[PATCH v2 16/21] sunxi: Add H616 FEL support

[Samuel Holland]

On 1/11/21 2:11 PM, Jernej Skrabec wrote:
> H616 uses different address for reset. Add it.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> ---
>  arch/arm/cpu/armv8/fel_utils.S | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv8/fel_utils.S b/arch/arm/cpu/armv8/fel_utils.S
> index 9510dcd9e4c1..2dbd4b365221 100644
> --- a/arch/arm/cpu/armv8/fel_utils.S
> +++ b/arch/arm/cpu/armv8/fel_utils.S
> @@ -40,7 +40,10 @@ ENTRY(return_to_fel)
>  	str	w2, [x1]
>  
>  	ldr	x0, =0xfa50392f		// CPU hotplug magic
> -#ifdef CONFIG_MACH_SUN50I_H6
> +#ifdef CONFIG_MACH_SUN50I_H616
> +	ldr	x2, =(SUNXI_RTC_BASE + 0x5c0)

This is more accurately (SUNXI_R_CPUCFG_BASE + 0x1c0).

This is noticeable in secure mode, where the RTC is accessible but
R_CPUCFG is not.

Cheers,
Samuel

> +	str	w0, [x2], #0x4
> +#elif CONFIG_MACH_SUN50I_H6
>  	ldr	x2, =(SUNXI_RTC_BASE + 0x1b8)	// BOOT_CPU_HP_FLAG_REG
>  	str	w0, [x2], #0x4
>  #else
>