[PATCH v2 11/21] sunxi: Add H616 DRAM support
Andre Przywara
andre.przywara at arm.com
Fri Jan 22 19:06:13 CET 2021
On Mon, 11 Jan 2021 21:11:43 +0100
Jernej Skrabec <jernej.skrabec at siol.net> wrote:
> Allwinner H616 supports many types of DRAM. Most notably it supports
> LPDDR4. However, all commercially available boards at this time use
> only DDR3, so this commit adds only DDR3 support.
>
> Controller and MBUS are very similar to H6 but PHY is completely
> unknown.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
Jernej, many many thanks for pulling this off! Having this driver is
probably the most important piece of the SoC support puzzle.
I don't dare to "review" this driver, though I have looked at
certain parts and the code and approaches look similar
to those of related SoCs (minus the PHY, of course).
I am using this extensively on my OrangePi Zero2, and though I have
seen the occasional size mis-detection (1GB detected as 2GB or 4GB)
with *earlier* versions of the driver, this latest drop here didn't show
any issues so far. Will keep an eye on that.
Acked-by: Andre Przywara <andre.przywara at arm.com>
Thanks!
Andre
> ---
> arch/arm/include/asm/arch-sunxi/dram.h | 2 +
> .../include/asm/arch-sunxi/dram_sun50i_h616.h | 159 +++
> arch/arm/mach-sunxi/Kconfig | 43 +
> arch/arm/mach-sunxi/Makefile | 2 +
> arch/arm/mach-sunxi/dram_sun50i_h616.c | 1023 +++++++++++++++++
> arch/arm/mach-sunxi/dram_timings/Makefile | 2 +
> .../mach-sunxi/dram_timings/h616_ddr3_1333.c | 94 ++
> 7 files changed, 1325 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> create mode 100644 arch/arm/mach-sunxi/dram_sun50i_h616.c
> create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
>
> diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
> index 8002b7efdc19..c3b3e1f512b2 100644
> --- a/arch/arm/include/asm/arch-sunxi/dram.h
> +++ b/arch/arm/include/asm/arch-sunxi/dram.h
> @@ -29,6 +29,8 @@
> #include <asm/arch/dram_sun9i.h>
> #elif defined(CONFIG_MACH_SUN50I_H6)
> #include <asm/arch/dram_sun50i_h6.h>
> +#elif defined(CONFIG_MACH_SUN50I_H616)
> +#include <asm/arch/dram_sun50i_h616.h>
> #else
> #include <asm/arch/dram_sun4i.h>
> #endif
> diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> new file mode 100644
> index 000000000000..134679d55205
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h
> @@ -0,0 +1,159 @@
> +/*
> + * H616 dram controller register and constant defines
> + *
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + *
> + * Based on H6 one, which is:
> + * (C) Copyright 2017 Icenowy Zheng <icenowy at aosc.io>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _SUNXI_DRAM_SUN50I_H616_H
> +#define _SUNXI_DRAM_SUN50I_H616_H
> +
> +#include <stdbool.h>
> +#ifndef __ASSEMBLY__
> +#include <linux/bitops.h>
> +#endif
> +
> +enum sunxi_dram_type {
> + SUNXI_DRAM_TYPE_DDR3 = 3,
> + SUNXI_DRAM_TYPE_DDR4,
> + SUNXI_DRAM_TYPE_LPDDR3 = 7,
> + SUNXI_DRAM_TYPE_LPDDR4
> +};
> +
> +/* MBUS part is largely the same as in H6, except for one special register */
> +struct sunxi_mctl_com_reg {
> + u32 cr; /* 0x000 control register */
> + u8 reserved_0x004[4]; /* 0x004 */
> + u32 unk_0x008; /* 0x008 */
> + u32 tmr; /* 0x00c timer register */
> + u8 reserved_0x010[4]; /* 0x010 */
> + u32 unk_0x014; /* 0x014 */
> + u8 reserved_0x018[8]; /* 0x018 */
> + u32 maer0; /* 0x020 master enable register 0 */
> + u32 maer1; /* 0x024 master enable register 1 */
> + u32 maer2; /* 0x028 master enable register 2 */
> + u8 reserved_0x02c[468]; /* 0x02c */
> + u32 bwcr; /* 0x200 bandwidth control register */
> + u8 reserved_0x204[12]; /* 0x204 */
> + /*
> + * The last master configured by BSP libdram is at 0x49x, so the
> + * size of this struct array is set to 41 (0x29) now.
> + */
> + struct {
> + u32 cfg0; /* 0x0 */
> + u32 cfg1; /* 0x4 */
> + u8 reserved_0x8[8]; /* 0x8 */
> + } master[41]; /* 0x210 + index * 0x10 */
> + u8 reserved_0x4a0[96]; /* 0x4a0 */
> + u32 unk_0x500; /* 0x500 */
> +};
> +check_member(sunxi_mctl_com_reg, unk_0x500, 0x500);
> +
> +/*
> + * Controller registers seems to be the same or at least very similar
> + * to those in H6.
