[patch v3 3/9] ockchip: video: edp: Change interrupt polarity configuration

[Kever Yang]

Hi Arnaud,
    Please correct the typo in subject line.

Thanks,
- Kever

Arnaud Patard <arnaud.patard at rtp-net.org> 于2020年11月20日周五 下午9:30写道：

> The linux code is setting polarity configuration to 3 but
> uboot code is setting it to 1. Change the configuration to match the
> linux configuration
>
> Signed-off-by: Arnaud Patard <arnaud.patard at rtp-net.org>
> Index: u-boot/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
> ===================================================================
> --- u-boot.orig/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
> +++ u-boot/arch/arm/include/asm/arch-rockchip/edp_rk3288.h
> @@ -297,7 +297,9 @@ check_member(rk3288_edp, pll_reg_5, 0xa0
>
>  /* int_ctl */
>  #define SOFT_INT_CTRL                          (0x1 << 2)
> -#define INT_POL                                        (0x1 << 0)
> +#define INT_POL1                               (0x1 << 1)
> +#define INT_POL0                               (0x1 << 0)
> +#define INT_POL                                        (INT_POL0 |
> INT_POL1)
>
>  /* sys_ctl_1 */
>  #define DET_STA                                        (0x1 << 2)
>
>
>