[PATCHv3 3/4] drivers: tee: sandbox: add rpc test ta emulation

Jorge Ramirez-Ortiz jorge at foundries.io
Tue Jan 12 09:43:39 CET 2021


From: Igor Opaniuk <igor.opaniuk at foundries.io>

This adds support for RPC test trusted application emulation, which
permits to test reverse RPC calls to TEE supplicant. Currently it covers
requests to the I2C bus from TEE.

Signed-off-by: Igor Opaniuk <igor.opaniuk at foundries.io>
---
 drivers/tee/Makefile            |   2 +
 drivers/tee/optee/Kconfig       |   9 +++
 drivers/tee/sandbox.c           | 137 +++++++++++++++++++++++++++++++-
 include/tee/optee_ta_rpc_test.h |  28 +++++++
 4 files changed, 172 insertions(+), 4 deletions(-)
 create mode 100644 include/tee/optee_ta_rpc_test.h

diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
index 5c8ffdbce8..ff844195ae 100644
--- a/drivers/tee/Makefile
+++ b/drivers/tee/Makefile
@@ -2,5 +2,7 @@
 
 obj-y += tee-uclass.o
 obj-$(CONFIG_SANDBOX) += sandbox.o
+obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/supplicant.o
+obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/i2c.o
 obj-$(CONFIG_OPTEE) += optee/
 obj-y += broadcom/
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
index d489834df9..65622f30b1 100644
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
@@ -22,6 +22,15 @@ config OPTEE_TA_AVB
 	  The TA can support the "avb" subcommands "read_rb", "write"rb"
 	  and "is_unlocked".
 
+config OPTEE_TA_RPC_TEST
+	bool "Support RPC TEST TA"
+	depends on SANDBOX_TEE
+	default y
+	help
+	  Enables support for RPC test trusted application emulation, which
+	  permits to test reverse RPC calls to TEE supplicant. Should
+	  be used only in sandbox env.
+
 endmenu
 
 endif
diff --git a/drivers/tee/sandbox.c b/drivers/tee/sandbox.c
index 4b91e7db1b..1cacd443f4 100644
--- a/drivers/tee/sandbox.c
+++ b/drivers/tee/sandbox.c
@@ -7,11 +7,15 @@
 #include <sandboxtee.h>
 #include <tee.h>
 #include <tee/optee_ta_avb.h>
+#include <tee/optee_ta_rpc_test.h>
+
+#include "optee/optee_msg.h"
+#include "optee/optee_private.h"
 
 /*
  * The sandbox tee driver tries to emulate a generic Trusted Exectution
- * Environment (TEE) with the Trusted Application (TA) OPTEE_TA_AVB
- * available.
+ * Environment (TEE) with the Trusted Applications (TA) OPTEE_TA_AVB and
+ * OPTEE_TA_RPC_TEST available.
  */
 
 static const u32 pstorage_max = 16;
@@ -32,7 +36,32 @@ struct ta_entry {
 			   struct tee_param *params);
 };
 
-#ifdef CONFIG_OPTEE_TA_AVB
+static int get_msg_arg(struct udevice *dev, uint num_params,
+		       struct tee_shm **shmp, struct optee_msg_arg **msg_arg)
+{
+	int rc;
+	struct optee_msg_arg *ma;
+
+	rc = __tee_shm_add(dev, OPTEE_MSG_NONCONTIG_PAGE_SIZE, NULL,
+			   OPTEE_MSG_GET_ARG_SIZE(num_params), TEE_SHM_ALLOC,
+			   shmp);
+	if (rc)
+		return rc;
+
+	ma = (*shmp)->addr;
+	memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params));
+	ma->num_params = num_params;
+	*msg_arg = ma;
+
+	return 0;
+}
+
+inline void *optee_alloc_and_init_page_list(void *buf, ulong len,
+					   u64 *phys_buf_ptr)
+{
+	return 0;
+}
+
 static u32 get_attr(uint n, uint num_params, struct tee_param *params)
 {
 	if (n >= num_params)
@@ -63,6 +92,7 @@ bad_params:
 	return TEE_ERROR_BAD_PARAMETERS;
 }
 