> + */
> +struct sunxi_mctl_ctl_reg {
> + u32 mstr; /* 0x000 */
> + u32 statr; /* 0x004 unused */
> + u32 mstr1; /* 0x008 unused */
> + u32 clken; /* 0x00c */
> + u32 mrctrl0; /* 0x010 unused */
> + u32 mrctrl1; /* 0x014 unused */
> + u32 mrstatr; /* 0x018 unused */
> + u32 mrctrl2; /* 0x01c unused */
> + u32 derateen; /* 0x020 unused */
> + u32 derateint; /* 0x024 unused */
> + u8 reserved_0x028[8]; /* 0x028 */
> + u32 pwrctl; /* 0x030 unused */
> + u32 pwrtmg; /* 0x034 unused */
> + u32 hwlpctl; /* 0x038 unused */
> + u8 reserved_0x03c[20]; /* 0x03c */
> + u32 rfshctl0; /* 0x050 unused */
> + u32 rfshctl1; /* 0x054 unused */
> + u8 reserved_0x058[8]; /* 0x05c */
> + u32 rfshctl3; /* 0x060 */
> + u32 rfshtmg; /* 0x064 */
> + u8 reserved_0x068[104]; /* 0x068 */
> + u32 init[8]; /* 0x0d0 */
> + u32 dimmctl; /* 0x0f0 unused */
> + u32 rankctl; /* 0x0f4 */
> + u8 reserved_0x0f8[8]; /* 0x0f8 */
> + u32 dramtmg[17]; /* 0x100 */
> + u8 reserved_0x144[60]; /* 0x144 */
> + u32 zqctl[3]; /* 0x180 */
> + u32 zqstat; /* 0x18c unused */
> + u32 dfitmg0; /* 0x190 */
> + u32 dfitmg1; /* 0x194 */
> + u32 dfilpcfg[2]; /* 0x198 unused */
> + u32 dfiupd[3]; /* 0x1a0 */
> + u32 reserved_0x1ac; /* 0x1ac */
> + u32 dfimisc; /* 0x1b0 */
> + u32 dfitmg2; /* 0x1b4 unused */
> + u32 dfitmg3; /* 0x1b8 unused */
> + u32 dfistat; /* 0x1bc */
> + u32 dbictl; /* 0x1c0 */
> + u8 reserved_0x1c4[60]; /* 0x1c4 */
> + u32 addrmap[12]; /* 0x200 */
> + u8 reserved_0x230[16]; /* 0x230 */
> + u32 odtcfg; /* 0x240 */
> + u32 odtmap; /* 0x244 */
> + u8 reserved_0x248[8]; /* 0x248 */
> + u32 sched[2]; /* 0x250 */
> + u8 reserved_0x258[180]; /* 0x258 */
> + u32 dbgcmd; /* 0x30c unused */
> + u32 dbgstat; /* 0x310 unused */
> + u8 reserved_0x314[12]; /* 0x314 */
> + u32 swctl; /* 0x320 */
> + u32 swstat; /* 0x324 */
> + u8 reserved_0x328[7768];/* 0x328 */
> + u32 unk_0x2180; /* 0x2180 */
> + u8 reserved_0x2184[188];/* 0x2184 */
> + u32 unk_0x2240; /* 0x2240 */
> + u8 reserved_0x2244[3900];/* 0x2244 */
> + u32 unk_0x3180; /* 0x3180 */
> + u8 reserved_0x3184[188];/* 0x3184 */
> + u32 unk_0x3240; /* 0x3240 */
> + u8 reserved_0x3244[3900];/* 0x3244 */
> + u32 unk_0x4180; /* 0x4180 */
> + u8 reserved_0x4184[188];/* 0x4184 */
> + u32 unk_0x4240; /* 0x4240 */
> +};
> +check_member(sunxi_mctl_ctl_reg, swstat, 0x324);
> +check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240);
> +
> +#define MSTR_DEVICETYPE_DDR3 BIT(0)
> +#define MSTR_DEVICETYPE_LPDDR2 BIT(2)
> +#define MSTR_DEVICETYPE_LPDDR3 BIT(3)
> +#define MSTR_DEVICETYPE_DDR4 BIT(4)
> +#define MSTR_DEVICETYPE_MASK GENMASK(5, 0)
> +#define MSTR_2TMODE BIT(10)
> +#define MSTR_BUSWIDTH_FULL (0 << 12)
> +#define MSTR_BUSWIDTH_HALF (1 << 12)
> +#define MSTR_ACTIVE_RANKS(x) (((x == 2) ? 3 : 1) << 24)
> +#define MSTR_BURST_LENGTH(x) (((x) >> 1) << 16)
> +
> +struct dram_para {
> + u32 clk;
> + enum sunxi_dram_type type;
> + u8 cols;
> + u8 rows;
> + u8 ranks;
> + u8 bus_full_width;
> +};
> +
> +
> +static inline int ns_to_t(int nanoseconds)
> +{
> + const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
> +
> + return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
> +}
> +
> +void mctl_set_timing_params(struct dram_para *para);
> +
> +#endif /* _SUNXI_DRAM_SUN50I_H616_H */
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index b23ed695cd1c..a8571d180259 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -48,6 +48,46 @@ config DRAM_SUN50I_H6
> Select this dram controller driver for some sun50i platforms,
> like H6.
>
> +config DRAM_SUN50I_H616
> + bool
> + help
> + Select this dram controller driver for some sun50i platforms,
> + like H616.
> +
> +if DRAM_SUN50I_H616
> +config DRAM_SUN50I_H616_WRITE_LEVELING
> + bool "H616 DRAM write leveling"
> + ---help---
> + Select this when DRAM on your H616 board needs write leveling.
> +
> +config DRAM_SUN50I_H616_READ_CALIBRATION
> + bool "H616 DRAM read calibration"
> + ---help---
> + Select this when DRAM on your H616 board needs read calibration.
> +
> +config DRAM_SUN50I_H616_READ_TRAINING
> + bool "H616 DRAM read training"
> + ---help---
> + Select this when DRAM on your H616 board needs read training.
> +
> +config DRAM_SUN50I_H616_WRITE_TRAINING
> + bool "H616 DRAM write training"
> + ---help---
> + Select this when DRAM on your H616 board needs write training.
> +
> +config DRAM_SUN50I_H616_BIT_DELAY_COMPENSATION
> + bool "H616 DRAM bit delay compensation"
> + ---help---
> + Select this when DRAM on your H616 board needs bit delay
> + compensation.
> +
> +config DRAM_SUN50I_H616_UNKNOWN_FEATURE
> + bool "H616 DRAM unknown feature"
> + ---help---
> + Select this when DRAM on your H616 board needs this unknown
> + feature.
