[PATCH v4 18/21] configs: j7200_evm: Add support for UHS modes

[Aswath Govindraju]

From: Faiz Abbas <faiz_abbas at ti.com>

Add configs to support UHS modes for the SD card and HS400 for the eMMC[1].

[1] - section 12.3.6.1.1 MMCSD Features, in
      https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
---
 configs/j7200_evm_a72_defconfig | 8 ++++++++
 configs/j7200_evm_r5_defconfig  | 1 +
 2 files changed, 9 insertions(+)

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 1d2526b5f1b2..2146e47dc4b9 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -111,11 +111,16 @@ CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
 CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
@@ -143,6 +148,9 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
 CONFIG_REMOTEPROC_TI_K3_R5F=y
diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
index 3820fc508b38..e1cb16e4740c 100644
--- a/configs/j7200_evm_r5_defconfig
+++ b/configs/j7200_evm_r5_defconfig
@@ -89,6 +89,7 @@ CONFIG_K3_SEC_PROXY=y
 CONFIG_FS_LOADER=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
-- 
2.17.1