+#ifdef CONFIG_OPTEE_TA_AVB
 static u32 ta_avb_open_session(struct udevice *dev, uint num_params,
 			       struct tee_param *params)
 {
@@ -214,7 +244,100 @@ static u32 ta_avb_invoke_func(struct udevice *dev, u32 func, uint num_params,
 		return TEE_ERROR_NOT_SUPPORTED;
 	}
 }
-#endif /*OPTEE_TA_AVB*/
+#endif /* OPTEE_TA_AVB */
+
+#ifdef CONFIG_OPTEE_TA_RPC_TEST
+static u32 ta_rpc_test_open_session(struct udevice *dev, uint num_params,
+				    struct tee_param *params)
+{
+	/*
+	 * We don't expect additional parameters when opening a session to
+	 * this TA.
+	 */
+	return check_params(TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
+			    TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
+			    num_params, params);
+}
+
+static void fill_i2c_rpc_params(struct optee_msg_arg *msg_arg, u64 bus_num,
+				u64 chip_addr, u64 op,
+				struct tee_param_memref memref)
+{
+	msg_arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+	msg_arg->params[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+	msg_arg->params[2].attr = OPTEE_MSG_ATTR_TYPE_RMEM_INOUT;
+	msg_arg->params[3].attr = OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT;
+
+	/* trigger I2C services of TEE supplicant */
+	msg_arg->cmd = OPTEE_MSG_RPC_CMD_I2C_TRANSFER;
+
+	msg_arg->params[0].u.value.a = op;
+	msg_arg->params[0].u.value.b = bus_num;
+	msg_arg->params[0].u.value.c = chip_addr;
+
+	/* buffer to read/write data */
+	msg_arg->params[2].u.rmem.shm_ref = (ulong)memref.shm;
+	msg_arg->params[2].u.rmem.size = memref.size;
+	msg_arg->params[2].u.rmem.offs = memref.shm_offs;
+
+	msg_arg->num_params = 4;
+}
+
+static u32 ta_rpc_test_invoke_func(struct udevice *dev, u32 func,
+				   uint num_params,
+				   struct tee_param *params)
+{
+	struct tee_shm *shm;
+	struct tee_param_memref memref_data;
+	struct optee_msg_arg *msg_arg;
+	int chip_addr, bus_num, op;
+	int res;
+
+	res = check_params(TEE_PARAM_ATTR_TYPE_VALUE_INPUT,
+			   TEE_PARAM_ATTR_TYPE_MEMREF_INOUT,
+			   TEE_PARAM_ATTR_TYPE_NONE,
+			   TEE_PARAM_ATTR_TYPE_NONE,
+			   num_params, params);
+	if (res)
+		return TEE_ERROR_BAD_PARAMETERS;
+
+	bus_num = params[0].u.value.a;
+	chip_addr = params[0].u.value.b;
+	memref_data = params[1].u.memref;
+
+	switch (func) {
+	case TA_RPC_TEST_CMD_I2C_READ:
+		op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD;
+		break;
+	case TA_RPC_TEST_CMD_I2C_WRITE:
+		op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR;
+		break;
+	default:
+		return TEE_ERROR_NOT_SUPPORTED;
+	}
+
+	/*
+	 * Fill params for an RPC call to tee supplicant
+	 */
+	res = get_msg_arg(dev, 4, &shm, &msg_arg);
+	if (res)
+		goto bad;
+
+	fill_i2c_rpc_params(msg_arg, bus_num, chip_addr, op, memref_data);
+
+	/* Make an RPC call to tee supplicant */
+	optee_suppl_cmd(dev, shm, 0);
+	res = msg_arg->ret;
+
+bad:
+	tee_shm_free(shm);
+
+	if (res)
+		return res;
+
+	return TEE_SUCCESS;
+}
+#endif /* CONFIG_OPTEE_TA_RPC_TEST */
 
 static const struct ta_entry ta_entries[] = {
 #ifdef CONFIG_OPTEE_TA_AVB
@@ -223,6 +346,12 @@ static const struct ta_entry ta_entries[] = {
 	  .invoke_func = ta_avb_invoke_func,
 	},
 #endif
+#ifdef CONFIG_OPTEE_TA_RPC_TEST
+	{ .uuid = TA_RPC_TEST_UUID,
+	  .open_session = ta_rpc_test_open_session,
+	  .invoke_func = ta_rpc_test_invoke_func,
+	},
+#endif
 };
 
 static void sandbox_tee_get_version(struct udevice *dev,
diff --git a/include/tee/optee_ta_rpc_test.h b/include/tee/optee_ta_rpc_test.h
new file mode 100644
index 0000000000..cae2fb04b4
--- /dev/null
+++ b/include/tee/optee_ta_rpc_test.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/* Copyright (c) 2020 Foundries Ltd */
+
+#ifndef __TA_RPC_TEST_H
+#define __TA_RPC_TEST_H
+
+#define TA_RPC_TEST_UUID { 0x48420575, 0x96ca, 0x401a, \
+		      { 0x89, 0x91, 0x1e, 0xfd, 0xce, 0xbd, 0x7d, 0x04 } }
+
+/*
+ * Does a reverse RPC call for I2C read
+ *
+ * in		params[0].value.a:	bus number
+ * in		params[0].value.b:	chip address
+ * inout	params[1].u.memref:	buffer to read data
+ */
+#define TA_RPC_TEST_CMD_I2C_READ	0
+
+/*
+ * Does a reverse RPC call for I2C write
+ *
+ * in		params[0].value.a:	bus number
+ * in		params[0].value.b:	chip address
+ * inout	params[1].u.memref:	buffer with data to write
+ */
+#define TA_RPC_TEST_CMD_I2C_WRITE	1
+
+#endif /* __TA_RPC_TEST_H */
-- 
2.17.1



More information about the U-Boot mailing list