> +endif
> +
> config SUN6I_P2WI
> bool "Allwinner sun6i internal P2WI controller"
> help
> @@ -424,6 +464,7 @@ config DRAM_CLK
> MACH_SUN8I_V3S
> default 672 if MACH_SUN50I
> default 744 if MACH_SUN50I_H6
> + default 720 if MACH_SUN50I_H616
> ---help---
> Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
> must be a multiple of 24. For the sun9i (A80), the tested values
> @@ -440,6 +481,7 @@ endif
>
> config DRAM_ZQ
> int "sunxi dram zq value"
> + depends on !MACH_SUN50I_H616
> default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || \
> MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_A83T
> default 127 if MACH_SUN7I
> @@ -457,6 +499,7 @@ config DRAM_ODT_EN
> default y if MACH_SUN8I_R40
> default y if MACH_SUN50I
> default y if MACH_SUN50I_H6
> + default y if MACH_SUN50I_H616
> ---help---
> Select this to enable dram odt (on die termination).
>
> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
> index b8aca43d6630..3f081d92f379 100644
> --- a/arch/arm/mach-sunxi/Makefile
> +++ b/arch/arm/mach-sunxi/Makefile
> @@ -40,4 +40,6 @@ obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
> obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
> obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o
> obj-$(CONFIG_DRAM_SUN50I_H6) += dram_timings/
> +obj-$(CONFIG_DRAM_SUN50I_H616) += dram_sun50i_h616.o
> +obj-$(CONFIG_DRAM_SUN50I_H616) += dram_timings/
> endif
> diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
> new file mode 100644
> index 000000000000..ef5876971ca1
> --- /dev/null
> +++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
> @@ -0,0 +1,1023 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * sun50i H616 platform dram controller driver
> + *
> + * While controller is very similar to that in H6, PHY is completely
> + * unknown. That's why this driver has plenty of magic numbers. Some
> + * meaning was nevertheless deduced from strings found in boot0 and
> + * known meaning of some dram parameters.
> + * This driver only supports DDR3 memory and omits logic for all
> + * other supported types supported by hardware.
> + *
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + *
> + */
> +#include <common.h>
> +#include <init.h>
> +#include <log.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/dram.h>
> +#include <asm/arch/cpu.h>
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/kconfig.h>
> +
> +enum {
> + MBUS_QOS_LOWEST = 0,
> + MBUS_QOS_LOW,
> + MBUS_QOS_HIGH,
> + MBUS_QOS_HIGHEST
> +};
> +
> +inline void mbus_configure_port(u8 port,
> + bool bwlimit,
> + bool priority,
> + u8 qos,
> + u8 waittime,
> + u8 acs,
> + u16 bwl0,
> + u16 bwl1,
> + u16 bwl2)
> +{
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> +
> + const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
> + | (priority ? (1 << 1) : 0)
> + | ((qos & 0x3) << 2)
> + | ((waittime & 0xf) << 4)
> + | ((acs & 0xff) << 8)
> + | (bwl0 << 16) );
> + const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
> +
> + debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
> + writel_relaxed(cfg0, &mctl_com->master[port].cfg0);
> + writel_relaxed(cfg1, &mctl_com->master[port].cfg1);
> +}
> +
> +#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \
> + mbus_configure_port(port, bwlimit, false, \
> + MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
> +
> +static void mctl_set_master_priority(void)
> +{
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> +
> + /* enable bandwidth limit windows and set windows size 1us */
> + writel(399, &mctl_com->tmr);
> + writel(BIT(16), &mctl_com->bwcr);
> +
> + MBUS_CONF( 0, true, HIGHEST, 0, 256, 128, 100);
> + MBUS_CONF( 1, true, HIGH, 0, 1536, 1400, 256);
> + MBUS_CONF( 2, true, HIGHEST, 0, 512, 256, 96);
> + MBUS_CONF( 3, true, HIGH, 0, 256, 100, 80);
> + MBUS_CONF( 4, true, HIGH, 2, 8192, 5500, 5000);
> + MBUS_CONF( 5, true, HIGH, 2, 100, 64, 32);
> + MBUS_CONF( 6, true, HIGH, 2, 100, 64, 32);
> + MBUS_CONF( 8, true, HIGH, 0, 256, 128, 64);
> + MBUS_CONF(11, true, HIGH, 0, 256, 128, 100);
> + MBUS_CONF(14, true, HIGH, 0, 1024, 256, 64);
> + MBUS_CONF(16, true, HIGHEST, 6, 8192, 2800, 2400);
> + MBUS_CONF(21, true, HIGHEST, 6, 2048, 768, 512);
> + MBUS_CONF(25, true, HIGHEST, 0, 100, 64, 32);
> + MBUS_CONF(26, true, HIGH, 2, 8192, 5500, 5000);
> + MBUS_CONF(37, true, HIGH, 0, 256, 128, 64);
> + MBUS_CONF(38, true, HIGH, 2, 100, 64, 32);
> + MBUS_CONF(39, true, HIGH, 2, 8192, 5500, 5000);
> + MBUS_CONF(40, true, HIGH, 2, 100, 64, 32);
> +
> + dmb();
> +}
> +
> +static void mctl_sys_init(struct dram_para *para)
> +{
> + struct sunxi_ccm_reg * const ccm =
> + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> +
> + /* Put all DRAM-related blocks to reset state */
> + clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
> + clrbits_le32(&ccm->mbus_cfg, MBUS_RESET);
> + clrbits_le32(&ccm->dram_gate_reset, BIT(GATE_SHIFT));
> + udelay(5);
> + clrbits_le32(&ccm->dram_gate_reset, BIT(RESET_SHIFT));
> + clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
> + clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
> +
> + udelay(5);
> +
> + /* Set PLL5 rate to doubled DRAM clock rate */
> + writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN | CCM_PLL5_OUT_EN |
> + CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
> + mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
> +
> + /* Configure DRAM mod clock */
> + writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
> + writel(BIT(RESET_SHIFT), &ccm->dram_gate_reset);
> + udelay(5);
> + setbits_le32(&ccm->dram_gate_reset, BIT(GATE_SHIFT));
> +
> + /* Disable all channels */
> + writel(0, &mctl_com->maer0);
> + writel(0, &mctl_com->maer1);
> + writel(0, &mctl_com->maer2);
> +
> + /* Configure MBUS and enable DRAM mod reset */
> + setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
> + setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
> +
> + clrbits_le32(&mctl_com->unk_0x500, BIT(25));
> +
> + setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
> + udelay(5);
> +
> + /* Unknown hack, which enables access of mctl_ctl regs */
> + writel(0x8000, &mctl_ctl->clken);
> +}
> +
> +static void mctl_set_addrmap(struct dram_para *para)
> +{
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> + u8 cols = para->cols;
> + u8 rows = para->rows;
> + u8 ranks = para->ranks;
> +
> + if (!para->bus_full_width)
> + cols -= 1;
> +
> + /* Ranks */
> + if (ranks == 2)
> + mctl_ctl->addrmap[0] = rows + cols - 3;
