io>
> S: Maintained
> F: configs/teres_i_defconfig
>
> +ORANGEPI 3 BOARD
> +M: Andre Heider <a.heider at gmail.com>
> +S: Maintained
> +F: configs/orangepi_3_defconfig
> +
> ORANGEPI LITE2 BOARD
> M: Jagan Teki <jagan at amarulasolutions.com>
> S: Maintained
> diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
> new file mode 100644
> index 000000000000..82b9815205ef
> --- /dev/null
> +++ b/configs/orangepi_3_defconfig
> @@ -0,0 +1,12 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I_H6=y
> +CONFIG_SUNXI_DRAM_H6_LPDDR3=y
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y
> --
> 2.30.0
>
>
More information about the U-Boot
mailing list