[PATCH v2 1/4] thermal: imx_tmu: enable monitoring and default alert/critical

[sbabic at denx.de]

> Set default critical/alert temperature and enabling monoitoring.
> Without calling imx_tmu_enable_msite() monitoring will not be enabled
> and read_temperature will return 0. Additionally without setting alert
> temperature will cause imx_tmu_get_temp() to spin indefiniately thinking
> the system needs to cool.
> This resolves the board spinning endlessly when enabling IMX_TMU in the
> SPL.
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================