> + else
> + mctl_ctl->addrmap[0] = 0x1F;
> +
> + /* Banks, hardcoded to 8 banks now */
> + mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
> +
> + /* Columns */
> + mctl_ctl->addrmap[2] = 0;
> + switch (cols) {
> + case 7:
> + mctl_ctl->addrmap[3] = 0x1F1F1F00;
> + mctl_ctl->addrmap[4] = 0x1F1F;
> + break;
> + case 8:
> + mctl_ctl->addrmap[3] = 0x1F1F0000;
> + mctl_ctl->addrmap[4] = 0x1F1F;
> + break;
> + case 9:
> + mctl_ctl->addrmap[3] = 0x1F000000;
> + mctl_ctl->addrmap[4] = 0x1F1F;
> + break;
> + case 10:
> + mctl_ctl->addrmap[3] = 0;
> + mctl_ctl->addrmap[4] = 0x1F1F;
> + break;
> + case 11:
> + mctl_ctl->addrmap[3] = 0;
> + mctl_ctl->addrmap[4] = 0x1F00;
> + break;
> + case 12:
> + mctl_ctl->addrmap[3] = 0;
> + mctl_ctl->addrmap[4] = 0;
> + break;
> + default:
> + panic("Unsupported DRAM configuration: column number invalid\n");
> + }
> +
> + /* Rows */
> + mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
> + switch (rows) {
> + case 13:
> + mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
> + mctl_ctl->addrmap[7] = 0x0F0F;
> + break;
> + case 14:
> + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
> + mctl_ctl->addrmap[7] = 0x0F0F;
> + break;
> + case 15:
> + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
> + mctl_ctl->addrmap[7] = 0x0F0F;
> + break;
> + case 16:
> + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
> + mctl_ctl->addrmap[7] = 0x0F0F;
> + break;
> + case 17:
> + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
> + mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
> + break;
> + case 18:
> + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
> + mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
> + break;
> + default:
> + panic("Unsupported DRAM configuration: row number invalid\n");
> + }
> +
> + /* Bank groups, DDR4 only */
> + mctl_ctl->addrmap[8] = 0x3F3F;
> +}
> +
> +static const u8 phy_init[] = {
> + 0x07, 0x0b, 0x02, 0x16, 0x0d, 0x0e, 0x14, 0x19,
> + 0x0a, 0x15, 0x03, 0x13, 0x04, 0x0c, 0x10, 0x06,
> + 0x0f, 0x11, 0x1a, 0x01, 0x12, 0x17, 0x00, 0x08,
> + 0x09, 0x05, 0x18
> +};
> +
> +static void mctl_phy_configure_odt(void)
> +{
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x388);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x38c);
> +
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x3c8);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x3cc);
> +
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x408);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x40c);
> +
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x448);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x44c);
> +
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x340);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x344);
> +
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x348);
> + writel_relaxed(0xe, SUNXI_DRAM_PHY0_BASE + 0x34c);
> +
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x380);
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x384);
> +
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x3c0);
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x3c4);
> +
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x400);
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x404);
> +
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x440);
> + writel_relaxed(0x8, SUNXI_DRAM_PHY0_BASE + 0x444);
> +
> + dmb();
> +}
> +
> +static bool mctl_phy_write_leveling(struct dram_para *para)
> +{
> + bool result = true;
> + u32 val;
> +
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0, 0x80);
> + writel(4, SUNXI_DRAM_PHY0_BASE + 0xc);
> + writel(0x40, SUNXI_DRAM_PHY0_BASE + 0x10);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
> +
> + if (para->bus_full_width)
> + val = 0xf;
> + else
> + val = 3;
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x188), val, val);
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
> +
> + val = readl(SUNXI_DRAM_PHY0_BASE + 0x258);
> + if (val == 0 || val == 0x3f)
> + result = false;
> + val = readl(SUNXI_DRAM_PHY0_BASE + 0x25c);
> + if (val == 0 || val == 0x3f)
> + result = false;
> + val = readl(SUNXI_DRAM_PHY0_BASE + 0x318);
> + if (val == 0 || val == 0x3f)
> + result = false;
> + val = readl(SUNXI_DRAM_PHY0_BASE + 0x31c);
> + if (val == 0 || val == 0x3f)
> + result = false;
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0);
> +
> + if (para->ranks == 2) {
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0, 0x40);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
> +
> + if (para->bus_full_width)
> + val = 0xf;
> + else
> + val = 3;
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x188), val, val);
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0);
> +
> + return result;
> +}
> +
> +static bool mctl_phy_read_calibration(struct dram_para *para)
> +{
> + bool result = true;
> + u32 val, tmp;
> +
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30, 0x20);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
> +
> + if (para->bus_full_width)
> + val = 0xf;
> + else
> + val = 3;
> +
> + while ((readl(SUNXI_DRAM_PHY0_BASE + 0x184) & val) != val) {
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x184) & 0x20) {
> + result = false;
> + break;
> + }
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30);
> +
> + if (para->ranks == 2) {
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30, 0x10);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
> +
> + while ((readl(SUNXI_DRAM_PHY0_BASE + 0x184) & val) != val) {
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x184) & 0x20) {
> + result = false;
> + break;
> + }
> + }
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 1);
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0x30);
> +
> + val = readl(SUNXI_DRAM_PHY0_BASE + 0x274) & 7;
> + tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x26c) & 7;
> + if (val < tmp)
> + val = tmp;
> + tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x32c) & 7;
> + if (val < tmp)
> + val = tmp;
> + tmp = readl(SUNXI_DRAM_PHY0_BASE + 0x334) & 7;
> + if (val < tmp)
> + val = tmp;
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x38, 0x7, (val + 2) & 7);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 0x20);
> +
> + return result;
> +}
> +
> +static bool mctl_phy_read_training(struct dram_para *para)
> +{
> + u32 val1, val2, *ptr1, *ptr2;
> + bool result = true;
> + int i;
> +
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3, 2);
