[RFC PATCH 2/3] efi_loader: efi_loader: Replace config option for initrd loading

Heinrich Schuchardt xypron.glpk at gmx.de
Wed Jan 13 14:08:32 CET 2021


On 13.01.21 12:11, Ilias Apalodimas wrote:
> Up to now we install EFI_LOAD_FILE2_PROTOCOL to load an initrd
> unconditionally. Although we correctly return various EFI exit codes
> depending on the file status (i.e EFI_NO_MEDIA, EFI_NOT_FOUND etc), the
> kernel loader, only falls back to the cmdline interpreted initrd if the
> protocol is not installed.
>
> This creates a problem for EFI installers, since they won't be able to
> load their own initrd and continue the installation. It also makes the
> feature hard to use, since we can either have a single initrd or we have
> to recompile u-boot if the filename changes.
>
> So let's introduce a different logic that will decouple the initrd
> path from the config option we currently have.
> When defining a UEFI BootXXXX we can use the filepathlist and store
> a file path pointing to our initrd. Specifically the EFI spec describes:
>
> "The first element of the array is a device path that describes the device
> and location of the Image for this load option. Other device paths may
> optionally exist in the FilePathList, but their usage is OSV specific"
>
> When the EFI application is launched through the bootmgr, we'll try to
> interpret the extra device path. If that points to a file that exists on
> our disk, we'll now install the load_file2 and the efi-stub will be able
> to use it.
>
> This opens up another path using U-Boot and defines a new boot flow.
> A user will be able to control the kernel/initrd pairs without explicit
> cmdline args or GRUB.
>
> Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
> ---
>  cmd/bootefi.c                    |   3 +
>  include/efi_loader.h             |   1 +
>  lib/efi_loader/Kconfig           |  13 +--
>  lib/efi_loader/efi_bootmgr.c     |   3 +
>  lib/efi_loader/efi_load_initrd.c | 154 ++++++++++++++++---------------
>  5 files changed, 91 insertions(+), 83 deletions(-)
>
> diff --git a/cmd/bootefi.c b/cmd/bootefi.c
> index fdf909f8da2c..053927d5d986 100644
> --- a/cmd/bootefi.c
> +++ b/cmd/bootefi.c
> @@ -357,6 +357,9 @@ static efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options)
>
>  	free(load_options);
>
> +	if (IS_ENABLED(CONFIG_EFI_LOAD_FILE2_INITRD))
> +		efi_initrd_deregister();
> +
>  	return ret;
>  }
>
> diff --git a/include/efi_loader.h b/include/efi_loader.h
> index 4719fa93f06d..5d2e161963c3 100644
> --- a/include/efi_loader.h
> +++ b/include/efi_loader.h
> @@ -432,6 +432,7 @@ efi_status_t efi_net_register(void);
>  /* Called by bootefi to make the watchdog available */
>  efi_status_t efi_watchdog_register(void);
>  efi_status_t efi_initrd_register(void);
> +void efi_initrd_deregister(void);
>  /* Called by bootefi to make SMBIOS tables available */
>  /**
>   * efi_acpi_register() - write out ACPI tables
> diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
> index fdf245dea30b..597a3ee86c88 100644
> --- a/lib/efi_loader/Kconfig
> +++ b/lib/efi_loader/Kconfig
> @@ -307,14 +307,11 @@ config EFI_LOAD_FILE2_INITRD
>  	help
>  	  Expose a EFI_FILE_LOAD2_PROTOCOL that the Linux UEFI stub can
>  	  use to load the initial ramdisk. Once this is enabled using
> -	  initrd=<ramdisk> will stop working.
> -
> -config EFI_INITRD_FILESPEC
> -	string "initramfs path"
> -	default "host 0:1 initrd"
> -	depends on EFI_LOAD_FILE2_INITRD
> -	help
> -	  Full path of the initramfs file, e.g. mmc 0:2 initramfs.cpio.gz.
> +	  initrd=<ramdisk> will stop working. The protocol will only be

How about

"Linux v5.7 and later can make use of this option. If the boot option
selected by the UEFI boot manager specifies an existing file to be used
as initial RAM disk, a Linux specific Load File2 protocol will be
installed and Linux 5.7+ will ignore any initrd=<ramdisk> command line
argument."

> +	  installed if bootmgr is used and the file is found on the defined
> +	  path. A boot entry of Boot0001 will try to match Initrd0001 and use

This does not match the implementation.

> +	  it. Initrd EFI variable format should be '<dev> <part> <filename>'
> +	  i.e 'mmc 0:1 boot/initrd'

"The efidebug command can be used to specify the file with the initial
RAM disk."

