[PATCH] board: amlogic: vim3: fix setup ethernet mac from efuse

[Neil Armstrong]

Hi Artem,

On 12/01/2021 12:42, Artem Lapkin wrote:
> Fix reading built-in ethernet MAC address from efuse
> 
> NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset
> 
> if mac from efuse not valid we use meson_generate_serial_ethaddr
> 
> NOTE: remake odroid-n2.c from Neil Armstrong <narmstrong at baylibre.com>
> 
> Signed-off-by: Artem Lapkin <art at khadas.com>
> ---
>  board/amlogic/vim3/vim3.c | 22 +++++++++++++++++++---
>  1 file changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
> index 824fff8262..87d9fe1f02 100644
> --- a/board/amlogic/vim3/vim3.c
> +++ b/board/amlogic/vim3/vim3.c
> @@ -139,26 +139,42 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
>  }
>  
>  #define EFUSE_MAC_OFFSET	0
> -#define EFUSE_MAC_SIZE		6
> +#define EFUSE_MAC_SIZE		12
> +#define MAC_ADDR_LEN		6
>  
>  int misc_init_r(void)
>  {
> -	uint8_t mac_addr[EFUSE_MAC_SIZE];
> +	u8 mac_addr[MAC_ADDR_LEN];
> +	char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
>  	ssize_t len;
>  
>  	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
>  
>  	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
>  		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
> -					  mac_addr, EFUSE_MAC_SIZE);
> +					  efuse_mac_addr, EFUSE_MAC_SIZE);
>  		if (len != EFUSE_MAC_SIZE)
>  			return 0;
>  
> +		/* MAC is stored in ASCII format, 1bytes = 2characters */
> +		for (int i = 0; i < 6; i++) {
> +			tmp[0] = efuse_mac_addr[i * 2];
> +			tmp[1] = efuse_mac_addr[i * 2 + 1];
> +			tmp[2] = '\0';
> +			mac_addr[i] = simple_strtoul(tmp, NULL, 16);
> +		}
> +
>  		if (is_valid_ethaddr(mac_addr))
>  			eth_env_set_enetaddr("ethaddr", mac_addr);
>  		else
>  			meson_generate_serial_ethaddr();
> +
> +		eth_env_get_enetaddr("ethaddr", mac_addr);
> +		printf("[i] setup onboard mac %02X:%02X:%02X:%02X:%02X:%02X\n",
> +		       mac_addr[0], mac_addr[1], mac_addr[2],
> +		       mac_addr[3], mac_addr[4], mac_addr[5]);


Yes, it's not necessary to print the MAC, I'll drop while applying.

>  	}
>  
>  	return 0;
>  }
> +
> 

Applying to u-boot-amlogic

Neil