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x804, 0x3f, 0xf);
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x808, 0x3f, 0xf);
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0xa04, 0x3f, 0xf);
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0xa08, 0x3f, 0xf);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 6);
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 1);
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x840), 0xc, 0xc);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x840) & 3)
> + result = false;
> +
> + if (para->bus_full_width) {
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xa40), 0xc, 0xc);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0xa40) & 3)
> + result = false;
> + }
> +
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x898);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x850);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x8bc);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x874);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> +
> + if (para->bus_full_width) {
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa98);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa50);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> +
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xabc);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xa74);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 3);
> +
> + if (para->ranks == 2) {
> + /* maybe last parameter should be 1? */
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3, 2);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 6);
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 1);
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x840), 0xc, 0xc);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x840) & 3)
> + result = false;
> +
> + if (para->bus_full_width) {
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xa40), 0xc, 0xc);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0xa40) & 3)
> + result = false;
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 3);
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 3);
> +
> + return result;
> +}
> +
> +static bool mctl_phy_write_training(struct dram_para *para)
> +{
> + u32 val1, val2, *ptr1, *ptr2;
> + bool result = true;
> + int i;
> +
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x134);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x138);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x19c);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x1a0);
> +
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc, 8);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x20);
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x8e0), 3, 3);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x8e0) & 0xc)
> + result = false;
> +
> + if (para->bus_full_width) {
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xae0), 3, 3);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0xae0) & 0xc)
> + result = false;
> + }
> +
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x938);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x8f0);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x95c);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x914);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> +
> + if (para->bus_full_width) {
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb38);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xaf0);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> + ptr1 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb5c);
> + ptr2 = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xb14);
> + for (i = 0; i < 9; i++) {
> + val1 = readl(&ptr1[i]);
> + val2 = readl(&ptr2[i]);
> + if (val1 - val2 <= 6)
> + result = false;
> + }
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x60);
> +
> + if (para->ranks == 2) {
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc, 4);
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x20);
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x8e0), 3, 3);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0x8e0) & 0xc)
> + result = false;
> +
> + if (para->bus_full_width) {
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0xae0), 3, 3);
> + if (readl(SUNXI_DRAM_PHY0_BASE + 0xae0) & 0xc)
> + result = false;
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x60);
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x198, 0xc);
> +
> + return result;
> +}
> +
> +static bool mctl_phy_bit_delay_compensation(struct dram_para *para)
> +{
> + u32 *ptr;
> + int i;
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 8);
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 0x10);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x484);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x16, ptr);
> + writel_relaxed(0x16, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x4d0);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x590);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x4cc);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x58c);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x4d8);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x1a, ptr);
> + writel_relaxed(0x1a, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x524);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x5e4);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x520);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x5e0);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x604);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x1a, ptr);
> + writel_relaxed(0x1a, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x650);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x710);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x64c);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x70c);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x658);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x1a, ptr);
> + writel_relaxed(0x1a, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x6a4);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x764);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x6a0);
> + writel_relaxed(0x1e, SUNXI_DRAM_PHY0_BASE + 0x760);
> +
> + dmb();
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 1);
> +
> + /* second part */
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x54, 0x80);