>
>  config EFI_SECURE_BOOT
>  	bool "Enable EFI secure boot support"
> diff --git a/lib/efi_loader/efi_bootmgr.c b/lib/efi_loader/efi_bootmgr.c
> index 0fe503a7f376..aa5d521535ee 100644
> --- a/lib/efi_loader/efi_bootmgr.c
> +++ b/lib/efi_loader/efi_bootmgr.c
> @@ -222,6 +222,9 @@ static efi_status_t try_load_entry(u16 n, efi_handle_t *handle,
>  		ret = efi_set_variable_int(L"BootCurrent",
>  					   &efi_global_variable_guid,
>  					   attributes, sizeof(n), &n, false);
> +		/* try to register load file2 for initrd's */
> +		if (IS_ENABLED(CONFIG_EFI_LOAD_FILE2_INITRD))
> +			ret |= efi_initrd_register();
>  		if (ret != EFI_SUCCESS) {
>  			if (EFI_CALL(efi_unload_image(*handle))
>  			    != EFI_SUCCESS)
> diff --git a/lib/efi_loader/efi_load_initrd.c b/lib/efi_loader/efi_load_initrd.c
> index b9ee8839054f..bb0c5e63b65c 100644
> --- a/lib/efi_loader/efi_load_initrd.c
> +++ b/lib/efi_loader/efi_load_initrd.c
> @@ -5,7 +5,9 @@
>
>  #include <common.h>
>  #include <efi_loader.h>
> +#include <efi_helper.h>
>  #include <efi_load_initrd.h>
> +#include <efi_variable.h>
>  #include <fs.h>
>  #include <malloc.h>
>  #include <mapmem.h>
> @@ -39,41 +41,10 @@ static const struct efi_initrd_dp dp = {
>  	}
>  };
>
> -/**
> - * get_file_size() - retrieve the size of initramfs, set efi status on error
> - *
> - * @dev:			device to read from, e.g. "mmc"
> - * @part:			device partition, e.g. "0:1"
> - * @file:			name of file
> - * @status:			EFI exit code in case of failure
> - *
> - * Return:			size of file
> - */
> -static loff_t get_file_size(const char *dev, const char *part, const char *file,
> -			    efi_status_t *status)
> -{
> -	loff_t sz = 0;
> -	int ret;
> -
> -	ret = fs_set_blk_dev(dev, part, FS_TYPE_ANY);
> -	if (ret) {
> -		*status = EFI_NO_MEDIA;
> -		goto out;
> -	}
> -
> -	ret = fs_size(file, &sz);
> -	if (ret) {
> -		sz = 0;
> -		*status = EFI_NOT_FOUND;
> -		goto out;
> -	}
> -
> -out:
> -	return sz;
> -}
> +static efi_handle_t efi_initrd_handle;
>
>  /**
> - * efi_load_file2initrd() - load initial RAM disk
> + * efi_load_file2_initrd() - load initial RAM disk
>   *
>   * This function implements the LoadFile service of the EFI_LOAD_FILE2_PROTOCOL
>   * in order to load an initial RAM disk requested by the Linux kernel stub.
> @@ -93,21 +64,15 @@ efi_load_file2_initrd(struct efi_load_file_protocol *this,
>  		      struct efi_device_path *file_path, bool boot_policy,
>  		      efi_uintn_t *buffer_size, void *buffer)
>  {
> -	char *filespec;
>  	efi_status_t status = EFI_NOT_FOUND;

In all our other coding this variable is called ret.
I would prefer to do the same here too.

