[PATCH v3 11/16] gpio: Replace direction_input() and direction_output()

[Simon Glass]

The new update_flags() method is more flexible since it allows the
driver to see the full flags all at once. Use that in preference to these
two functions. Add comments to that effect.

Signed-off-by: Simon Glass <sjg at chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

(no changes since v1)

 drivers/gpio/gpio-uclass.c | 15 ++++++---------
 include/asm-generic/gpio.h | 26 +++++++++++++++++++++++++-
 2 files changed, 31 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index b74976ed951..c2702fae1f9 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -512,13 +512,10 @@ int gpio_direction_input(unsigned gpio)
 	int ret;
 
 	ret = gpio_to_device(gpio, &desc);
-	if (ret)
-		return ret;
-	ret = check_reserved(&desc, "dir_input");
 	if (ret)
 		return ret;
 
-	return gpio_get_ops(desc.dev)->direction_input(desc.dev, desc.offset);
+	return dm_gpio_clrset_flags(&desc, GPIOD_MASK_DIR, GPIOD_IS_IN);
 }
 
 /**
@@ -533,17 +530,17 @@ int gpio_direction_input(unsigned gpio)
 int gpio_direction_output(unsigned gpio, int value)
 {
 	struct gpio_desc desc;
+	ulong flags;
 	int ret;
 
 	ret = gpio_to_device(gpio, &desc);
-	if (ret)
-		return ret;
-	ret = check_reserved(&desc, "dir_output");
 	if (ret)
 		return ret;
 
-	return gpio_get_ops(desc.dev)->direction_output(desc.dev,
-							desc.offset, value);
+	flags = GPIOD_IS_OUT;
+	if (value)
+		flags |= GPIOD_IS_OUT_ACTIVE;
+	return dm_gpio_clrset_flags(&desc, GPIOD_MASK_DIR, flags);
 }
 
 static int _gpio_get_value(const struct gpio_desc *desc)
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index af3ce21a7cf..457ecb19cd3 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -260,10 +260,32 @@ int gpio_xlate_offs_flags(struct udevice *dev, struct gpio_desc *desc,
 struct dm_gpio_ops {
 	int (*request)(struct udevice *dev, unsigned offset, const char *label);
 	int (*rfree)(struct udevice *dev, unsigned int offset);
+
+	/**
+	 * direction_input() - deprecated
+	 *
+	 * Equivalent to set_flags(...GPIOD_IS_IN)
+	 */
 	int (*direction_input)(struct udevice *dev, unsigned offset);
+
+	/**
+	 * direction_output() - deprecated
+	 *
+	 * Equivalent to set_flags(...GPIOD_IS_OUT) with GPIOD_IS_OUT_ACTIVE
+	 * also set if @value
+	 */
 	int (*direction_output)(struct udevice *dev, unsigned offset,
 				int value);
+
 	int (*get_value)(struct udevice *dev, unsigned offset);
+
+	/**
+	 * set_value() - Sets the GPIO value of an output
+	 *
+	 * If the driver provides an @set_flags() method then that is used
+	 * in preference to this, with GPIOD_IS_OUT_ACTIVE set according to
+	 * @value.
+	 */
 	int (*set_value)(struct udevice *dev, unsigned offset, int value);
 	/**
 	 * get_function() Get the GPIO function
@@ -320,7 +342,9 @@ struct dm_gpio_ops {
 	 * uclass, so the driver always sees the value that should be set at the
 	 * pin (1=high, 0=low).
 	 *
-	 * This method is optional.
+	 * This method is required and should be implemented by new drivers. At
+	 * some point, it will supersede direction_input() and
+	 * direction_output(), which wil be removed.
 	 *
 	 * @dev:	GPIO device
 	 * @offset:	GPIO offset within that device
-- 
2.30.0.280.ga3ce27912f-goog