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x190, 4);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x480);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x10, ptr);
> + writel_relaxed(0x10, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x528);
> + writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x5e8);
> + writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x4c8);
> + writel_relaxed(0x18, SUNXI_DRAM_PHY0_BASE + 0x588);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x4d4);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x12, ptr);
> + writel_relaxed(0x12, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x52c);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x5ec);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x51c);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x5dc);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x600);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x12, ptr);
> + writel_relaxed(0x12, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x6a8);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x768);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x648);
> + writel_relaxed(0x1a, SUNXI_DRAM_PHY0_BASE + 0x708);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x654);
> + for (i = 0; i < 9; i++) {
> + writel_relaxed(0x14, ptr);
> + writel_relaxed(0x14, ptr + 0x30);
> + ptr += 2;
> + }
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x6ac);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x76c);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x69c);
> + writel_relaxed(0x1c, SUNXI_DRAM_PHY0_BASE + 0x75c);
> +
> + dmb();
> +
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x54, 0x80);
> +
> + return true;
> +}
> +
> +static bool mctl_phy_init(struct dram_para *para)
> +{
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> + u32 val, *ptr;
> + int i;
> +
> + if (para->bus_full_width)
> + val = 0xf;
> + else
> + val = 3;
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3c, 0xf, val);
> +
> + writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x14);
> + writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x35c);
> + writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x368);
> + writel(0xd, SUNXI_DRAM_PHY0_BASE + 0x374);
> +
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x18);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x360);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x36c);
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x378);
> +
> + writel(9, SUNXI_DRAM_PHY0_BASE + 0x1c);
> + writel(9, SUNXI_DRAM_PHY0_BASE + 0x364);
> + writel(9, SUNXI_DRAM_PHY0_BASE + 0x370);
> + writel(9, SUNXI_DRAM_PHY0_BASE + 0x37c);
> +
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0xc0);
> + for (i = 0; i < ARRAY_SIZE(phy_init); i++)
> + writel(phy_init[i], &ptr[i]);
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_UNKNOWN_FEATURE)) {
> + ptr = (u32*)(SUNXI_DRAM_PHY0_BASE + 0x780);
> + for (i = 0; i < 32; i++)
> + writel(0x16, &ptr[i]);
> + writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x78c);
> + writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7a4);
> + writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7b8);
> + writel(0x8, SUNXI_DRAM_PHY0_BASE + 0x7d4);
> + writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7dc);
> + writel(0xe, SUNXI_DRAM_PHY0_BASE + 0x7e0);
> + }
> +
> + writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x3dc);
> + writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x45c);
> +
> + if (IS_ENABLED(DRAM_ODT_EN))
> + mctl_phy_configure_odt();
> +
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 7, 0xa);
> +
> + if (para->clk <= 672)
> + writel(0xf, SUNXI_DRAM_PHY0_BASE + 0x20);
> + if (para->clk > 500) {
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x144, BIT(7));
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 0xe0);
> + } else {
> + setbits_le32(SUNXI_DRAM_PHY0_BASE + 0x144, BIT(7));
> + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 0xe0, 0x20);
> + }
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 8);
> +
> + mctl_await_completion((u32*)(SUNXI_DRAM_PHY0_BASE + 0x180), 4, 4);
> +
> + writel(0x37, SUNXI_DRAM_PHY0_BASE + 0x58);
> + clrbits_le32(&mctl_com->unk_0x500, 0x200);
> +
> + writel(0, &mctl_ctl->swctl);
> + setbits_le32(&mctl_ctl->dfimisc, 1);
> +
> + /* start DFI init */
> + setbits_le32(&mctl_ctl->dfimisc, 0x20);
> + writel(1, &mctl_ctl->swctl);
> + mctl_await_completion(&mctl_ctl->swstat, 1, 1);
> + /* poll DFI init complete */
> + mctl_await_completion(&mctl_ctl->dfistat, 1, 1);
> + writel(0, &mctl_ctl->swctl);
> + clrbits_le32(&mctl_ctl->dfimisc, 0x20);
> +
> + clrbits_le32(&mctl_ctl->pwrctl, 0x20);
> + writel(1, &mctl_ctl->swctl);
> + mctl_await_completion(&mctl_ctl->swstat, 1, 1);
> + mctl_await_completion(&mctl_ctl->statr, 3, 1);
> +
> + writel(0, &mctl_ctl->swctl);
> + clrbits_le32(&mctl_ctl->dfimisc, 1);
> +
> + writel(1, &mctl_ctl->swctl);
> + mctl_await_completion(&mctl_ctl->swstat, 1, 1);
> +
> + writel(0x1f14, &mctl_ctl->mrctrl1);
> + writel(0x80000030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(4, &mctl_ctl->mrctrl1);
> + writel(0x80001030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0x20, &mctl_ctl->mrctrl1);
> + writel(0x80002030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0, &mctl_ctl->mrctrl1);
> + writel(0x80003030, &mctl_ctl->mrctrl0);
> + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
> +
> + writel(0, SUNXI_DRAM_PHY0_BASE + 0x54);
> +
> + writel(0, &mctl_ctl->swctl);
> + clrbits_le32(&mctl_ctl->rfshctl3, 1);
> + writel(1, &mctl_ctl->swctl);
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_WRITE_LEVELING)) {
> + for (i = 0; i < 5; i++)
> + if (mctl_phy_write_leveling(para))
> + break;
> + if (i == 5) {
> + debug("write leveling failed!\n");
> + return false;
> + }
> + }
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION)) {
> + for (i = 0; i < 5; i++)
> + if (mctl_phy_read_calibration(para))
> + break;
> + if (i == 5) {
> + debug("read calibration failed!\n");
> + return false;
> + }
> + }
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_READ_TRAINING)) {
> + for (i = 0; i < 5; i++)
> + if (mctl_phy_read_training(para))
> + break;
> + if (i == 5) {
> + debug("read training failed!\n");
> + return false;
> + }
> + }
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_WRITE_TRAINING)) {
> + for (i = 0; i < 5; i++)
> + if (mctl_phy_write_training(para))
> + break;
> + if (i == 5) {
