[PATCH v2 05/21] sunxi: prcm: Add memory map for H6 like SoCs
Jernej Skrabec
jernej.skrabec at siol.net
Mon Jan 11 21:11:37 CET 2021
There was no need to have prcm definitions for H6 and similar SoCs till
now. However, support R_I2C will be needed soon in SPL.
Move old definitions to prcm_sun6i.h and add new ones in prcm_sun50i.h.
One of those files will be selected in common prcm.h based on defined
macros.
This commit doesn't do any functional change.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
arch/arm/include/asm/arch-sunxi/prcm.h | 249 +-----------------
arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 47 ++++
arch/arm/include/asm/arch-sunxi/prcm_sun6i.h | 247 +++++++++++++++++
3 files changed, 304 insertions(+), 239 deletions(-)
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
index 767d1ff98d74..5106076f5e91 100644
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -1,247 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Sunxi A31 Power Management Unit register definition.
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
*
- * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
- * http://linux-sunxi.org
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing at allwinnertech.com>
- * Tom Cubie <tangliang at allwinnertech.com>
+ * Sunxi platform prcm register definition.
*/
#ifndef _SUNXI_PRCM_H
#define _SUNXI_PRCM_H
-#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
-#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
-#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
-#define PRCM_CPUS_CFG_PRE_DIV(n) \
- __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
-#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
-#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
-#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
-#define PRCM_CPUS_CFG_POST_DIV(n) \
- __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
-#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
-#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
-#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
-#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
-#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
-#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
-#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
- __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
-#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
- __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
-#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
- __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
-#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
- __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
-
-#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
-#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
-#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
-#define PRCM_APB0_RATIO_DIV(n) \
- __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
-
-#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
-#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
-
-#define PRCM_APB0_GATE_PIO (0x1 << 0)
-#define PRCM_APB0_GATE_IR (0x1 << 1)
-#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
-#define PRCM_APB0_GATE_P2WI (0x1 << 3) /* sun6i */
-#define PRCM_APB0_GATE_RSB (0x1 << 3) /* sun8i */
-#define PRCM_APB0_GATE_UART (0x1 << 4)
-#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
-#define PRCM_APB0_GATE_I2C (0x1 << 6)
-
-#define PRCM_APB0_RESET_PIO (0x1 << 0)
-#define PRCM_APB0_RESET_IR (0x1 << 1)
-#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
-#define PRCM_APB0_RESET_P2WI (0x1 << 3)
-#define PRCM_APB0_RESET_UART (0x1 << 4)
-#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
-#define PRCM_APB0_RESET_I2C (0x1 << 6)
-
-#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
-#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
-#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
-#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
- __PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
-#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
-#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
-#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
-#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
-#define PRCM_PLL_CTRL_USB_CLK_0 \
- __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
-#define PRCM_PLL_CTRL_USB_CLK_1 \
- __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
-#define PRCM_PLL_CTRL_USB_CLK_2 \
- __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
-#define PRCM_PLL_CTRL_USB_CLK_3 \
- __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
-#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
-#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
- __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
-#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
- __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
-#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
-#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
- __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
-#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
-#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
-#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
-#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
-#define PRCM_PLL_CTRL_HOSC_CLK_0 \
- __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
-#define PRCM_PLL_CTRL_HOSC_CLK_1 \
- __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
-#define PRCM_PLL_CTRL_HOSC_CLK_2 \
- __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
-#define PRCM_PLL_CTRL_HOSC_CLK_3 \
- __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
-#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
-#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
