[PATCH] Replace video_uc_platdata with video_uc_plat

[Dario Binacchi]

The video_uc_platdata structure no longer exists. It has been renamed
video_uc_plat.

Signed-off-by: Dario Binacchi <dariobin at libero.it>
---

 drivers/video/Kconfig          | 4 ++--
 drivers/video/nexell_display.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d782eb806a..bdacf67795 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -30,7 +30,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE
 	help
 	  Generally, video drivers request the amount of memory they need for
 	  the frame buffer when they are bound, by setting the size field in
-	  struct video_uc_platdata. That memory is then reserved for use after
+	  struct video_uc_plat. That memory is then reserved for use after
 	  relocation. But PCI drivers cannot be bound before relocation unless
 	  they are mentioned in the devicetree.
 
@@ -51,7 +51,7 @@ config VIDEO_COPY
 	  U-Boot) and then copied to the hardware frame-buffer as needed.
 
 	  To use this, your video driver must set @copy_base in
-	  struct video_uc_platdata.
+	  struct video_uc_plat.
 
 config BACKLIGHT_PWM
 	bool "Generic PWM based Backlight Driver"
diff --git a/drivers/video/nexell_display.c b/drivers/video/nexell_display.c
index b47bef3578..c7621ef49c 100644
--- a/drivers/video/nexell_display.c
+++ b/drivers/video/nexell_display.c
@@ -15,7 +15,7 @@
 #include <malloc.h>
 #include <linux/compat.h>
 #include <linux/err.h>
-#include <video.h>		/* For struct video_uc_platdata */
+#include <video.h>		/* For struct video_uc_plat */
 #include <video_fb.h>
 #include <lcd.h>
 #include <asm/global_data.h>
-- 
2.17.1