> + debug("write training failed!\n");
> + return false;
> + }
> + }
> +
> + if (IS_ENABLED(CONFIG_DRAM_SUN50I_H616_BIT_DELAY_COMPENSATION))
> + mctl_phy_bit_delay_compensation(para);
> +
> + clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x60, 4);
> +
> + return true;
> +}
> +
> +static bool mctl_ctrl_init(struct dram_para *para)
> +{
> + struct sunxi_mctl_com_reg * const mctl_com =
> + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> + u32 reg_val;
> +
> + clrsetbits_le32(&mctl_com->unk_0x500, BIT(24), 0x200);
> + writel(0x8000, &mctl_ctl->clken);
> +
> + setbits_le32(&mctl_com->unk_0x008, 0xff00);
> +
> + clrsetbits_le32(&mctl_ctl->sched[0], 0xff00, 0x3000);
> +
> + writel(0, &mctl_ctl->hwlpctl);
> +
> + setbits_le32(&mctl_com->unk_0x008, 0xff00);
> +
> + reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks);
> + reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
> + if (para->bus_full_width)
> + reg_val |= MSTR_BUSWIDTH_FULL;
> + else
> + reg_val |= MSTR_BUSWIDTH_HALF;
> + writel(BIT(31) | BIT(30) | reg_val, &mctl_ctl->mstr);
> +
> + if (para->ranks == 2)
> + writel(0x0303, &mctl_ctl->odtmap);
> + else
> + writel(0x0201, &mctl_ctl->odtmap);
> +
> + writel(0x06000400, &mctl_ctl->odtcfg);
> + writel(0x06000400, &mctl_ctl->unk_0x2240);
> + writel(0x06000400, &mctl_ctl->unk_0x3240);
> + writel(0x06000400, &mctl_ctl->unk_0x4240);
> +
> + setbits_le32(&mctl_com->cr, BIT(31));
> +
> + mctl_set_addrmap(para);
> +
> + mctl_set_timing_params(para);
> +
> + writel(0, &mctl_ctl->pwrctl);
> +
> + setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
> + setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
> + setbits_le32(&mctl_ctl->unk_0x2180, BIT(31) | BIT(30));
> + setbits_le32(&mctl_ctl->unk_0x3180, BIT(31) | BIT(30));
> + setbits_le32(&mctl_ctl->unk_0x4180, BIT(31) | BIT(30));
> +
> + setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
> + clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
> +
> + writel(0, &mctl_com->maer0);
> + writel(0, &mctl_com->maer1);
> + writel(0, &mctl_com->maer2);
> +
> + writel(0x20, &mctl_ctl->pwrctl);
> + setbits_le32(&mctl_ctl->clken, BIT(8));
> +
> + clrsetbits_le32(&mctl_com->unk_0x500, BIT(24), 0x300);
> + /* this write seems to enable PHY MMIO region */
> + setbits_le32(&mctl_com->unk_0x500, BIT(24));
> +
> + if (!mctl_phy_init(para))
> + return false;
> +
> + writel(0, &mctl_ctl->swctl);
> + clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
> +
> + setbits_le32(&mctl_com->unk_0x014, BIT(31));
> + writel(0xffffffff, &mctl_com->maer0);
> + writel(0x7ff, &mctl_com->maer1);
> + writel(0xffff, &mctl_com->maer2);
> +
> + writel(1, &mctl_ctl->swctl);
> + mctl_await_completion(&mctl_ctl->swstat, 1, 1);
> +
> + return true;
> +}
> +
> +static bool mctl_core_init(struct dram_para *para)
> +{
> + mctl_sys_init(para);
> +
> + return mctl_ctrl_init(para);
> +}
> +
> +static void mctl_auto_detect_rank_width(struct dram_para *para)
> +{
> + /* this is minimum size that it's supported */
> + para->cols = 8;
> + para->rows = 13;
> +
> + /*
> + * Strategy here is to test most demanding combination first and least
> + * demanding last, otherwise HW might not be fully utilized. For
> + * example, half bus width and rank = 1 combination would also work
> + * on HW with full bus width and rank = 2, but only 1/4 RAM would be
> + * visible.
> + */
> +
> + debug("testing 32-bit width, rank = 2\n");
> + para->bus_full_width = 1;
> + para->ranks = 2;
> + if (mctl_core_init(para))
> + return;
> +
> + debug("testing 32-bit width, rank = 1\n");
> + para->bus_full_width = 1;
> + para->ranks = 1;
> + if (mctl_core_init(para))
> + return;
> +
> + debug("testing 16-bit width, rank = 2\n");
> + para->bus_full_width = 0;
> + para->ranks = 2;
> + if (mctl_core_init(para))
> + return;
> +
> + debug("testing 16-bit width, rank = 1\n");
> + para->bus_full_width = 0;
> + para->ranks = 1;
> + if (mctl_core_init(para))
> + return;
> +
> + panic("This DRAM setup is currently not supported.\n");
> +}
> +
> +static void mctl_auto_detect_dram_size(struct dram_para *para)
> +{
> + /* detect row address bits */
> + para->cols = 8;
> + para->rows = 18;
> + mctl_core_init(para);
> +
> + for (para->rows = 13; para->rows < 18; para->rows++) {
> + /* 8 banks, 8 bit per byte and 16/32 bit width */
> + if (mctl_mem_matches((1 << (para->rows + para->cols +
> + 4 + para->bus_full_width))))
> + break;
> + }
> +
> + /* detect column address bits */
> + para->cols = 11;
> + mctl_core_init(para);
> +
> + for (para->cols = 8; para->cols < 11; para->cols++) {
> + /* 8 bits per byte and 16/32 bit width */
> + if (mctl_mem_matches(1 << (para->cols + 1 +
> + para->bus_full_width)))
> + break;
> + }
> +}
> +
> +static unsigned long mctl_calc_size(struct dram_para *para)
> +{
> + u8 width = para->bus_full_width ? 4 : 2;
> +
> + /* 8 banks */
> + return (1ULL << (para->cols + para->rows + 3)) * width * para->ranks;
> +}
> +
> +unsigned long sunxi_dram_init(void)
> +{
> + struct dram_para para = {
> + .clk = CONFIG_DRAM_CLK,
> + .type = SUNXI_DRAM_TYPE_DDR3,
> + };
> + unsigned long size;
> +
> + setbits_le32(0x7010310, BIT(8));
> + clrbits_le32(0x7010318, 0x3f);
> +
> + mctl_auto_detect_rank_width(¶);
> + mctl_auto_detect_dram_size(¶);
> +
> + mctl_core_init(¶);
> +
> + size = mctl_calc_size(¶);
> +
> + mctl_set_master_priority();
> +
> + return size;
> +};
> diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile b/arch/arm/mach-sunxi/dram_timings/Makefile
> index 0deb9911fd79..39a8756c297e 100644
> --- a/arch/arm/mach-sunxi/dram_timings/Makefile
> +++ b/arch/arm/mach-sunxi/dram_timings/Makefile
> @@ -3,3 +3,5 @@ obj-$(CONFIG_SUNXI_DRAM_LPDDR3_STOCK) += lpddr3_stock.o
> obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o
> obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o
> obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o
> +# currently only DDR3 is supported on H616
> +obj-$(CONFIG_MACH_SUN50I_H616) += h616_ddr3_1333.o
> diff --git a/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c b/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
> new file mode 100644
> index 000000000000..8f508344bc17
> --- /dev/null
> +++ b/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c
> @@ -0,0 +1,94 @@
> +/*
> + * sun50i H616 DDR3-1333 timings, as programmed by Allwinner's boot0
> + *
> + * The chips are probably able to be driven by a faster clock, but boot0
> + * uses a more conservative timing (as usual).