-#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
-#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
-#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
-#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
-#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
-#define PRCM_PLL_CTRL_LDO_OUT_MASK \
- __PRCM_PLL_CTRL_LDO_OUT(0x7)
-/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
-#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
-#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
-#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
-#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
-
-#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
-
-#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
-#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
-#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
-#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
-#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
-#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
-#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
-#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
-#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
-#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
-#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
-#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
-#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
-#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
-#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
-
-#define PRCM_APB0_RESET_PIO (0x1 << 0)
-#define PRCM_APB0_RESET_IR (0x1 << 1)
-#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
-#define PRCM_APB0_RESET_P2WI (0x1 << 3)
-#define PRCM_APB0_RESET_UART (0x1 << 4)
-#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
-#define PRCM_APB0_RESET_I2C (0x1 << 6)
-
-#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
-#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
-#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
-#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
-#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
-#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
-#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
-#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
-#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
-#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
-#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
-#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
-#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
-#define __PRCM_CLK_OUTD_SRC_ERR 0x3
-#define PRCM_CLK_OUTD_SRC_LOSC2 \
-#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
-#define PRCM_CLK_OUTD_SRC_LOSC \
-#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
-#define PRCM_CLK_OUTD_SRC_HOSC \
-#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
-#define PRCM_CLK_OUTD_SRC_ERR \
-#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
-#define PRCM_CLK_OUTD_EN (0x1 << 31)
-
-#define PRCM_CPU0_PWROFF (0x1 << 0)
-#define PRCM_CPU1_PWROFF (0x1 << 1)
-#define PRCM_CPU2_PWROFF (0x1 << 2)
-#define PRCM_CPU3_PWROFF (0x1 << 3)
-#define PRCM_CPU_ALL_PWROFF (0xf << 0)
-
-#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
-#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
-#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
-#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
-
-#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
-
-#define PRCM_VDD_SYS_RESET (0x1 << 0)
-
-#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
-#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
-
-#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
-#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
-
-#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
-#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
-
-#define PRCM_SEC_SWITCH_APB0_CLK_NONSEC (0x1 << 0)
-#define PRCM_SEC_SWITCH_PLL_CFG_NONSEC (0x1 << 1)
-#define PRCM_SEC_SWITCH_PWR_GATE_NONSEC (0x1 << 2)
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-
-struct sunxi_prcm_reg {
- u32 cpus_cfg; /* 0x000 */
- u8 res0[0x8]; /* 0x004 */
- u32 apb0_ratio; /* 0x00c */
- u32 cpu0_cfg; /* 0x010 */
- u32 cpu1_cfg; /* 0x014 */
- u32 cpu2_cfg; /* 0x018 */
- u32 cpu3_cfg; /* 0x01c */
- u8 res1[0x8]; /* 0x020 */
- u32 apb0_gate; /* 0x028 */
- u8 res2[0x14]; /* 0x02c */
- u32 pll_ctrl0; /* 0x040 */
- u32 pll_ctrl1; /* 0x044 */
- u8 res3[0x8]; /* 0x048 */
- u32 clk_1wire; /* 0x050 */
- u32 clk_ir; /* 0x054 */
- u8 res4[0x58]; /* 0x058 */
- u32 apb0_reset; /* 0x0b0 */
- u8 res5[0x3c]; /* 0x0b4 */
- u32 clk_outd; /* 0x0f0 */
- u8 res6[0xc]; /* 0x0f4 */
- u32 cpu_pwroff; /* 0x100 */
- u8 res7[0xc]; /* 0x104 */
- u32 vdd_sys_pwroff; /* 0x110 */
- u8 res8[0x4]; /* 0x114 */
- u32 gpu_pwroff; /* 0x118 */
- u8 res9[0x4]; /* 0x11c */
- u32 vdd_pwr_reset; /* 0x120 */
- u8 res10[0x1c]; /* 0x124 */
- u32 cpu_pwr_clamp[4]; /* 0x140 but first one is actually unused */
- u8 res11[0x30]; /* 0x150 */
- u32 dram_pwr; /* 0x180 */
- u8 res12[0xc]; /* 0x184 */
- u32 dram_tst; /* 0x190 */
- u8 res13[0x3c]; /* 0x194 */
- u32 prcm_sec_switch; /* 0x1d0 */
-};
-
-void prcm_apb0_enable(u32 flags);
-void prcm_apb0_disable(u32 flags);
-
-#endif /* __ASSEMBLY__ */
-#endif /* _PRCM_H */
+/* prcm regs definition */
+#if defined(CONFIG_SUN50I_GEN_H6)
+#include <asm/arch/prcm_sun50i.h>
+#else
+#include <asm/arch/prcm_sun6i.h>
+#endif
+
+#endif /* _SUNXI_PRCM_H */
diff --git a/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h b/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
new file mode 100644
index 000000000000..5f636e83845a
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/prcm_sun50i.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi H6 Power Management Unit register definition.
