[PATCH 1/2] imx8mm_beacon: Enable fixed regulator in SPL

[sbabic at denx.de]

> Because SPL can support SD UHS, the fixed regulator needs to be
> enabled in SPL to reset the SD card.
> Fixes: 1a5d9c84b472 ("imx8mm_beacon: Enable HS400 on MMC controller")
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig
> index 49d5453078..b0ea87a58c 100644
> --- a/configs/imx8mm_beacon_defconfig
> +++ b/configs/imx8mm_beacon_defconfig
> @@ -95,6 +95,7 @@ CONFIG_SPL_DM_REGULATOR=y
>  CONFIG_DM_REGULATOR_BD71837=y
>  CONFIG_SPL_DM_REGULATOR_BD71837=y
>  CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_SPL_DM_REGULATOR_FIXED=y
>  CONFIG_DM_REGULATOR_GPIO=y
>  CONFIG_CONS_INDEX=2
>  CONFIG_DM_SERIAL=y
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================