> + *
> + * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec at siol.net>
> + * Based on H6 DDR3 timings:
> + * (C) Copyright 2018,2019 Arm Ltd.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/dram.h>
> +#include <asm/arch/cpu.h>
> +
> +void mctl_set_timing_params(struct dram_para *para)
> +{
> + struct sunxi_mctl_ctl_reg * const mctl_ctl =
> + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
> +
> + u8 tccd = 2; /* JEDEC: 4nCK */
> + u8 tfaw = ns_to_t(50); /* JEDEC: 30 ns w/ 1K pages */
> + u8 trrd = max(ns_to_t(6), 4); /* JEDEC: max(6 ns, 4nCK) */
> + u8 trcd = ns_to_t(15); /* JEDEC: 13.5 ns */
> + u8 trc = ns_to_t(53); /* JEDEC: 49.5 ns */
> + u8 txp = max(ns_to_t(6), 3); /* JEDEC: max(6 ns, 3nCK) */
> + u8 trtp = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */
> + u8 trp = ns_to_t(15); /* JEDEC: >= 13.75 ns */
> + u8 tras = ns_to_t(38); /* JEDEC >= 36 ns, <= 9*trefi */
> + u16 trefi = ns_to_t(7800) / 32; /* JEDEC: 7.8us at Tcase <= 85C */
> + u16 trfc = ns_to_t(350); /* JEDEC: 160 ns for 2Gb */
> + u16 txsr = 4; /* ? */
> +
> + u8 tmrw = 0; /* ? */
> + u8 tmrd = 4; /* JEDEC: 4nCK */
> + u8 tmod = max(ns_to_t(15), 12); /* JEDEC: max(15 ns, 12nCK) */
> + u8 tcke = max(ns_to_t(6), 3); /* JEDEC: max(5.625 ns, 3nCK) */
> + u8 tcksrx = max(ns_to_t(10), 4); /* JEDEC: max(10 ns, 5nCK) */
> + u8 tcksre = max(ns_to_t(10), 4); /* JEDEC: max(10 ns, 5nCK) */
> + u8 tckesr = tcke + 1; /* JEDEC: tCKE(min) + 1nCK */
> + u8 trasmax = (para->clk / 2) / 15; /* JEDEC: tREFI * 9 */
> + u8 txs = ns_to_t(360) / 32; /* JEDEC: max(5nCK,tRFC+10ns) */
> + u8 txsdll = 16; /* JEDEC: 512 nCK */
> + u8 txsabort = 4; /* ? */
> + u8 txsfast = 4; /* ? */
> + u8 tcl = 7; /* JEDEC: CL / 2 => 6 */
> + u8 tcwl = 5; /* JEDEC: 8 */
> + u8 t_rdata_en = 9; /* ? */
> +
> + u8 twtp = 14; /* (WL + BL / 2 + tWR) / 2 */
> + u8 twr2rd = trtp + 7; /* (WL + BL / 2 + tWTR) / 2 */
> + u8 trd2wr = 5; /* (RL + BL / 2 + 2 - WL) / 2 */
> +
> + /* set DRAM timing */
> + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
> + &mctl_ctl->dramtmg[0]);
> + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
> + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
> + &mctl_ctl->dramtmg[2]);
> + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
> + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
> + &mctl_ctl->dramtmg[4]);
> + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
> + &mctl_ctl->dramtmg[5]);
> + /* Value suggested by ZynqMP manual and used by libdram */
> + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
> + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
> + &mctl_ctl->dramtmg[8]);
> + writel(0x00020208, &mctl_ctl->dramtmg[9]);
> + writel(0xE0C05, &mctl_ctl->dramtmg[10]);
> + writel(0x440C021C, &mctl_ctl->dramtmg[11]);
> + writel(8, &mctl_ctl->dramtmg[12]);
> + writel(0xA100002, &mctl_ctl->dramtmg[13]);
> + writel(txsr, &mctl_ctl->dramtmg[14]);
> +
> + clrbits_le32(&mctl_ctl->init[0], 3 << 30);
> + writel(0x420000, &mctl_ctl->init[1]);
> + writel(5, &mctl_ctl->init[2]);
> + writel(0x1f140004, &mctl_ctl->init[3]);
> + writel(0x00200000, &mctl_ctl->init[4]);
> +
> + writel(0, &mctl_ctl->dfimisc);
> + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
> +
> + /* Configure DFI timing */
> + writel((tcl - 2) | 0x2000000 | (t_rdata_en << 16) | 0x808000,
> + &mctl_ctl->dfitmg0);
> + writel(0x100202, &mctl_ctl->dfitmg1);
> +
> + /* set refresh timing */
> + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
> +}
More information about the U-Boot
mailing list