[PATCH 1/2] board: Atmel: Add SAMA5D27 giant board
Greg Gallagher
greg at embeddedgreg.com
Thu Jan 21 14:37:33 CET 2021
On Thu, Jan 21, 2021 at 2:19 AM <Eugen.Hristev at microchip.com> wrote:
> On 21.01.2021 00:38, Greg Gallagher wrote:
> > Giant board is a tiny SBC based on the Adafruit Feather form factor,
> > created by groboards it contains a SAMA5D2 processor (SAMA5D27),
> > 128 MB of RAM and a microSD card for storage.
> >
> > Signed-off-by: Greg Gallagher <greg at embeddedgreg.com>
> > ---
>
> Hi Greg,
>
> This patch [1/2] ARM: at91: spl: add spl_early_init for sama52d platforms
>
> has disappeared from your series. Do you still need it and forgot to
> send it ?
>
> Thank you for the patch,
> Eugen
> >
> > arch/arm/dts/Makefile | 3 +-
> > arch/arm/dts/at91-sama5d27_giantboard.dts | 128 ++++++++++++++++++++++
> > board/atmel/sama5d27_som1_ek/MAINTAINERS | 6 +
> > configs/sama5d27_giantboard_defconfig | 97 ++++++++++++++++
> > 4 files changed, 233 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/dts/at91-sama5d27_giantboard.dts
> > create mode 100644 configs/sama5d27_giantboard_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index e320c2254e..8a6a8bcee3 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -905,7 +905,8 @@ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
> > at91-sama5d2_xplained.dtb
> >
> > dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
> > - at91-sama5d27_som1_ek.dtb
> > + at91-sama5d27_som1_ek.dtb \
> > + at91-sama5d27_giantboard.dtb
> >
> > dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \
> > at91-sama5d27_wlsom1_ek.dtb
> > diff --git a/arch/arm/dts/at91-sama5d27_giantboard.dts
> b/arch/arm/dts/at91-sama5d27_giantboard.dts
> > new file mode 100644
> > index 0000000000..e81ca60ca0
> > --- /dev/null
> > +++ b/arch/arm/dts/at91-sama5d27_giantboard.dts
> > @@ -0,0 +1,128 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * at91-sama5d27_giantboard.dts - Device Tree file for Giant Board
> > + *
> > + * Copyright (C) 2020 Greg Gallagher <greg at embeddedgreg.com>
> > + *
> > + * Derived from at91-sama5d27_som1_ek.dts
> > + *
> > + * Copyright (C) 2017 Microchip Corporation
> > + * Wenyou Yang <wenyou.yang at microchip.com>
> > + */
> > +/dts-v1/;
> > +#include "sama5d2.dtsi"
> > +#include "sama5d2-pinfunc.h"
> > +
> > +/ {
> > + model = "Giant Board";
> > + compatible = "atmel,sama5d27-giantboard", "atmel,sama5d2",
> "atmel,sama5";
> > +
> > + memory {
> > + reg = <0x20000000 0x8000000>;
> > + };
> > +
> > + chosen {
> > + u-boot,dm-pre-reloc;
> > + stdout-path = &uart1;
> > + };
> > +
> > + ahb {
> > + sdmmc1: sdio-host at b0000000 {
> > + bus-width = <4>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default
> &pinctrl_sdmmc1_ck_cd_default>;
> > + status = "okay";
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + apb {
> > +
> > + uart1: serial at f8020000 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1_default>;