Best regards

Heinrich

> -	loff_t file_sz = 0, read_sz = 0;
> -	char *dev, *part, *file;
> -	char *pos;
> -	int ret;
> +	struct efi_device_path *initrd_path = NULL;
> +	struct efi_file_info *info = NULL;
> +	struct efi_file_handle *f;
> +	efi_uintn_t bs;
>
>  	EFI_ENTRY("%p, %p, %d, %p, %p", this, file_path, boot_policy,
>  		  buffer_size, buffer);
>
> -	filespec = strdup(CONFIG_EFI_INITRD_FILESPEC);
> -	if (!filespec)
> -		goto out;
> -	pos = filespec;
> -
>  	if (!this || this != &efi_lf2_protocol ||
>  	    !buffer_size) {
>  		status = EFI_INVALID_PARAMETER;
> @@ -125,51 +90,82 @@ efi_load_file2_initrd(struct efi_load_file_protocol *this,
>  		goto out;
>  	}
>
> -	/*
> -	 * expect a string with three space separated parts:
> -	 *
> -	 * * a block device type, e.g. "mmc"
> -	 * * a device and partition identifier, e.g. "0:1"
> -	 * * a file path on the block device, e.g. "/boot/initrd.cpio.gz"
> -	 */
> -	dev = strsep(&pos, " ");
> -	if (!dev)
> +	initrd_path = efi_get_fp_from_boot(INITRD_DP);
> +	if (!initrd_path) {
> +		status = EFI_NOT_FOUND;
>  		goto out;
> -	part = strsep(&pos, " ");
> -	if (!part)
> +	}
> +
> +	/* Open file */
> +	f = efi_file_from_path(initrd_path);
> +	if (!f) {
> +		status = EFI_NOT_FOUND;
>  		goto out;
> -	file = strsep(&pos, " ");
> -	if (!file)
> +	}
> +
> +	/* Get file size */
> +	bs = 0;
> +	EFI_CALL(status = f->getinfo(f, (efi_guid_t *)&efi_file_info_guid,
> +				     &bs, info));
> +	if (status != EFI_BUFFER_TOO_SMALL) {
> +		status = EFI_DEVICE_ERROR;
>  		goto out;
> +	}
>
> -	file_sz = get_file_size(dev, part, file, &status);
> -	if (!file_sz)
> +	info = malloc(bs);
> +	EFI_CALL(status = f->getinfo(f, (efi_guid_t *)&efi_file_info_guid, &bs,
> +				     info));
> +	if (status != EFI_SUCCESS)
>  		goto out;
>
> -	if (!buffer || *buffer_size < file_sz) {
> +	bs = info->file_size;
> +	//efi_load_image_from_file
> +	if (!buffer || *buffer_size < bs) {
>  		status = EFI_BUFFER_TOO_SMALL;
> -		*buffer_size = file_sz;
> +		*buffer_size = bs;
>  	} else {
> -		ret = fs_set_blk_dev(dev, part, FS_TYPE_ANY);
> -		if (ret) {
> -			status = EFI_NO_MEDIA;
> -			goto out;
> -		}
> -
> -		ret = fs_read(file, map_to_sysmem(buffer), 0, *buffer_size,
> -			      &read_sz);
> -		if (ret || read_sz != file_sz)
> -			goto out;
> -		*buffer_size = read_sz;
> -
> -		status = EFI_SUCCESS;
> +		EFI_CALL(status = f->read(f, &bs, (void *)(uintptr_t)buffer));
> +		*buffer_size = bs;
>  	}
>
>  out:
> -	free(filespec);
> +	free(info);
> +	efi_free_pool(initrd_path);
> +	EFI_CALL(f->close(f));
>  	return EFI_EXIT(status);
>  }
>
> +/**
> + * check_initrd() - Determine if the file defined as an initrd in Boot####
> + *		    load_options device path is present
> + *
> + * Return:	status code
> + */
> +static efi_status_t check_initrd(void)
> +{
> +	struct efi_device_path *file_path;
> +	struct efi_file_handle *f;
> +
> +	/*
> +	 * if bootmgr is setup with and initrd, that will be the second
> +	 * device path instance in our load options located in Boot####
> +	 */
> +	file_path = efi_get_fp_from_boot(INITRD_DP);
> +	if (!file_path)
> +		return EFI_NOT_FOUND;
> +
> +	f = efi_file_from_path(file_path);
> +	if (!f) {
> +		efi_free_pool(file_path);
> +		return EFI_NOT_FOUND;
> +	}
> +
> +	EFI_CALL(f->close(f));
> +	efi_free_pool(file_path);
> +
> +	return EFI_SUCCESS;
> +}
> +
>  /**
>   * efi_initrd_register() - create handle for loading initial RAM disk
>   *
> @@ -182,9 +178,12 @@ out:
>   */
>  efi_status_t efi_initrd_register(void)
>  {
> -	efi_handle_t efi_initrd_handle = NULL;
>  	efi_status_t ret;
>
> +	ret = check_initrd();
> +	if (ret != EFI_SUCCESS)
> +		return ret;
> +
>  	ret = EFI_CALL(efi_install_multiple_protocol_interfaces
>  		       (&efi_initrd_handle,
>  			/* initramfs */
> @@ -196,3 +195,8 @@ efi_status_t efi_initrd_register(void)
>
>  	return ret;
>  }
> +
> +void efi_initrd_deregister(void)
> +{
> +	efi_delete_handle(efi_initrd_handle);
> +}
>



More information about the U-Boot mailing list