[PATCH v2 2/4] fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2

Patrick Delaunay patrick.delaunay at foss.st.com
Wed Jan 27 14:46:47 CET 2021


Update the code and the configs for eMMC boot and userdata
partitions acces
- FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write)
- FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0"
- FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1"

This patch also removes the unnecessary dependency with
ARCH_MEDIATEK and EFI_PARTITION.

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

Changes in v2:
- new impact on pumpkin_defconfig and mt8512_bm1_emmc_defconfig

 configs/mt8512_bm1_emmc_defconfig |  2 +-
 configs/mt8518_ap1_emmc_defconfig |  2 +-
 configs/pumpkin_defconfig         |  2 +-
 drivers/fastboot/Kconfig          | 26 ++++++++++++-----
 drivers/fastboot/fb_mmc.c         | 47 ++++++++++++++++++++-----------
 5 files changed, 52 insertions(+), 27 deletions(-)

diff --git a/configs/mt8512_bm1_emmc_defconfig b/configs/mt8512_bm1_emmc_defconfig
index 1bda45c5d2..d8e0e86c10 100644
--- a/configs/mt8512_bm1_emmc_defconfig
+++ b/configs/mt8512_bm1_emmc_defconfig
@@ -28,7 +28,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x56000000
 CONFIG_FASTBOOT_BUF_SIZE=0x1e00000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
 CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/mt8518_ap1_emmc_defconfig b/configs/mt8518_ap1_emmc_defconfig
index d5fb0ccd48..2c760c1591 100644
--- a/configs/mt8518_ap1_emmc_defconfig
+++ b/configs/mt8518_ap1_emmc_defconfig
@@ -24,7 +24,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x56000000
 CONFIG_FASTBOOT_BUF_SIZE=0x1E00000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
 CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_HS200_SUPPORT=y
diff --git a/configs/pumpkin_defconfig b/configs/pumpkin_defconfig
index a9655f5abb..5270ec28cb 100644
--- a/configs/pumpkin_defconfig
+++ b/configs/pumpkin_defconfig
@@ -52,7 +52,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x4d000000
 CONFIG_FASTBOOT_BUF_SIZE=0x4000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
 CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 # CONFIG_INPUT is not set
 CONFIG_DM_MMC=y
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index cb8425685f..ef57290876 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -104,18 +104,19 @@ config FASTBOOT_FLASH_NAND_TRIMFFS
 	  When flashing NAND enable the DROP_FFS flag to drop trailing all-0xff
 	  pages.
 
-config FASTBOOT_MMC_BOOT1_SUPPORT
-	bool "Enable EMMC_BOOT1 flash/erase"
-	depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+config FASTBOOT_MMC_BOOT_SUPPORT
+	bool "Enable EMMC_BOOT flash/erase"
+	depends on FASTBOOT_FLASH_MMC
 	help
 	  The fastboot "flash" and "erase" commands normally does operations
-	  on EMMC userdata. Define this to enable the special commands to
-	  flash/erase EMMC_BOOT1.
-	  The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+	  on eMMC userdata. Define this to enable the special commands to
+	  flash/erase eMMC boot partition.
+	  The default target name for updating eMMC boot partition 1/2 is
+	  CONFIG_FASTBOOT_MMC_BOOT1_NAME/CONFIG_FASTBOOT_MMC_BOOT2_NAME.
 
 config FASTBOOT_MMC_BOOT1_NAME
 	string "Target name for updating EMMC_BOOT1"
-	depends on FASTBOOT_MMC_BOOT1_SUPPORT
+	depends on FASTBOOT_MMC_BOOT_SUPPORT
 	default "mmc0boot0"
 	help
 	  The fastboot "flash" and "erase" commands support operations on
@@ -124,6 +125,17 @@ config FASTBOOT_MMC_BOOT1_NAME
 	  defined here.
 	  The default target name for updating EMMC_BOOT1 is "mmc0boot0".
 
