[PATCH v2 14/21] sunxi: Add support for H616 SoC
Jernej Skrabec
jernej.skrabec at siol.net
Mon Jan 11 21:11:46 CET 2021
H616 is very similar to H6 so most of the infrastructure can be reused.
However, two big differences are that it doesn't have functional SRAM A2
which is usually used for TF-A and it doesn't have ARISC co-processor.
It also needs bigger SPL size - 48 KiB.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
arch/arm/dts/sunxi-u-boot.dtsi | 8 ++++++++
arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h | 7 +++++++
arch/arm/mach-sunxi/Kconfig | 11 ++++++++++-
arch/arm/mach-sunxi/clock_sun50i_h6.c | 2 +-
arch/arm/mach-sunxi/cpu_info.c | 2 ++
drivers/power/Kconfig | 1 +
include/configs/sunxi-common.h | 7 +++++++
7 files changed, 36 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
index c77cf7cacf0c..abe629c55e57 100644
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -3,6 +3,8 @@
#ifdef CONFIG_MACH_SUN50I_H6
#define BL31_ADDR 0x104000
#define SCP_ADDR 0x114000
+#elif defined(CONFIG_MACH_SUN50I_H616)
+#define BL31_ADDR 0x40004000
#else
#define BL31_ADDR 0x44000
#define SCP_ADDR 0x50000
@@ -61,6 +63,7 @@
};
};
+#ifndef CONFIG_MACH_SUN50I_H616
scp {
description = "SCP firmware";
type = "firmware";
@@ -73,6 +76,7 @@
missing-msg = "scp-sunxi";
};
};
+#endif
@fdt-SEQ {
description = "NAME";
@@ -87,7 +91,11 @@
@config-SEQ {
description = "NAME";
firmware = "atf";
+#ifdef CONFIG_MACH_SUN50I_H616
+ loadables = "uboot";
+#else
loadables = "scp", "uboot";
+#endif
fdt = "fdt-SEQ";
};
};
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
index 6392cb07b472..d9cf8ae04288 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
@@ -28,13 +28,20 @@
#define SUNXI_GIC400_BASE 0x03020000
#define SUNXI_IOMMU_BASE 0x030F0000
+#ifdef CONFIG_MACH_SUN50I_H6
#define SUNXI_DRAM_COM_BASE 0x04002000
#define SUNXI_DRAM_CTL0_BASE 0x04003000
#define SUNXI_DRAM_PHY0_BASE 0x04005000
+#endif
#define SUNXI_NFC_BASE 0x04011000
#define SUNXI_MMC0_BASE 0x04020000
#define SUNXI_MMC1_BASE 0x04021000
#define SUNXI_MMC2_BASE 0x04022000
+#ifdef CONFIG_MACH_SUN50I_H616
+#define SUNXI_DRAM_COM_BASE 0x047FA000
+#define SUNXI_DRAM_CTL0_BASE 0x047FB000
+#define SUNXI_DRAM_PHY0_BASE 0x04800000
+#endif
#define SUNXI_UART0_BASE 0x05000000
#define SUNXI_UART1_BASE 0x05000400
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index a8571d180259..1415355750c4 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -190,9 +190,10 @@ config MACH_SUNXI_H3_H5
select SUPPORT_SPL
# TODO: try out A80's 8GiB DRAM space
+# TODO: H616 supports 4 GiB DRAM space
config SUNXI_DRAM_MAX_SIZE
hex
- default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
+ default 0xC0000000 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 || MACH_SUN50I_H616
default 0x80000000
choice
@@ -355,6 +356,12 @@ config MACH_SUN50I_H6
select DRAM_SUN50I_H6
select SUN50I_GEN_H6
+config MACH_SUN50I_H616
+ bool "sun50i (Allwinner H616)"
+ select ARM64
+ select DRAM_SUN50I_H616
+ select SUN50I_GEN_H6
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
@@ -591,6 +598,7 @@ config SYS_CLK_FREQ
default 1008000000 if MACH_SUN8I
default 1008000000 if MACH_SUN9I
default 888000000 if MACH_SUN50I_H6
+ default 1008000000 if MACH_SUN50I_H616
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
@@ -601,6 +609,7 @@ config SYS_CONFIG_NAME
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
default "sun50i" if MACH_SUN50I_H6
+ default "sun50i" if MACH_SUN50I_H616
config SYS_BOARD
default "sunxi"
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index daca02019bab..06d84eb158d7 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -86,7 +86,7 @@ unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) 4 : 2;
+ int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index 875e5a1a8a8e..ba33ef24300c 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -99,6 +99,8 @@ int print_cpuinfo(void)
puts("CPU: Allwinner H5 (SUN50I)\n");
#elif defined CONFIG_MACH_SUN50I_H6
puts("CPU: Allwinner H6 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H616
+ puts("CPU: Allwinner H616 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d17cf2d9112a..c5fbf1f832a9 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -13,6 +13,7 @@ choice
depends on ARCH_SUNXI
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ default AXP305_POWER if MACH_SUN50I_H616
default AXP818_POWER if MACH_SUN8I_A83T
default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 203cb10fbabc..000f38647020 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -178,9 +178,14 @@
#define LOW_LEVEL_SRAM_STACK 0x00018000
#endif /* !CONFIG_ARM64 */
#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
+#ifdef CONFIG_MACH_SUN50I_H616
+#define CONFIG_SPL_MAX_SIZE 0xbfa0 /* 48 KiB */
+#define LOW_LEVEL_SRAM_STACK 0x58000
+#else
#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */
/* end of SRAM A2 on H6 for now */
#define LOW_LEVEL_SRAM_STACK 0x00118000
+#endif
#else
#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
@@ -188,7 +193,9 @@
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#ifndef CONFIG_MACH_SUN50I_H616
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
+#endif
/* I2C */
--
2.30.0
More information about the U-Boot
mailing list