+ *
+ * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
+ */
+
+#ifndef _SUN50I_PRCM_H
+#define _SUN50I_PRCM_H
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
+struct sunxi_prcm_reg {
+ u32 cpus_cfg; /* 0x000 */
+ u8 res0[0x8]; /* 0x004 */
+ u32 apbs1_cfg; /* 0x00c */
+ u32 apbs2_cfg; /* 0x010 */
+ u8 res1[0x108]; /* 0x014 */
+ u32 tmr_gate_reset; /* 0x11c */
+ u8 res2[0xc]; /* 0x120 */
+ u32 twd_gate_reset; /* 0x12c */
+ u8 res3[0xc]; /* 0x130 */
+ u32 pwm_gate_reset; /* 0x13c */
+ u8 res4[0x4c]; /* 0x140 */
+ u32 uart_gate_reset; /* 0x18c */
+ u8 res5[0xc]; /* 0x190 */
+ u32 twi_gate_reset; /* 0x19c */
+ u8 res6[0x1c]; /* 0x1a0 */
+ u32 rsb_gate_reset; /* 0x1bc */
+ u32 cir_cfg; /* 0x1c0 */
+ u8 res7[0x8]; /* 0x1c4 */
+ u32 cir_gate_reset; /* 0x1cc */
+ u8 res8[0x10]; /* 0x1d0 */
+ u32 w1_cfg; /* 0x1e0 */
+ u8 res9[0x8]; /* 0x1e4 */
+ u32 w1_gate_reset; /* 0x1ec */
+ u8 res10[0x1c]; /* 0x1f0 */
+ u32 rtc_gate_reset; /* 0x20c */
+};
+check_member(sunxi_prcm_reg, rtc_gate_reset, 0x20c);
+
+#define PRCM_TWI_GATE (1 << 0)
+#define PRCM_TWI_RESET (1 << 16)
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
diff --git a/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h b/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
new file mode 100644
index 000000000000..ab664e80bbe8
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Sunxi A31 Power Management Unit register definition.
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
+ * http://linux-sunxi.org
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing at allwinnertech.com>
+ * Tom Cubie <tangliang at allwinnertech.com>
+ */
+
+#ifndef _SUN6I_PRCM_H
+#define _SUN6I_PRCM_H
+
+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
+#define PRCM_CPUS_CFG_PRE_DIV(n) \
+ __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
+#define PRCM_CPUS_CFG_POST_DIV(n) \
+ __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
+
+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
+#define PRCM_APB0_RATIO_DIV(n) \
+ __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
+
+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
+
+#define PRCM_APB0_GATE_PIO (0x1 << 0)
+#define PRCM_APB0_GATE_IR (0x1 << 1)
+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
+#define PRCM_APB0_GATE_P2WI (0x1 << 3) /* sun6i */
+#define PRCM_APB0_GATE_RSB (0x1 << 3) /* sun8i */
+#define PRCM_APB0_GATE_UART (0x1 << 4)
+#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
+#define PRCM_APB0_GATE_I2C (0x1 << 6)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
+#define PRCM_PLL_CTRL_USB_CLK_0 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
+#define PRCM_PLL_CTRL_USB_CLK_1 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
+#define PRCM_PLL_CTRL_USB_CLK_2 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
+#define PRCM_PLL_CTRL_USB_CLK_3 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
+#define PRCM_PLL_CTRL_HOSC_CLK_0 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
