[PATCH] arm: dts: stm32mp15: alignment with v5.11-rc2

[Marek Vasut]

On 1/11/21 12:33 PM, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.11-rc2
> - fix DCMI DMA features on stm32mp15 family
> - Add alternate pinmux for FMC EBI bus
> - Harmonize EHCI/OHCI DT nodes name on stm32mp15
> - update sdmmc IP version for STM32MP15
> - Add LP timer irqs on stm32mp151
> - Add LP timer wakeup-source on stm32mp151
> - enable HASH by default on stm32mp15
> - enable CRC1 by default on stm32mp15
> - enable CRYP by default on stm32mp15
> - set bus-type in DCMI endpoint for stm32mp157c-ev1 board
> - reorder spi4 within stm32mp15-pinctrl
> - add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
> - fix mdma1 clients channel priority level on stm32mp151
> - fix dmamux reg property on stm32mp151
> - adjust USB OTG gadget fifo sizes in stm32mp151
> - update stm32mp151 for remote proc synchronization support
> - support child mfd cells for the stm32mp1 TAMP syscon

Are you completely sure the dhcom based boards generate the same DT 
after the sync ?

I would rather prefer sync with Linux 5.10 (LTS), or is that not an 
option due to some extra DT patches ?

Either way, if you have an upstream queue for this DT sync somewhere, 
please give me a link, I plan to sync the dhcom boards after 2021.01 is 
out, so I would build on top of that.