[RESEND PATCH v1 1/1] mmc: fix response timeout after switch command

[Stefan Bosch]

After issuing the switch command: Wait until 'current state' of the card
status becomes 'tran'. This prevents from response timeout at the next
command because of 'current state' = 'data'.

Signed-off-by: Stefan Bosch <stefan_b at posteo.net>
---

 drivers/mmc/mmc.c | 3 ++-
 include/mmc.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index a47700e313..8ccd2058a9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -823,7 +823,8 @@ static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value,
 				 value);
 			return -EIO;
 		}
-		if (!ret && (status & MMC_STATUS_RDY_FOR_DATA))
+		if (!ret && (status & MMC_STATUS_RDY_FOR_DATA) &&
+		    (status & MMC_STATUS_CURR_STATE) == MMC_STATE_TRANS)
 			return 0;
 		udelay(100);
 	} while (get_timer(start) < timeout_ms);
diff --git a/include/mmc.h b/include/mmc.h
index 1d377e0281..18402494c6 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -178,6 +178,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
 #define MMC_STATUS_ERROR	(1 << 19)
 
 #define MMC_STATE_PRG		(7 << 9)
+#define MMC_STATE_TRANS		(4 << 9)
 
 #define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
 #define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
-- 
2.17.1