[PATCH 1/1] doc: remove illegal characters
xypron.glpk at gmx.de
Mon Jan 25 22:48:56 CET 2021
Avoid errors when generating the HTML documentation like:
'ascii' codec can't decode byte 0xc2
Correct capitalization of 'U-Boot'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
doc/board/freescale/b4860qds.rst | 2 +-
doc/board/microchip/mpfs_icicle.rst | 4 ++--
doc/board/sifive/fu540.rst | 2 +-
doc/board/xen/xenguest_arm64.rst | 14 +++++++-------
doc/driver-model/design.rst | 2 +-
doc/usage/bootmenu.rst | 2 +-
6 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/doc/board/freescale/b4860qds.rst b/doc/board/freescale/b4860qds.rst
index de14d857b9..efb1422e1c 100644
@@ -9,7 +9,7 @@ The B4860QDS is a Freescale reference board that hosts the B4860 SoC
The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
-StarCore and Power Architecture® cores. It targets the broadband wireless
+StarCore and Power Architecture cores. It targets the broadband wireless
infrastructure and builds upon the proven success of the existing multicore
DSPs and Power CPUs. It is designed to bolster the rapidly changing and
expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
diff --git a/doc/board/microchip/mpfs_icicle.rst b/doc/board/microchip/mpfs_icicle.rst
index c71c2f3cab..1f9ce13a3c 100644
@@ -702,9 +702,9 @@ Sample boot log from MPFS Icicle Kit
[ 2.756098] systemd: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 2.789065] systemd: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
+ [ OK ] Started Dispatch Password ..ts to Console Directory Watch.
[ 2.828974] systemd: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
+ [ OK ] Started Forward Password R..uests to Wall Directory Watch.
[ 2.869009] systemd: Reached target Paths.
[ OK ] Reached target Paths.
[ 2.898808] systemd: Reached target Remote File Systems.
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 4e4c852ff3..c8091f6490 100644
@@ -5,7 +5,7 @@ HiFive Unleashed
FU540-C000 RISC-V SoC
-The FU540-C000 is the world’s first 4+1 64-bit RISC-V SoC from SiFive.
+The FU540-C000 is the world's first 4+1 64-bit RISC-V SoC from SiFive.
The HiFive Unleashed development platform is based on FU540-C000 and capable
of running Linux.
diff --git a/doc/board/xen/xenguest_arm64.rst b/doc/board/xen/xenguest_arm64.rst
index 1327f88f99..31a5c23dfd 100644
@@ -6,17 +6,17 @@ Xen guest ARM64 board
This board specification
-This board is to be run as a virtual Xen  guest with U-boot as its primary
+This board is to be run as a virtual Xen  guest with U-Boot as its primary
bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
to run simultaneously on a single physical server. Xen is capable of running
virtual machines in both full virtualization and para-virtualization (PV)
-modes. Xen runs virtual machines, which are called “domains”.
+modes. Xen runs virtual machines, which are called "domains".
Paravirtualized drivers are a special type of device drivers that are used in
a guest system in the Xen domain and perform I/O operations using a special
interface provided by the virtualization system and the host system.
-Xen support for U-boot is implemented by introducing a new Xen guest ARM64
+Xen support for U-Boot is implemented by introducing a new Xen guest ARM64
board and porting essential drivers from MiniOS  as well as some of the work
previously done by NXP :
@@ -39,7 +39,7 @@ previously done by NXP :
-1. U-boot runs without MMU enabled at the early stages.
+1. U-Boot runs without MMU enabled at the early stages.
According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
which is shared with other entities in the system (including the hypervisor
and other guests) must reside in memory which is mapped as Normal Inner
@@ -54,14 +54,14 @@ Board limitations
2. No serial console until MMU is up.
Because data cache maintenance is required until the MMU setup the
early/debug serial console is not implemented. Therefore, we do not have
- usual prints like U-boot’s banner etc. until the serial driver is
+ usual prints like U-Boot's banner etc. until the serial driver is
3. Single RAM bank supported.
If a Xen guest is given much memory it is possible that Xen allocates two
memory banks for it. The first one is allocated under 4GB address space and
- in some cases may represent the whole guest’s memory. It is assumed that
- U-boot most likely won’t require high memory bank for its work andlaunching
+ in some cases may represent the whole guest's memory. It is assumed that
+ U-Boot most likely won't require high memory bank for its work andlaunching
OS, so it is enough to take the first one.
diff --git a/doc/driver-model/design.rst b/doc/driver-model/design.rst
index ffed7d5f79..93a9f3dc41 100644
@@ -10,7 +10,7 @@ by:
* Marek Vasut <marex at denx.de>
* Pavel Herrmann <morpheus.ibis at gmail.com>
- * Viktor Křivák <viktor.krivak at gmail.com>
+ * Viktor Krivak <viktor.krivak at gmail.com>
* Tomas Hlavacek <tmshlvck at gmail.com>
This has been both simplified and extended into the current implementation
diff --git a/doc/usage/bootmenu.rst b/doc/usage/bootmenu.rst
index 1f094ad6ed..44654acced 100644
@@ -1,5 +1,5 @@
.. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2011-2012 Pali Rohár <pali at kernel.org>
+.. (C) Copyright 2011-2012 Pali Rohar <pali at kernel.org>
More information about the U-Boot