[PATCH] arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
Biju Das
biju.das.jz at bp.renesas.com
Sun Jan 17 17:30:11 CET 2021
DTS files apart from r8a774a1-hihope-rzg2m-u-boot.dts and
r8a774a1-u-boot.dtsi have been imported from linux 5.10
commit 2c85ebc57b3e1817 ("Linux 5.10").
Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
---
arch/arm/dts/hihope-common.dtsi | 377 ++++++++++++++++++
arch/arm/dts/hihope-rev4.dtsi | 124 ++++++
arch/arm/dts/hihope-rzg2-ex.dtsi | 92 +++++
arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts | 21 +
arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts | 27 ++
arch/arm/dts/r8a774a1-hihope-rzg2m.dts | 37 ++
arch/arm/dts/r8a774a1-u-boot.dtsi | 55 +++
7 files changed, 733 insertions(+)
create mode 100644 arch/arm/dts/hihope-common.dtsi
create mode 100644 arch/arm/dts/hihope-rev4.dtsi
create mode 100644 arch/arm/dts/hihope-rzg2-ex.dtsi
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
create mode 100644 arch/arm/dts/r8a774a1-hihope-rzg2m.dts
create mode 100644 arch/arm/dts/r8a774a1-u-boot.dtsi
diff --git a/arch/arm/dts/hihope-common.dtsi b/arch/arm/dts/hihope-common.dtsi
new file mode 100644
index 0000000000..b1eb6a0802
--- /dev/null
+++ b/arch/arm/dts/hihope-common.dtsi
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card";
+
+ label = "rcar-sound";
+
+ dais = <&rsnd_port>;
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ x302_clk: x302-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x304_clk: x304-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&du {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gpio6 {
+ usb1-reset {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "usb1-reset";
+ };
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
+};
+
+&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ versaclock5: clock-generator at 6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ hscif0_pins: hscif0 {
+ groups = "hscif0_data", "hscif0_ctrl";
+ function = "hscif0";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi2 {
+ status = "okay";
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3_peri0 {
+ phys = <&usb3_phy0>;
+ phy-names = "usb";
+
+ companion = <&xhci0>;
+
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/hihope-rev4.dtsi b/arch/arm/dts/hihope-rev4.dtsi
new file mode 100644
index 0000000000..30e929997a
--- /dev/null
+++ b/arch/arm/dts/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+
+ wlan_en_reg: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ x1801_clk: x1801-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+};
+
+&hscif0 {
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ cs2000: clk_multiplier at 4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x1801_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&pfc {
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ function = "ssi";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint>;
+ frame-master = <&rsnd_endpoint>;
+
+ playback = <&ssi2>;
+ };
+ };
+};
diff --git a/arch/arm/dts/hihope-rzg2-ex.dtsi b/arch/arm/dts/hihope-rzg2-ex.dtsi
new file mode 100644
index 0000000000..7745012d4b
--- /dev/null
+++ b/arch/arm/dts/hihope-rzg2-ex.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/ {
+ aliases {
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data";
+ function = "can1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 0000000000..f0e4a1f25d
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M with sub board";
+ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+ "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
new file mode 100644
index 0000000000..b735e97221
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m-u-boot.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot for the Hihope RZ/G2M board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "r8a774a1-u-boot.dtsi"
+
+&gpio3 {
+ bt_reg_on{
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "bt-reg-on";
+ };
+};
+
+&gpio4 {
+ wlan_reg_on{
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "wlan-reg-on";
+ };
+};
diff --git a/arch/arm/dts/r8a774a1-hihope-rzg2m.dts b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 0000000000..a574c85a50
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+ compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory at 600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm/dts/r8a774a1-u-boot.dtsi b/arch/arm/dts/r8a774a1-u-boot.dtsi
new file mode 100644
index 0000000000..f826c41c3b
--- /dev/null
+++ b/arch/arm/dts/r8a774a1-u-boot.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source extras for U-Boot on RZ/G2 R8A774A1 SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include "r8a779x-u-boot.dtsi"
+
+&extalr_clk {
+ u-boot,dm-pre-reloc;
+};
+
+/delete-node/ &audma0;
+/delete-node/ &audma1;
+/delete-node/ &can0;
+/delete-node/ &can1;
+/delete-node/ &canfd;
+/delete-node/ &csi20;
+/delete-node/ &csi40;
+/delete-node/ &du;
+/delete-node/ &fcpf0;
+/delete-node/ &fcpvb0;
+/delete-node/ &fcpvd0;
+/delete-node/ &fcpvd1;
+/delete-node/ &fcpvd2;
+/delete-node/ &fcpvi0;
+/delete-node/ &hdmi0;
+/delete-node/ &lvds0;
+/delete-node/ &rcar_sound;
+/delete-node/ &sdhi2;
+/delete-node/ &sound_card;
+/delete-node/ &vin0;
+/delete-node/ &vin1;
+/delete-node/ &vin2;
+/delete-node/ &vin3;
+/delete-node/ &vin4;
+/delete-node/ &vin5;
+/delete-node/ &vin6;
+/delete-node/ &vin7;
+/delete-node/ &vspb;
+/delete-node/ &vspd0;
+/delete-node/ &vspd1;
+/delete-node/ &vspd2;
+/delete-node/ &vspi0;
+
+/ {
+ /delete-node/ hdmi0-out;
+};
+
+/ {
+ soc {
+ /delete-node/ fdp1 at fe940000;
+ };
+};
--
2.17.1
More information about the U-Boot
mailing list