+#define PRCM_PLL_CTRL_HOSC_CLK_1 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
+#define PRCM_PLL_CTRL_HOSC_CLK_2 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
+#define PRCM_PLL_CTRL_HOSC_CLK_3 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
+#define PRCM_PLL_CTRL_LDO_OUT_MASK \
+ __PRCM_PLL_CTRL_LDO_OUT(0x7)
+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
+
+#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
+
+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
+#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
+#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
+#define __PRCM_CLK_OUTD_SRC_ERR 0x3
+#define PRCM_CLK_OUTD_SRC_LOSC2 \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
+#define PRCM_CLK_OUTD_SRC_LOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
+#define PRCM_CLK_OUTD_SRC_HOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
+#define PRCM_CLK_OUTD_SRC_ERR \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
+#define PRCM_CLK_OUTD_EN (0x1 << 31)
+
+#define PRCM_CPU0_PWROFF (0x1 << 0)
+#define PRCM_CPU1_PWROFF (0x1 << 1)
+#define PRCM_CPU2_PWROFF (0x1 << 2)
+#define PRCM_CPU3_PWROFF (0x1 << 3)
+#define PRCM_CPU_ALL_PWROFF (0xf << 0)
+
+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
+
+#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
+
+#define PRCM_VDD_SYS_RESET (0x1 << 0)
+
+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
+
+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
+
+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
+
+#define PRCM_SEC_SWITCH_APB0_CLK_NONSEC (0x1 << 0)
+#define PRCM_SEC_SWITCH_PLL_CFG_NONSEC (0x1 << 1)
+#define PRCM_SEC_SWITCH_PWR_GATE_NONSEC (0x1 << 2)
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+
+struct sunxi_prcm_reg {
+ u32 cpus_cfg; /* 0x000 */
+ u8 res0[0x8]; /* 0x004 */
+ u32 apb0_ratio; /* 0x00c */
+ u32 cpu0_cfg; /* 0x010 */
+ u32 cpu1_cfg; /* 0x014 */
+ u32 cpu2_cfg; /* 0x018 */
+ u32 cpu3_cfg; /* 0x01c */
+ u8 res1[0x8]; /* 0x020 */
+ u32 apb0_gate; /* 0x028 */
+ u8 res2[0x14]; /* 0x02c */
+ u32 pll_ctrl0; /* 0x040 */
+ u32 pll_ctrl1; /* 0x044 */
+ u8 res3[0x8]; /* 0x048 */
+ u32 clk_1wire; /* 0x050 */
+ u32 clk_ir; /* 0x054 */
+ u8 res4[0x58]; /* 0x058 */
+ u32 apb0_reset; /* 0x0b0 */
+ u8 res5[0x3c]; /* 0x0b4 */
+ u32 clk_outd; /* 0x0f0 */
+ u8 res6[0xc]; /* 0x0f4 */
+ u32 cpu_pwroff; /* 0x100 */
+ u8 res7[0xc]; /* 0x104 */
+ u32 vdd_sys_pwroff; /* 0x110 */
+ u8 res8[0x4]; /* 0x114 */
+ u32 gpu_pwroff; /* 0x118 */
+ u8 res9[0x4]; /* 0x11c */
+ u32 vdd_pwr_reset; /* 0x120 */
+ u8 res10[0x1c]; /* 0x124 */
+ u32 cpu_pwr_clamp[4]; /* 0x140 but first one is actually unused */
+ u8 res11[0x30]; /* 0x150 */
+ u32 dram_pwr; /* 0x180 */
+ u8 res12[0xc]; /* 0x184 */
+ u32 dram_tst; /* 0x190 */
+ u8 res13[0x3c]; /* 0x194 */
+ u32 prcm_sec_switch; /* 0x1d0 */
+};
+
+void prcm_apb0_enable(u32 flags);
+void prcm_apb0_disable(u32 flags);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
--
2.30.0
More information about the U-Boot
mailing list