+config FASTBOOT_MMC_BOOT2_NAME
+	string "Target name for updating EMMC_BOOT2"
+	depends on FASTBOOT_MMC_BOOT_SUPPORT
+	default "mmc0boot1"
+	help
+	  The fastboot "flash" and "erase" commands support operations on
+	  EMMC_BOOT2. This occurs when the specified "EMMC_BOOT2 name" on
+	  the "fastboot flash" and "fastboot erase" commands match the value
+	  defined here.
+	  The default target name for updating EMMC_BOOT2 is "mmc0boot1".
+
 config FASTBOOT_MMC_USER_SUPPORT
 	bool "Enable eMMC userdata partition flash/erase"
 	depends on FASTBOOT_FLASH_MMC
diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c
index b5d4c90bfc..611074a3e4 100644
--- a/drivers/fastboot/fb_mmc.c
+++ b/drivers/fastboot/fb_mmc.c
@@ -174,7 +174,7 @@ static void write_raw_image(struct blk_desc *dev_desc,
 	fastboot_okay(NULL, response);
 }
 
-#if defined(CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT) || \
+#if defined(CONFIG_FASTBOOT_MMC_BOOT_SUPPORT) || \
 	defined(CONFIG_FASTBOOT_MMC_USER_SUPPORT)
 static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
 {
@@ -196,16 +196,16 @@ static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
 }
 #endif
 
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
-static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
-			     u32 buff_sz, char *response)
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
+static void fb_mmc_boot_ops(struct blk_desc *dev_desc, void *buffer,
+			    int hwpart, u32 buff_sz, char *response)
 {
 	lbaint_t blkcnt;
 	lbaint_t blks;
 	unsigned long blksz;
 
-	// To operate on EMMC_BOOT1 (mmc0boot0), we first change the hwpart
-	if (blk_dselect_hwpart(dev_desc, 1)) {
+	// To operate on EMMC_BOOT1/2 (mmc0boot0/1) we first change the hwpart
+	if (blk_dselect_hwpart(dev_desc, hwpart)) {
 		pr_err("Failed to select hwpart\n");
 		fastboot_fail("Failed to select hwpart", response);
 		return;
@@ -224,21 +224,24 @@ static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
 			return;
 		}
 
-		debug("Start Flashing Image to EMMC_BOOT1...\n");
+		debug("Start Flashing Image to EMMC_BOOT%d...\n", hwpart);
 
 		blks = fb_mmc_blk_write(dev_desc, 0, blkcnt, buffer);
 
 		if (blks != blkcnt) {
-			pr_err("Failed to write EMMC_BOOT1\n");
-			fastboot_fail("Failed to write EMMC_BOOT1", response);
+			pr_err("Failed to write EMMC_BOOT%d\n", hwpart);
+			fastboot_fail("Failed to write EMMC_BOOT part",
+				      response);
 			return;
 		}
 
-		printf("........ wrote %lu bytes to EMMC_BOOT1\n",
-		       blkcnt * blksz);
+		printf("........ wrote %lu bytes to EMMC_BOOT%d\n",
+		       blkcnt * blksz, hwpart);
 	} else { /* erase */
 		if (fb_mmc_erase_mmc_hwpart(dev_desc)) {
-			fastboot_fail("Failed to erase EMMC_BOOT1", response);
+			pr_err("Failed to erase EMMC_BOOT%d\n", hwpart);
+			fastboot_fail("Failed to erase EMMC_BOOT part",
+				      response);
 			return;
 		}
 	}
@@ -467,10 +470,15 @@ void fastboot_mmc_flash_write(const char *cmd, void *download_buffer,
 		return;
 	}
 
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
 	if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
-		fb_mmc_boot1_ops(dev_desc, download_buffer,
-				 download_bytes, response);
+		fb_mmc_boot_ops(dev_desc, download_buffer, 1,
+				download_bytes, response);
+		return;
+	}
+	if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT2_NAME) == 0) {
+		fb_mmc_boot_ops(dev_desc, download_buffer, 2,
+				download_bytes, response);
 		return;
 	}
 #endif
@@ -598,10 +606,15 @@ void fastboot_mmc_erase(const char *cmd, char *response)
 		return;
 	}
 
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
 	if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
 		/* erase EMMC boot1 */
-		fb_mmc_boot1_ops(dev_desc, NULL, 0, response);
+		fb_mmc_boot_ops(dev_desc, NULL, 1, 0, response);
+		return;
+	}
+	if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT2_NAME) == 0) {
+		/* erase EMMC boot2 */
+		fb_mmc_boot_ops(dev_desc, NULL, 2, 0, response);
 		return;
 	}
 #endif
-- 
2.17.1



More information about the U-Boot mailing list