[PATCH] net: fec: Get rid of FEC_ENET_ENABLE_[TR]XC_DELAY
Marek Vasut
marex at denx.de
Tue Jan 19 00:57:05 CET 2021
The FEC_ENET_ENABLE_.XC_DELAY setting is only used by one system which
supports OF control, correctly set the rgmii-id PHY mode in the DT and
then determine whether or not to enable the FEC RXC/TXC internal delay
based on the PHY mode.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
arch/arm/dts/fsl-imx8qm-apalis.dts | 2 +-
arch/arm/dts/fsl-imx8qxp-apalis.dts | 2 +-
drivers/net/fec_mxc.c | 14 ++++++--------
include/configs/apalis-imx8.h | 3 ---
include/configs/apalis-imx8x.h | 3 ---
5 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/arch/arm/dts/fsl-imx8qm-apalis.dts b/arch/arm/dts/fsl-imx8qm-apalis.dts
index 5187b794527..0d8d3b3e8e8 100644
--- a/arch/arm/dts/fsl-imx8qm-apalis.dts
+++ b/arch/arm/dts/fsl-imx8qm-apalis.dts
@@ -503,7 +503,7 @@
pinctrl-0 = <&pinctrl_fec1>;
fsl,magic-packet;
phy-handle = <ðphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 11 1>;
status = "okay";
diff --git a/arch/arm/dts/fsl-imx8qxp-apalis.dts b/arch/arm/dts/fsl-imx8qxp-apalis.dts
index 6bd231b2834..9cb3d3a809b 100644
--- a/arch/arm/dts/fsl-imx8qxp-apalis.dts
+++ b/arch/arm/dts/fsl-imx8qxp-apalis.dts
@@ -229,7 +229,7 @@
pinctrl-0 = <&pinctrl_fec1>;
fsl,magic-packet;
phy-handle = <ðphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-duration = <10>;
phy-reset-post-delay = <150>;
phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index bb55be9a267..73fc5f4c903 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -507,15 +507,13 @@ static int fec_open(struct eth_device *edev)
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
&fec->eth->ecntrl);
-#ifdef FEC_ENET_ENABLE_TXC_DELAY
- writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_TXC_DLY,
- &fec->eth->ecntrl);
-#endif
+ if (fec->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ fec->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ setbits_le32(&fec->eth->ecntrl, FEC_ECNTRL_TXC_DLY);
-#ifdef FEC_ENET_ENABLE_RXC_DELAY
- writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RXC_DLY,
- &fec->eth->ecntrl);
-#endif
+ if (fec->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ fec->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ setbits_le32(&fec->eth->ecntrl, FEC_ECNTRL_RXC_DLY);
#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
udelay(100);
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index db4e9011c0b..81441d7770f 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -21,9 +21,6 @@
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* Networking */
-#define FEC_QUIRK_ENET_MAC
-#define FEC_ENET_ENABLE_TXC_DELAY
-
#define CONFIG_TFTP_TSIZE
#define CONFIG_IPADDR 192.168.10.2
diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h
index db31c210f50..90bbeb926d3 100644
--- a/include/configs/apalis-imx8x.h
+++ b/include/configs/apalis-imx8x.h
@@ -25,9 +25,6 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
-#define FEC_ENET_ENABLE_TXC_DELAY
-#define FEC_ENET_ENABLE_RXC_DELAY
-
#define MEM_LAYOUT_ENV_SETTINGS \
"kernel_addr_r=0x80280000\0" \
"fdt_addr_r=0x83100000\0" \
--
2.29.2
More information about the U-Boot
mailing list