[NXP-IMX] please pull nxp-imx-2021-1-16

[Stefano Babic]

Hi Peng,

On 16.01.21 08:18, Peng Fan wrote:
> Hi Stefano,
> 
> Please pull nxp-imx-2021-1-16
> ---------------------------------------
> nandbcb update/fix
> sync i.MX8M dts from Linux kernel
> add i.MX8MN LPDDR4 evk board
> eth support for i.MX8MP evk
> ddr fix for i.MX8M
> ---------------------------------------
> 
> CI:
> My github ci not work.
> I run buildman local and not see failure.
> 

No problem, I will start the runner on gitlab before PR.

Regards,
Stefano

> Thanks,
> Peng.
> 
> 
> The following changes since commit 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
> 
>    Merge tag 'efi-2021-01-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi (2020-12-29 10:23:58 -0500)
> 
> are available in the Git repository at:
> 
>    https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-1-16
> 
> for you to fetch changes up to e02b2ca34b58131cb64b19887af007adb389f7bd:
> 
>    imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44 +0800)
> 
> ----------------------------------------------------------------
> Han Xu (1):
>        nandbcb: nand support for i.MX8MP
> 
> Peng Fan (12):
>        imx: imx8mp_evk: enable eth support
>        imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
>        imx: imx8mn_evk: correct stack/malloc adress
>        arm: dts: imx8mn: sync dts from Linux Kernel
>        imx: imx8mn: add i.MX8MN LPDDR4 EVK support
>        imx8m: clock: add type of set_clk_eqos
>        arm: dts: imx8mp: sync dts from Linux Kernel
>        arm: dts: imx8mm: sync dts from Linux Kernel
>        arm: dts: imx8mq: sync dts from Linux Kernel
>        imx8m: lowlevel_init: tune alignment
>        imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
>        imx8m: add QSPI boot dev
> 
> Ye Li (9):
>        imx: ddr: imx8m: Move selfref_en after DDR scrub
>        nandbcb: Fix uninitialized variable
>        imx: nandbcb: Fix resource leak
>        imx: nandbcb: Fix resource leak in read_fcb
>        imx: nandbcb: Fix potential overflow in fill_dbbt_data
>        imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config
>        imx: Fix market segment fuse offset on iMX8MP
>        imx6: Remove AHCI device before boot OS
>        imx: timer: Modify GPT timer driver for mx7
> 
>   arch/arm/dts/Makefile                           |    1 +
>   arch/arm/dts/imx8mm-evk.dts                     |  534 ++++++------------------------------------
>   arch/arm/dts/imx8mm-evk.dtsi                    |  489 ++++++++++++++++++++++++++++++++++++++
>   arch/arm/dts/imx8mm.dtsi                        |   53 ++++-
>   arch/arm/dts/imx8mn-ddr4-evk.dts                |  321 ++++++++++---------------
>   arch/arm/dts/imx8mn-evk-u-boot.dtsi             |    6 +
>   arch/arm/dts/imx8mn-evk.dts                     |  128 ++++++++++
>   arch/arm/dts/imx8mn-evk.dtsi                    |  360 ++++++++++++++++++++++++++++
>   arch/arm/dts/imx8mn-pinfunc.h                   | 1266 +++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
>   arch/arm/dts/imx8mn.dtsi                        |  411 +++++++++++++++++++++++++++-----
>   arch/arm/dts/imx8mp-evk-u-boot.dtsi             |    4 +
>   arch/arm/dts/imx8mp-evk.dts                     |  117 +++++++++-
>   arch/arm/dts/imx8mp-pinfunc.h                   |  360 +++++++++-------------------
>   arch/arm/dts/imx8mp.dtsi                        |  234 +++++++++++++++++--
>   arch/arm/dts/imx8mq-evk.dts                     |  186 ++++++++++++---
>   arch/arm/dts/imx8mq-pinfunc.h                   |  623 ++++++++++++++++++++++++++++++++++++++++++++++++
>   arch/arm/dts/imx8mq.dtsi                        |  302 ++++++++++++++++++++++--
>   arch/arm/include/asm/arch-imx8m/clock.h         |    1 +
>   arch/arm/include/asm/arch-imx8m/imx-regs.h      |    2 +
>   arch/arm/mach-imx/cmd_nandbcb.c                 |   34 +--
>   arch/arm/mach-imx/cpu.c                         |   30 ++-
>   arch/arm/mach-imx/imx8m/Kconfig                 |    6 +
>   arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg |   17 ++
>   arch/arm/mach-imx/imx8m/lowlevel_init.S         |    2 +-
>   arch/arm/mach-imx/spl.c                         |    2 +
>   arch/arm/mach-imx/timer.c                       |   16 +-
>   board/freescale/imx8mn_evk/Kconfig              |    2 +-
>   board/freescale/imx8mn_evk/Makefile             |    1 +
>   board/freescale/imx8mn_evk/lpddr4_timing.c      | 1585 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>   board/freescale/imx8mp_evk/imx8mp_evk.c         |   65 +++++-
>   configs/imx8mn_ddr4_evk_defconfig               |    2 +-
>   configs/imx8mn_evk_defconfig                    |   80 +++++++
>   configs/imx8mp_evk_defconfig                    |    9 +-
>   doc/board/freescale/imx8mn_evk.rst              |   20 +-
>   drivers/ddr/imx/imx8m/ddr_init.c                |    5 +-
>   drivers/power/power_i2c.c                       |    8 +-
>   include/configs/imx8mn_evk.h                    |    9 +-
>   include/configs/imx8mp_evk.h                    |   18 +-
>   include/dt-bindings/clock/imx8mn-clock.h        |   30 ++-
>   include/dt-bindings/clock/imx8mp-clock.h        |   95 +++++++-
>   include/dt-bindings/clock/imx8mq-clock.h        |   31 ++-
>   41 files changed, 5743 insertions(+), 1722 deletions(-)
>   create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
>   create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>   create mode 100644 arch/arm/dts/imx8mn-evk.dts
>   create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
>   create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
>   create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
>   create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>   create mode 100644 configs/imx8mn_evk_defconfig
> 

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================