[PATCH] board: amlogic: vim3: setup ethernet mac from efuse

[Neil Armstrong]

Hi Artem,

On 11/01/2021 12:19, Artem Lapkin wrote:
> Add the board specific code for reading built-in ethernet MAC address from efuse
> 
> NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset
> 
> if mac from efuse not valid we use meson_generate_serial_ethaddr
> 
> NOTE: remake odroid-n2.c variant from Neil Armstrong <narmstrong at baylibre.com>

So the patch from Marek (https://patchwork.ozlabs.org/project/uboot/patch/20201217072642.1319-1-m.szyprowski@samsung.com/) doesn't work ?
Are you sure the MAC is stored in ASCII like Odroid-N2 ?

Please look at my u-boot-amlogic-next tree I will push this week for the next u-boot release:
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic/-/tree/u-boot-amlogic-next

Neil

> 
> Signed-off-by: Artem Lapkin <art at khadas.com>
> ---
>  board/amlogic/vim3/vim3.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
> index 09ef39ff30..c5d19cc17b 100644
> --- a/board/amlogic/vim3/vim3.c
> +++ b/board/amlogic/vim3/vim3.c
> @@ -11,9 +11,14 @@
>  #include <net.h>
>  #include <asm/io.h>
>  #include <asm/arch/eth.h>
> +#include <asm/arch/sm.h>
>  #include <i2c.h>
>  #include "khadas-mcu.h"
>  
> +#define EFUSE_MAC_OFFSET	0
> +#define EFUSE_MAC_SIZE		12
> +#define MAC_ADDR_LEN		6
> +
>  /*
>   * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
>   * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
> @@ -131,7 +136,37 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
>  
>  int misc_init_r(void)
>  {
> +	u8 mac_addr[MAC_ADDR_LEN];
> +	char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
> +	ssize_t len;
> +
>  	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
>  
> +	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
> +
> +		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, efuse_mac_addr, EFUSE_MAC_SIZE);
> +		if (len != EFUSE_MAC_SIZE)
> +			return 0;
> +
> +		/* MAC is stored in ASCII format, 1bytes = 2characters */
> +		for (int i = 0; i < 6; i++) {
> +			tmp[0] = efuse_mac_addr[i * 2];
> +			tmp[1] = efuse_mac_addr[i * 2 + 1];
> +			tmp[2] = '\0';
> +			mac_addr[i] = simple_strtoul(tmp, NULL, 16);
> +		}
> +
> +		if (is_valid_ethaddr(mac_addr))
> +			eth_env_set_enetaddr("ethaddr", mac_addr);
> +		else
> +			meson_generate_serial_ethaddr();
> +
> +		eth_env_get_enetaddr("ethaddr", mac_addr);
> +		printf("[i] setup onboard mac %02X:%02X:%02X:%02X:%02X:%02X\n",
> +			mac_addr[0],mac_addr[1],mac_addr[2],
> +			mac_addr[3],mac_addr[4],mac_addr[5]);
> +
> +	}
> +
>  	return 0;
>  }
>