> > + status = "okay";
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + i2c0: i2c at f8028000 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c0_default>;
> > + status = "okay";
> > + };
> > +
> > + i2c1: i2c at fc028000 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1_default>;
> > + status = "okay";
> > +
> > + pmic at 5b {
> > + compatible =
> "active-semi,act8945a";
> > + reg = <0x5b>;
> > + active-semi,vsel-low;
> > + status = "okay";
> > + };
> > + };
> > +
> > + pit: timer at f8048030 {
> > + status = "okay";
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + sfr: sfr at f8030000 {
> > + status = "okay";
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + pioA: gpio at fc038000 {
> > + pinctrl {
> > +
> > + pinctrl_sdmmc1_cmd_dat_default:
> sdmmc1_cmd_dat_default {
> > + pinmux =
> <PIN_PA28__SDMMC1_CMD>,
> > +
> <PIN_PA18__SDMMC1_DAT0>,
> > +
> <PIN_PA19__SDMMC1_DAT1>,
> > +
> <PIN_PA20__SDMMC1_DAT2>,
> > +
> <PIN_PA21__SDMMC1_DAT3>;
> > + bias-pull-up;
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + pinctrl_sdmmc1_ck_cd_default:
> sdmmc1_ck_cd_default {
> > + pinmux =
> <PIN_PA22__SDMMC1_CK>,
> > +
> <PIN_PA30__SDMMC1_CD>;
> > + bias-disable;
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + pinctrl_uart1_default:
> uart1_default {
> > + pinmux =
> <PIN_PD2__URXD1>,
> > +
> <PIN_PD3__UTXD1>;
> > + bias-disable;
> > + u-boot,dm-pre-reloc;
> > + };
> > +
> > + pinctrl_i2c0_default:
> i2c0_default {
> > + pinmux =
> <PIN_PD21__TWD0>,
> > +
> <PIN_PD22__TWCK0>;
> > + bias-disable;
> > + };
> > +
> > + pinctrl_i2c1_default:
> i2c1_default {
> > + pinmux = <PIN_PD4__TWD1>,
> > +
> <PIN_PD5__TWCK1>;
> > + bias-disable;
> > + };
> > +
> > + pinctrl_usb_default: usb_default
> {
> > + pinmux =
> <PIN_PB10__GPIO>;
> > + bias-disable;
> > + };
> > +
> > + pinctrl_usba_vbus: usba_vbus {
> > + pinmux =
> <PIN_PA31__GPIO>;
> > + bias-disable;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +};
> > diff --git a/board/atmel/sama5d27_som1_ek/MAINTAINERS
> b/board/atmel/sama5d27_som1_ek/MAINTAINERS
> > index f2d2f49db3..ba2f31e6c4 100644
> > --- a/board/atmel/sama5d27_som1_ek/MAINTAINERS
> > +++ b/board/atmel/sama5d27_som1_ek/MAINTAINERS
> > @@ -6,3 +6,9 @@ F: include/configs/sama5d27_som1_ek.h
> > F: configs/sama5d27_som1_ek_mmc_defconfig
> > F: configs/sama5d27_som1_ek_mmc1_defconfig
> > F: configs/sama5d27_som1_ek_qspiflash_defconfig
> > +
> > +SAMA5D27 GIANT BOARD
> > +M: Greg Gallagher <greg at embeddedgreg.com>
> > +S: Maintained
> > +F: configs/sama5d27_giantboard_defconfig
> > +F: arch/arm/dts/at91-sama5d27_giantboard.dts
> > diff --git a/configs/sama5d27_giantboard_defconfig
> b/configs/sama5d27_giantboard_defconfig
> > new file mode 100644
> > index 0000000000..4e55a62625
> > --- /dev/null
> > +++ b/configs/sama5d27_giantboard_defconfig
> > @@ -0,0 +1,97 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_CPU_INIT=y
> > +CONFIG_ARCH_AT91=y
> > +CONFIG_CMDLINE=y
