[PATCH v3] imx8mq: configs: add support for distro boot commands

[Alice Guo (OSS)]

From: Alice Guo <alice.guo at nxp.com>

Supported boot device types in iMX8MQ: MMC, DHCP.

CONFIG_DISTRO_DEFAULTS is added for enabling the DISTRO_DEFAULTS option.

CONFIG_BOOTCOMMAND which is defined in include/configs/imx8mq_evk.h is
deleted because "run distro_bootcmd" is required to be the default boot
mode.

scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be
loaded to prior to execution.

kernel_addr_r is the location in RAM where the kernel will be loaded to.

Delete unnecessary environment variables because "run distro_bootcmd" is
set to be the default boot mode.

Signed-off-by: Alice Guo <alice.guo at nxp.com>
---

Changes for v3:
 - enable the DISTRO_DEFAULTS option by adding CONFIG_DISTRO_DEFAULTS=y
 - modify commit log
Changes for v2:
 - re-add boot_fdt, initrd_addr and bootm_size which may need to be used

 configs/imx8mq_evk_defconfig |  1 +
 include/configs/imx8mq_evk.h | 75 ++++++------------------------------
 2 files changed, 13 insertions(+), 63 deletions(-)

diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index de91a76d41..424301bf4d 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -36,6 +36,7 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 96bfff749c..1861ebad18 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -74,20 +74,20 @@
 #define IMX_FEC_BASE			0x30BE0000
 #endif

-#define CONFIG_MFG_ENV_SETTINGS \
-	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
-		"rdinit=/linuxrc " \
-		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
-		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
-		"g_mass_storage.iSerialNumber=\"\" "\
-		"clk_ignore_unused "\
-		"\0" \
-	"initrd_addr=0x43800000\0" \
-	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
+       func(MMC, mmc, 1) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-	CONFIG_MFG_ENV_SETTINGS \
-	"script=boot.scr\0" \
+	BOOTENV \
+	"scriptaddr=0x43500000\0" \
+	"kernel_addr_r=0x40880000\0" \
 	"image=Image\0" \
 	"console=ttymxc0,115200\0" \
 	"fdt_addr=0x43000000\0"			\
@@ -95,59 +95,8 @@
 	"fdt_file=imx8mq-evk.dtb\0" \
 	"initrd_addr=0x43800000\0"		\
 	"bootm_size=0x10000000\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
-	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"else " \
-			"echo wait for boot; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"root=/dev/nfs " \
-		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs;  " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${loadaddr} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"booti ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"echo WARN: Cannot load the DT; " \
-			"fi; " \
-		"else " \
-			"booti; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else booti ${loadaddr} - ${fdt_addr}; fi"

 /* Link Definitions */
 #define CONFIG_LOADADDR			0x40480000
--
2.17.1