> > +CONFIG_SYS_TEXT_BASE=0x23f00000
> > +CONFIG_TARGET_SAMA5D27_SOM1_EK=y
> > +CONFIG_SAMA5D27_GIANTBOARD=y
> > +CONFIG_SPL_GPIO_SUPPORT=y
> > +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_SYS_MALLOC_F_LEN=0x2000
> > +CONFIG_SPL_MMC_SUPPORT=y
> > +CONFIG_SPL_SERIAL_SUPPORT=y
> > +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> > +CONFIG_ENV_SIZE=0x4000
> > +CONFIG_NR_DRAM_BANKS=1
> > +CONFIG_SPL=y
> > +CONFIG_DEBUG_UART_BOARD_INIT=y
> > +CONFIG_DEBUG_UART_BASE=0xf8020000
> > +CONFIG_DEBUG_UART_CLOCK=82000000
> > +CONFIG_SPL_FAT_SUPPORT=y
> > +CONFIG_SPL_FS_FAT=y
> > +CONFIG_SYS_BOARD="giantboard"
> > +CONFIG_SYS_BOARD_NAME="giantboard"
> > +CONFIG_SPL_LIBDISK_SUPPORT=y
> > +CONFIG_DEBUG_UART=y
> > +CONFIG_ENV_VARS_UBOOT_CONFIG=y
> > +CONFIG_FIT=y
> > +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
> > +CONFIG_SD_BOOT=y
> > +CONFIG_BOOTDELAY=3
> > +CONFIG_USE_BOOTARGS=y
> > +CONFIG_MISC_INIT_R=y
> > +CONFIG_BOARD_EARLY_INIT_F=y
> > +# CONFIG_DISPLAY_BOARDINFO is not set
> > +CONFIG_SPL_TEXT_BASE=0x200000
> > +CONFIG_SPL_SEPARATE_BSS=y
> > +CONFIG_HUSH_PARSER=y
> > +CONFIG_AUTOBOOT_KEYED=y
> > +CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
> > +CONFIG_AUTOBOOT_STOP_STR=" "
> > +CONFIG_AUTOBOOT_KEYED_CTRLC=y
> > +CONFIG_CMD_BOOTZ=y
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_I2C=y
> > +# CONFIG_CMD_LOADS is not set
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_PART=y
> > +CONFIG_CMD_SF=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_EXT4=y
> > +CONFIG_CMD_FAT=y
> > +CONFIG_CMD_FS_GENERIC=y
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_SPL_OF_CONTROL=y
> > +CONFIG_OF_LIBFDT=y
> > +CONFIG_OF_LIBFDT_OVERLAY=y
> > +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_giantboard"
> > +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
> > +CONFIG_ENV_IS_IN_FAT=y
> > +CONFIG_DM=y
> > +CONFIG_SPL_DM=y
> > +CONFIG_SPL_DM_SEQ_ALIAS=y
> > +CONFIG_CLK=y
> > +CONFIG_SPL_CLK=y
> > +CONFIG_CLK_AT91=y
> > +CONFIG_AT91_UTMI=y
> > +CONFIG_AT91_H32MX=y
> > +CONFIG_AT91_GENERIC_CLK=y
> > +CONFIG_DM_GPIO=y
> > +CONFIG_ATMEL_PIO4=y
> > +CONFIG_DM_I2C=y
> > +CONFIG_SYS_I2C_AT91=y
> > +CONFIG_DM_MMC=y
> > +CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_ATMEL=y
> > +CONFIG_DM_SPI_FLASH=y
> > +CONFIG_SPI_FLASH=y
> > +# CONFIG_NET is not set
> > +CONFIG_PINCTRL=y
> > +CONFIG_SPL_PINCTRL=y
> > +CONFIG_PINCTRL_AT91PIO4=y
> > +CONFIG_DM_SERIAL=y
> > +CONFIG_DEBUG_UART_ATMEL=y
> > +CONFIG_DEBUG_UART_ANNOUNCE=y
> > +CONFIG_ATMEL_USART=y
> > +CONFIG_SPI=y
> > +CONFIG_DM_SPI=y
> > +CONFIG_TIMER=y
> > +CONFIG_SPL_TIMER=y
> > +CONFIG_ATMEL_PIT_TIMER=y
> > +CONFIG_USB=y
> > +CONFIG_DM_USB=y
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_USB_GADGET_ATMEL_USBA=y
> > --
> > 2.25.1
Hi Eugen,
Sorry mishap with patman. I will resend the whole series shortly.
Thanks for taking the time to review
Greg
>
>
>
More information about the U-Boot
mailing list